General Fabrication 6-15mm
General fabrication refers to common types of processes when working in plate.
General fabrication usually includes all common ways to work sheet metal; normally cutting, press brake work , treatment and assembling. In this category, the sheet metal's thickness ranges from 6 to 15 mm. Other thicknesses can be found in the general sheet metal or heavy fabrication categories. The material used in general fabrication is a thicker piece of sheet metal. Still, this means its length and width is considerably larger than its width.
Latest RFQs
-
Fabrication-General Fabrication 6-15mm
Description: This Buyer is looking for a supplier to manufacture this Wind break
-
Fabrication-General Fabrication 6-15mm
Description: General fabrication of heat exchanger frame assembly for a company who regularly awards and spends approximately £100,000 on fabricated parts.
-
Fabrication-General Fabrication 6-15mm
Description: Exciting project from a large company within the Oil & Gas Industry and has a turnover in excess of £100M per annum. They have an annual spend for outsourced fabrication of £300,000.
Now looking for the complete manufacture of a frame and a reservoir for an oil rig.
Material used is Carbon Steel & Stainless Steel
-
Fabrication-General Fabrication 6-15mm
Description: Looking for companies to punch and bend plates for a company who regularly awards work and spends £50,000 p/a on fabricated parts.
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of a tank lides, sides etc, used in the manufacture of Hydraulics equipment.
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of knives. Used in the manufacture of Food equipment.
Material - Stainless Steel 304L
Free issue
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of Plates and Columns. Used in the manufacture of Generators.
-
Fabrication-General Fabrication 6-15mm
Description: These 4 rail sections will replace existing rail parts of a support frame for an air turbine.
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication & Welding of Automotive Brackets.
-
Fabrication-General Fabrication 6-15mm
Description: Bending of a Stainless Steel Horseshoe guide.
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of Square plates
-
Fabrication-General Fabrication 6-15mm
Description: Cutting, bending & folding of Covers.
Material - Stainless steel 304 - 10 mm thick
-
Fabrication-General Fabrication 6-15mm
Description: Machining & Bending of Brackets.
Material ST 75 - Free Issue
-
Fabrication-General Fabrication 6-15mm
Description: Basic Fabrication of Plates,Foot Pedals & Brackets.
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of Protection Rails.
-
Fabrication-General Fabrication 6-15mm
Description: Stainless Steel 316g Fabricated Brackets used for handrails and balustrades.
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of Skid Bases (incorporating a fuel tank) and lifting Frame.
Complete to drawing.
-
Fabrication-General Fabrication 6-15mm
Description: General fabrication of roller ring half segments
-
Fabrication-General Fabrication 6-15mm
Description: Cutting, Welding & Drilling of Brackets.
Material - 40mm x 6mm Steel angle.
No paint finish required.
-
Fabrication-General Fabrication 6-15mm
Description: Cutting, folding etc of Channels.
Material Stainless Steel 304, 6mm thick
-
Fabrication-General Fabrication 6-15mm
Description: Cutting, bending, Drilling & countersinking of Plates.
Material Durbar
-
Fabrication-General Fabrication 6-15mm
Description: To Cut box section to lengths and produce holes in sections.
-
Fabrication-General Fabrication 6-15mm
Description: Cutting and drilling of Wear Plates.
Material - Mild Steel 10mm thick.
6 x double sided csk M6 holes – at various points down centre -
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of Battery Connectors.
Material - Copper bar
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of a complete Sub-frame
Material -
Aluminium box section
Aluminium
-
Fabrication-General Fabrication 6-15mm
Description: Fabrication of Flanges & Channel profiles.
-
Fabrication-General Fabrication 6-15mm
Description: Folding of angles and channels used for handrails and balustrades
-
Fabrication-General Fabrication 6-15mm
Description: Cutting, bending & folding of all metal panel sections. Assembly not required.
-
Fabrication-General Fabrication 6-15mm
Description: Manufacture of braces, plates, brackets, covers and hinge assemblies for use in industrial machinery. There are a mixture of material thicknesses here and so also going out to General Sheet Metal.