Latest RFQs

• Machining-Machining, CNC Description: Humidifier Lid MS101465 to be supplied complete to drawing, including surface finish and silk screening.
• Machining-Machining, CNC Description: Material Handling Machinery Component - Adaptor Plate For Splined Motor
• Machining-Machining, CNC Description: Machining of a bearing housing for use in industrial machinery.
• Machining-Machining, CNC Description: Machining of pins.
• Machining-Machining, CNC Description: Machining of free issue extrustions for use in greenhouses.
• Machining-Machining, CNC Description: Machining of cast Inserts.
• Machining-Machining, CNC Description: Machining from solid of solenoid Frames.
• Machining-Machining, CNC Description: Manufacture of components for use in semiconductors and heating equipment. Due to the quantities, this is also going to conventional machining.
• Machining-Machining, CNC Description: Machining of medical components.
• Machining-Machining, CNC Description: Elbow - Yellow Goods end application
• Machining-Machining, CNC Description: Machining of Collets, Clamping Nuts & Adapter Nuts.
• Machining-Machining, CNC Description: Machining & polishing of free issue castings for use in the medical industry. There will also be some measuring required to 5 microns.
• Machining-Machining, CNC Description: Machining of bushes. Used in general engineering.
• Machining-Machining, CNC Description: Machining of Strikers, Cutters & Anvils. Free issue protective cap for the Cutter.
• Machining-Machining, CNC Description: Machining of Stems Machining only (including Marking and completion of Critical Dimension Record sheets)
• Machining-Machining, CNC Description: Machining from solid of Bush housing.
• Machining-Machining, CNC Description: (1) Output Shaft (2) Shoulder (3) Setting block (4) Wheel Side Plates
• Machining-Machining, CNC Description: Very Urgent Requirement Various small batches of parts, ie, photo diode mounts, sensor housings, milling and turning anodise and paint finishing NOT required at this stage. Please refer to all drawings for a list of components.
• Machining-Machining, CNC Description: Machined parts for equipment used in opticians.
• Machining-Machining, CNC Description: Handrails for use in construction.
• Machining-Machining, CNC Description: Manufacture of bushes & guide holders for use in sensor equipment.
• Machining-Machining, CNC Description: Machining of free issue castings for use in hydraulics.
• Machining-Machining, CNC Description: Machining of stands. Used in the manufacture of autosport accessories.
• Machining-Machining, CNC Description: Machining of tubes, rings, sleeves etc. Used in the manufacture of automotive equipment.
• Machining-Machining, CNC Description: Rails (two dimensional versions) - Medical Industry end application
• Machining-Machining, CNC Description: Machining of Dual seat Assembly
• Machining-Machining, CNC Description: CNC turning and milling of various components, ie, pins, bosses and brackets which are used for security equipment.
• Machining-Machining, CNC Description: Machining of free issue castings used for various industries like aerospace, automotive and rail.
• Machining-Machining, CNC Description: Turning, drilling and tapping of pressure pads,pressure bars, load spreaders and tension indicators used for power rectifiers.
• Machining-Machining, CNC Description: Machining of Pins. Used in the automotive industry.
• Machining-Machining, CNC Description: Machining of cones. Used in general engineering.
• Machining-Machining, CNC Description: Turning, drilling and tapping of handrail holders, inline rods and glass lugs used for the manufacture of handrails and balustrades.
• Machining-Machining, CNC Description: Maufacture of switch protectors for use in sports motorcycles.
• Machining-Machining, CNC Description: Turning, drilling and some milling of shower head housing used for hand wash units.
• Machining-Machining, CNC Description: Machining of spacers, used in general engineering.
• Machining-Machining, CNC Description: Machining of pins & bearings, plus the occasional keyed shafts. Used in the manufacture of switchgear equipment.
• Machining-Machining, CNC Description: Manufacture of components for use in oil filter assemblies in Taxi's
