Latest RFQs

• Machining-Machining, Conventional Description: Manufacture of various components for use in food processing equipment.
• Machining-Machining, Conventional Description: Laser Measuring Apparatus Items: (1) Heatsink For Laser Diode (2) Diode Locator
• Machining-Machining, Conventional Description: Manufacture of spigots, spacers, spiders, needles, yokes & mounting plates for use in industrial machinery.
• Machining-Machining, Conventional Description: Machining of pilot bores & saddled stones. Used in the manufacture of autosport equipment.
• Machining-Machining, Conventional Description: Machining of Brake & Gear Hangers. Used in the manufacture of Autosport equipment.
• Machining-Machining, Conventional Description: Machining of a Swing Arm. Used in the manufacture of Autosports machinery.
• Machining-Machining, Conventional Description: Machining of free-issue plates and Coil former ends.
• Machining-Machining, Conventional Description: Rotor Shaft, for on-road vehicles.
• Machining-Machining, Conventional Description: Machining of Nozzles, nuts, plates etc. Used in the manufacture of Induction equipment.
• Machining-Machining, Conventional Description: Manufacture of components for use in machinery for the food industry.
• Machining-Machining, Conventional Description: Machining of free issue castings used for clutches and brakes.
• Machining-Machining, Conventional Description: Machining of plug ends, nipples, end plug flanges, end pipes, shafts, couplings and half sockets used for paper printing machinery.
• Machining-Machining, Conventional Description: Machining of top caps and washers used for the rail industry.
• Machining-Machining, Conventional Description: Nine items in all - For pump systems end use Includes: Covers (Bearings), Rings & Sleeves.
• Machining-Machining, Conventional Description: Machining of treadles used for pump and transfer systems. The treadles will need to be extruded as well.
• Machining-Machining, Conventional Description: Milling, turning and drilling of: Clamp housings, Hot Runner Tips & Injection Plunger Housings - used in energy saving solution systems.
• Machining-Machining, Conventional Description: Machining of shafts. Used in general engineering.
• Machining-Machining, Conventional Description: Machining of extra high voltage damper clamps used for wire helix.
• Machining-Machining, Conventional Description: Machining of a seat. Used in the manufacture of Valves.
• Machining-Machining, Conventional Description: Machining and some welding of shafts. Used in the Marine industry. Complete to drawings.
• Machining-Machining, Conventional Description: Machining of seats. Used in the manufacture of dyers and valves.
• Machining-Machining, Conventional Description: Turning, milling and drilling of adjuster spigots, clamp backs, split clamps, holder plates and wire guides. Please refer to drawings for all components.
• Machining-Machining, Conventional Description: Milling, turning and some drilling of adaptor spacers, insulated spacers, adaptor rings for thermoforming machinery.
• Machining-Machining, Conventional Description: Machining of bodies.
• Machining-Machining, Conventional Description: Machining of Plier attachments. Blocks to be machined to size and then attached to the pliers. Used as an in house tool for automotive.
• Machining-Machining, Conventional Description: Machining of Shafts, prop & input. Used in the Marine industry.
• Machining-Machining, Conventional Description: Turning, milling and drilling of flanges. The part that needs quoting on the drawing is the flange.
• Machining-Machining, Conventional Description: Machining of housings, pods, flanges etc. Used in the marine industry.
• Machining-Machining, Conventional Description: Machining of a single seat. Used in the manufacture of pumps.Free issue 10.00" dia UNS Super duplex Stainless steel.
• Machining-Machining, Conventional Description: Very urgently require a company to do some milling, tapping and drilling of top form belt feeders outer brackets. Need to be delivered by Thursday.
• Machining-Machining, Conventional Description: Milling, drilling of side plates, left and right hand used for foiling printing equipment.
• Machining-Machining, Conventional Description: Machining of pins, collars etc. Used in the manufacture of special purpose machines.
• Machining-Machining, Conventional Description: Special Purpose Machinery Parts x 21 Includes: Adjuster Block, Adjuster Clamp, Punch Block & Bearing Retainer.