• Machining-Machining, CNC Description: Manufacture of clamps for use on overhead powerlines.
• Machining-Machining, CNC Description: Machining of plug, lift pump mounting covers, plug hydraulic lift valve blocks & remote valves for automotive useage. Please refer to all drawings for component details.
• Machining-Machining, CNC Description: COMPONENTS FOR HYDRAULIC CYLINDERS FOR THE MOBILE VECHILE INDUSTRIES
• Machining-Machining, CNC Description: Machining of centre mid rails, screens, tiebars and front lower bars used for metal analysis systems.
• Machining-Machining, CNC Description: Machining of Aluminium chassis, Used in the Aerospace Industry.
• Machining-Machining, CNC Description: Low quantity Aluminium and nylon machining. 10 off required. Possibility of receiving more orders in the future.
• Machining-Machining, CNC Description: Machining of a washer. Used in the manufacture of medical equipment.
• Machining-Machining, CNC Description: Machining of plunger independant power take off clutch valve.
• Machining-Machining, CNC Description: Re-reported due to lack of response. Originaaly reported on 28th April 2010. Manufacture of components for use in tables.
• Machining-Machining, CNC Description: Special Purpose Machine Parts
• Machining-Machining, CNC Description: Bodytube (musical instrument end application)
• Machining-Machining, CNC Description: Machining of housings & ferrules.
• Machining-Machining, CNC Description: Machining of Hatchlocks
• Machining-Machining, CNC Description: Machining of studs.M16
• Machining-Machining, CNC Description: Aluminium bearing plate & hardened adaptor plates.
• Machining-Machining, CNC Description: Machining of bushes.
• Machining-Machining, CNC Description: Twelve items in all (As detailed on Quotation Request Documents - Available for viewing online, now).
• Machining-Machining, CNC Description: Machining of inner and outer mounting plates used for the rail industry.
• Machining-Machining, CNC Description: Turning, milling and drilling of half sockets and sockets
• Machining-Machining, CNC Description: Turning, milling and drilling of female, male screws & spacers used for special purpose machinery.
• Machining-Machining, CNC Description: Manufacture of a receptacle shell and retaining plate for use in the aerospace industry.
• Machining-Machining, CNC Description: Manufacture of components for use in lighting equipment.
• Machining-Machining, CNC Description: Manufacture of components for use in a hand held pressure metre.
• Machining-Machining, CNC Description: Turning, milling and some drilling of washer track bolts, thrust washers, hinge pins and cupholder bushes. Please refer to drawings for all components.
• Machining-Machining, CNC Description: Machining of pump components.
• Machining-Machining, CNC Description: Four component piece parts per set: (1) Bezel (2) Heatsink (3) Clamp (4) Mount Disc
• Machining-Machining, CNC Description: Manufacture of drive shafts,
• Machining-Machining, CNC Description: Machining of spacers, caps, adjusters & collars. Now also being sent to High Precision Machining.
• Machining-Machining, CNC Description: Machining of studs.
• Machining-Machining, CNC Description: An Integral Component For Special Purpose Machinery
• Machining-Machining, CNC Description: Punch Block (Printing Machinery end application)
• Machining-Machining, CNC Description: Machining of elevation input shafts used for the manufacture of TV aerials.
• Machining-Machining, CNC Description: Machining of flanges.
• Machining-Machining, CNC Description: Aluminium Parts to be machined as per cad data files supplied. Please quote each part by file name individually. All parts one off items
• Machining-Machining, CNC Description: Machining of front & rear baluster bosses used for the construction industry.
• Machining-Machining, CNC Description: KEYED DRIVE SHAFT
• Machining-Machining, CNC Description: Machining of components, used in the manufacture of special purpose machines.
• Machining-Machining, CNC Description: Machining of stainless steel components.
• Machining-Machining, CNC Description: RE-reporting, low response Machining of Ports & valves. Used in Industrial pipework.
• Machining-Machining, CNC Description: Turning, milling and drilling of hubs, bearing housings, magnet plates and front plates
• Machining-Machining, CNC Description: Turning, milling & drilling of connector shells & connector housings.
• Machining-Machining, CNC Description: Turning and drilling of baluster clamps used for the construction industry.
• Machining-Machining, CNC Description: Machining of collars, bushes etc. Used in the manufacture of chassis.
• Machining-Machining, CNC Description: Aluminium parts machined from Extrusions (free issue), also parts machined from materials sourced by supplier.
• Machining-Machining, CNC Description: Machining of shafts. Used in the automotive industry.
• Machining-Machining, CNC Description: Manufacture of brackets and clamps for use in ballustrades
• Machining-Machining, CNC Description: Turning, milling and drilling of suspension clamps, spring washers & spacers.
• Machining-Machining, CNC Description: Machining of bosses. Used in the manufacture of retail fittings.
• Machining-Machining, CNC Description: Aluminium track plates.
• Machining-Machining, CNC Description: Turning of spindles.
• Machining-Machining, CNC Description: Machine only from free issue castings, two different parts.
• Machining-Machining, CNC Description: Machining from solid of candle holder bases.
• Machining-Machining, CNC Description: Machining of bushes.
• Machining-Machining, CNC Description: Milling, turning & some wire erosion of tooling plates and plates
• Machining-Machining, CNC Description: Machining of body sheets. Used in the manufacture of safety equipment.
• Machining-Machining, CNC Description: For Motorcycles: (1) Rear Head Stud (2) Front Head Stud (3) Timing Side Crankcase (4) Lubrication Pump Cover
• Machining-Machining, CNC Description: Turning, milling & knurling of rear fitting hose insert.
• Machining-Machining, CNC Description: Turning, drilling, milling, grinding and heat treatment of clutch valves.
• Machining-Machining, CNC Description: Machining of Burner tips.
• Machining-Machining, CNC Description: Turning, drilling and knurling of protective caps, outlet nuts, union nuts, free shells and panel mounting rings. Please refer to drawings for all components.
• Machining-Machining, CNC Description: Machining O ring nuts.
• Machining-Machining, CNC Description: Face machining of fan blades. 1 pass machining on each side.
• Machining-Machining, CNC Description: Turning of bolts & nuts for heating and ventilation equipment.
• Machining-Machining, CNC Description: Chamber - Tube Adaptor
• Machining-Machining, CNC Description: Machining of bars and plates.
• Machining-Machining, CNC Description: 18 Items in all require quotation currently - Includes: Tube Connectors (several variants) & Cap Header Condenser units
• Machining-Machining, CNC Description: Machining of front and back plates.
• Machining-Machining, CNC Description: RE_REPORTING one component as low response. Drawing number 010181A, now 8-10 off. Originally reported 09/11/09. Machining of pipe connectors, tie bars & bolts.
• Machining-Machining, CNC Description: Machining from solid of plates.
• Machining-Machining, CNC Description: Stud Bolts x9 variants (plus allied nuts & washers) - Industrial gasket/hose end applications
• Machining-Machining, CNC Description: Machining of frames from billets.
• Machining-Machining, CNC Description: Machining and fabrication of sleeves
• Machining-Machining, CNC Description: Shaft bearings & nimak bearings used for a Service kit
• Machining-Machining, CNC Description: Re-Reporting with Extended lead time, Machining (many are Sliding Head) of stems, screws, bushes etc.
• Machining-Machining, CNC Description: Variable Speed Drive Rear Lid & Enclosure Lid
• Machining-Machining, CNC Description: Machining of an Impeller Suppliers will need a 4th axis milling machine, or a lathe with 4 axis
• Machining-Machining, CNC Description: Machined alloy components for articulated foot assemblies
• Machining-Machining, CNC Description: Manufacture of shaft bearings, nuts, spacer rings, blisks, stators,bulkheads, manifolds, tubes and housings for use in gas turbine engines for electric cars.
• Machining-Machining, CNC Description: Machining of Jacking feet & Jacking screws.