• Machining-Machining, Conventional Description: AA Ram Gland Assembly
• Machining-Machining, Conventional Description: (1) Flat Washer (2) Square Nut (3) Stud - For a forging hammer
• Machining-Machining, Conventional Description: Milling & drilling of rose enclosures used for air water and oil meters.
• Machining-Machining, Conventional Description: Collars & Spindles For Vacuum Litfing Equipment
• Machining-Machining, Conventional Description: Vertrep Earthing Pole
• Machining-Machining, Conventional Description: Aluminium base plate used for the manufacture of printing machinery.
• Machining-Machining, Conventional Description: For special purpose machines: (1) Location Pins (2) Support Pins (3) Location Pin (4) Pin Washers
• Machining-Machining, Conventional Description: Manufacture of shafts, adapters, spacers & bearing housings.
• Machining-Machining, Conventional Description: Machining of handles, inserts, stems, rings etc, used in the manufacture of autosport accessories.
• Machining-Machining, Conventional Description: (1) A1 Dye Tube & Lids (2) Adchem Reservoir
• Machining-Machining, Conventional Description: Body & Pin - For hydraulic system actuator
• Machining-Machining, Conventional Description: Milling, turning and some grinding of internal tube supports, grid assembly guides & basket caps used for a nuclear application
• Machining-Machining, Conventional Description: Stuffing Box M-Type x 2 variations for use in pump equipment.
• Machining-Machining, Conventional Description: Tape Machinery Parts x 26
• Machining-Machining, Conventional Description: Turning, milling and drilling of chassis axle light tower, mount axle plates & axle bars used for construction & compaction equipment.
• Machining-Machining, Conventional Description: Circular Shank Poppet - For a forging hammer
• Machining-Machining, Conventional Description: Machining or flame cutting of plate profiles. Could also quote for the chamfering.
• Machining-Machining, Conventional Description: Machining of manifold blocks. Used in the manufacture of measuring equipment.
• Machining-Machining, Conventional Description: Machining of bushes, end caps & hub plates. Used in the manufacture of special purpose vehicles.
• Machining-Machining, Conventional Description: Front Loading Lamptube
• Machining-Machining, Conventional Description: Machining of castings.
• Machining-Machining, Conventional Description: Machining and grinding of blades. Used in the manufactutre of Robotics.
• Machining-Machining, Conventional Description: Manufacture of components for use in machinery for the food industry.
• Machining-Machining, Conventional Description: Machining of wheels, sleeves, bushes for food processing equipment.
• Machining-Machining, Conventional Description: Machining of rollers. Forms part of a skimmer
• Machining-Machining, Conventional Description: Milling and drilling of base plates used for the manufacture of printing machinery.
• Machining-Machining, Conventional Description: Machining of dummy vents.
• Machining-Machining, Conventional Description: Machining of plates and rings. Used in the manufacture of industrial machinery.
• Machining-Machining, Conventional Description: Machining of clamp bodies. Used in the medical industry.
• Machining-Machining, Conventional Description: Manufacture of Male & Female chassis for use in the aerospace industry.
• Machining-Machining, Conventional Description: Machining of plates
• Machining-Machining, Conventional Description: Machining of mounting plates and covers.
• Machining-Machining, Conventional Description: Machining and boring of wheel spindles.
• Machining-Machining, Conventional Description: In this instance, require: Drilling, Counterboring & Keywaying - For a rotary table component part
• Machining-Machining, Conventional Description: *Flange Plate & Flange Plate Wolf - For Rotary Tables* & **Motor Encoder Mount
• Machining-Machining, Conventional Description: CM Sputter Jig (comprises of: Base, Back & Sides).
• Machining-Machining, Conventional Description: Manufacture of components for a roll access for use in robotic broadcasting equipment.
• Machining-Machining, Conventional Description: Looking for companies to do turning grinding and some heat treat ment of location pins.
• Machining-Machining, Conventional Description: Manufacture of components to be used in sporting equipment.
• Machining-Machining, Conventional Description: Manufacture of components for use in the automotive industry. Going to Conventional and CNC.
• Machining-Machining, Conventional Description: Machining of tubes for the use of construction
• Machining-Machining, Conventional Description: 7 Off: Vessels for the Nuclear industry Machine capacity required/3 Axis machining capabilities
• Machining-Machining, Conventional Description: Milling, turning and drilling of bucket frames, drive blocks and mounting screws. Please refer to drawings for a list of all components.
• Machining-Machining, Conventional Description: Machining of inserts, plates and bearings.
• Machining-Machining, Conventional Description: Turning, milling and some drilling of slit carriers, carrier rods & grid carriers. Please refer to drawings.
• Machining-Machining, Conventional Description: Manufacture of machined components for use in law enforcement
• Machining-Machining, Conventional Description: Machining of blocks, pillars, pulleys etc. Used in the electronics industry.
• Machining-Machining, Conventional Description: Machining of free-issue castings.
• Machining-Machining, Conventional Description: Model Seal Carrier (Energy Industry end application)
• Machining-Machining, Conventional Description: Turning, milling and drilling of end caps
• Machining-Machining, Conventional Description: Manufactuue of components for use in special purpose machinery.
• Machining-Machining, Conventional Description: Looking for companies to manufacture the tool plate to size and drilled. Suppliers with spark erosion facilities would be beneficial
• Machining-Machining, Conventional Description: Turning, milling and drilling of beam ends used for safety equipment
• Machining-Machining, Conventional Description: Turning, milling and drilling of side clamp bars.
• Machining-Machining, Conventional Description: Inlet Section (Petro-Chem. Industry)
• Machining-Machining, Conventional Description: Stainless Steel Double Threaded Nuts.
• Machining-Machining, Conventional Description: Milling, drilling and tapping of suspension clamp dolly and suspension clamp dolly keeper.
• Machining-Machining, Conventional Description: Location Pins
• Machining-Machining, Conventional Description: Machining of couplings & shafts.
• Machining-Machining, Conventional Description: Machining of shafts and drums. Small amount of fabrication.
• Machining-Machining, Conventional Description: Machining from solid of chain adjusters.
• Machining-Machining, Conventional Description: Machining & welding of levers, brackets, pillars & rods.
• Machining-Machining, Conventional Description: Machining of a strip, disc and housing.
• Machining-Machining, Conventional Description: Turning of vacuum hose connectors and joint mounting plates.
• Machining-Machining, Conventional Description: Turning and some milling of housing tubes & main housings.
• Machining-Machining, Conventional Description: Cutting, slotting and grinding etc of form bars. Used in the manufacture of printing machinery.
• Machining-Machining, Conventional Description: (1) Enclosure - Drivers Information Panel & (2) Front Panel
• Machining-Machining, Conventional Description: URGENT REQUIREMENT 1 set of parts for drill test rig
• Machining-Machining, Conventional Description: Laser Measuring Apparatus Items (x3): (1) Side Bracket Part No.1 (2) Side Bracket Part No.2 (3) Support Arm
• Machining-Machining, Conventional Description: Shafts (x2 variants) - Centrifugal Fans end application
• Machining-Machining, Conventional Description: Manufacture of headstocks & tailstocks for use in industrial machinery.
• Machining-Machining, Conventional Description: Milling and some drilling of guide blanks used for the manufacture of printing machinery.
• Machining-Machining, Conventional Description: Machining of tables. Used in the manufacture of plastic machinery.
• Machining-Machining, Conventional Description: Machining of plant spares and repairs. Usually turning, milling and sometimes wire erosion.
• Machining-Machining, Conventional Description: Machining of rings, stud assemblies and ring blocks.
• Machining-Machining, Conventional Description: RE-Reporting, No response. Originally reported 3/12/09. Order to place ASAP Finish machining of a bucket.