• Machining-Machining, CNC Description: Turning, milling and drilling of valve clamping bars, air pumps, adaptor plates & coupling collars used for pumps and plant equipment. Please refer to drawings for all components.
• Machining-Machining, CNC Description: mild steel plug required. made from 18 mm sq stock and machined as show on drawing
• Machining-Machining, CNC Description: STD PALM PLATE
• Machining-Machining, CNC Description: Manufacture of coupling shafts, flange adapters, grub screws frame strengtheners and driving arms for use in industrial machinery.
• Machining-Machining, CNC Description: Cotter Pin
• Machining-Machining, CNC Description: Manufacture of flanges and end fittings for use in the vacuum industry.
• Machining-Machining, CNC Description: Turning of earth lead connectors used for flocking equipment.
• Machining-Machining, CNC Description: Please quote for the following parts to be machined (incl wash, leak test & tooling): 1/ BK3R 7006 AA – Clutch Trans Case Annual Volume 106,000 2/ AV6R 7F096 GD – Clutch Case Annual Volume 200,000 3/ AV6R 7F097 GD – Transmission Case Annaul Volume 200,000 All three project – SOP 2011.
• Machining-Machining, CNC Description: Machining of components, used in the manufacture of decorative trims.
• Machining-Machining, CNC Description: Looking for companies to do some plastic machining and metal machining of spacers, striker holders & bodies. Please refer to all drawings for component details.
• Machining-Machining, CNC Description: Item: (1) Open Swivel Pivot Bar With Bush (2) Table Column Boss (3) Open Swivel Nylon Bush (4) Open Swivel Column All for chairs
• Machining-Machining, CNC Description: Spider Body NSL-1998-18B & Spider Body NSL-1998-22B
• Machining-Machining, CNC Description: Needle Pin
• Machining-Machining, CNC Description: Machining of service lids.
• Machining-Machining, CNC Description: Swivel Leg Attachment Boss & Castor Insert
• Machining-Machining, CNC Description: Machining of shroud crowns, pump shafts & bush holders used for pumps. Please refer to all word documents and drawings for specifications of all components.
• Machining-Machining, CNC Description: Fixing blocks used for the construction industry.
• Machining-Machining, CNC Description: Milling & turning of balusters & clamps used for the construction industry.
• Machining-Machining, CNC Description: Item: (1) Switch Bracket (Drawing No. 3460500491) (2) Bush (Drawing No. 3460300492) (3) Cap - Zinc End Cap (Threaded) (Drawing No. 3460300493) (4) End Cap ( KA ) - Zinc Die Cast (Drawing No. EXP15528) (5) DA Switch Cam - Code A & D (Drawing No. 3460300494) (6) End Cap ( KA ) - Zinc Die Cast (Drawing No. 346 0510 430) All for heavy vehicles
• Machining-Machining, CNC Description: Urgent requirement. Machining of hollow tube.
• Machining-Machining, CNC Description: Machining of castings used for turbine blades.
• Machining-Machining, CNC Description: Machining of a bush.
• Machining-Machining, CNC Description: Drilling, milling and turning of wing nuts used for construction, compaction equipment.
• Machining-Machining, CNC Description: Seven generic examples provided for reference (inlcuding Top Plate, Plunger & Plunger Block).
• Machining-Machining, CNC Description: Machining of a threaded bar.
• Machining-Machining, CNC Description: Machining of an outlet housing.
• Machining-Machining, CNC Description: Milling, turning and drilling of shaft drives, dead stop rotary arms and pillar brushes used for the manufacture of scanning machines.
• Machining-Machining, CNC Description: Machining of graphic holders Complete to drawing.

Latest Profiles

Kingsnorth Engineering

Kingsnorth engineering is a friendly family run,sub-contracting company,founded in 1986,and is situa...

Gullfield Engineering Ltd

Gullfield Engineering was formed by the Haskins brothers, Reg, Terry & Bill in the early 1980s. I jo...

SC ENGINEERING

ISO 9001:2008 approved, Fine limit, Engineering and Fabrication in a wide variety of materials. From...

Emerald Precision Ltd

Emerald Engineering commenced business in October 1993 as a precision engineering Company dedicated ...

JRE Precision Limited

Precision milling, turning, grinding of components - shafts 1mm to 400mm and complex geometric compo...