• Machining-Machining, Conventional Description: Machining of T bolts. Used in general engineering.
• Machining-Machining, Conventional Description: Rotary Table Parts (x2): (1) Motor Mounting Plate & (2) Diesel Keyway
• Machining-Machining, Conventional Description: Machining of blocks & bosses. Used in house.
• Machining-Machining, Conventional Description: Machining of markers, clamp pads, brackets, blocks, etc
• Machining-Machining, Conventional Description: Lap Plate (For in-house production machinery)
• Machining-Machining, Conventional Description: Machining of a vessel spacer.
• Machining-Machining, Conventional Description: Turning and some drilling of ram locking devices.
• Machining-Machining, Conventional Description: Turning, milling and some drilling of bushes, hollow shafts and inner shafts.
• Machining-Machining, Conventional Description: Machining of pump heads.
• Machining-Machining, Conventional Description: Special Purpose Machine Parts (x12)
• Machining-Machining, Conventional Description: Machining of feed rails.
• Machining-Machining, Conventional Description: Machining of bases, plates, pillars, sleeves & fixtures.
• Machining-Machining, Conventional Description: Breaker Plate (For in-house extruding machinery)
• Machining-Machining, Conventional Description: Machining of slides, spacers, rods etc.
• Machining-Machining, Conventional Description: 'Main Bearing 1' - Satellite end application
• Machining-Machining, Conventional Description: Manufacture of components for use in a cockpit throttle quadrant
• Machining-Machining, Conventional Description: Manufacture of components for use in a workholding device.
• Machining-Machining, Conventional Description: Machining and brazing of Splicer components.
• Machining-Machining, Conventional Description: Manufacture of locating blocks, angles, brackets and panels for use in trains.
• Machining-Machining, Conventional Description: Machining of spools and cheek plates.
• Machining-Machining, Conventional Description: Machining of assorted components. Used in the manufacture of special purpose machinery.
• Machining-Machining, Conventional Description: Machining of tooling components. Used in the manufacture of special purpose machines.
• Machining-Machining, Conventional Description: Machining of Link arms, spacer plates, mount, cylinder brackets and mounting flanges used for automotive industry. Please refer to all drawings for component details.
• Machining-Machining, Conventional Description: Machining of heat exchanger flange for the use in heating and ventilation
• Machining-Machining, Conventional Description: Turning, milling and drilling of end blocks and centre blocks used for thermoforming machinery.
• Machining-Machining, Conventional Description: Machining of Wedges. Used in the manufacture of scientific equipment.
• Machining-Machining, Conventional Description: Under Web Shoe Hub (Outer) - Agricultural machinery end application
• Machining-Machining, Conventional Description: Machining of bar caps & centre pins.
• Machining-Machining, Conventional Description: Manufacture of components for use in test equipment.
• Machining-Machining, Conventional Description: Machining of breather fittings.
• Machining-Machining, Conventional Description: Turning of inserts which go into vacuum vessels.
• Machining-Machining, Conventional Description: Machining of bolts, used in the manufacture of motorcycle accessories.
• Machining-Machining, Conventional Description: Machining of bosses, spacer, shafts,etc, all used in the manufacture of a gripper.
• Machining-Machining, Conventional Description: Urgent quotation required. Manufacture of handle units, cover plates, wheels and hinges for use in premium suitcases. You will require an IGS reader to be able to quote for this job.
• Machining-Machining, Conventional Description: Machining of back plates. Used in the manufacture of door furmiture.
• Machining-Machining, Conventional Description: Manufacture of shafts and drums for a hand winch used in the entertainments industry. Mainly turning with some drilling.
• Machining-Machining, Conventional Description: 2 Items this project: (1) Slider & (2) Guiding Rail - For powered doors
• Machining-Machining, Conventional Description: Stopper for 2 dimensional variants of Globe Valves
• Machining-Machining, Conventional Description: Machining of a bearing tube.
• Machining-Machining, Conventional Description: Machining /laser cutting of panels. Used in the medical industry. This panel is for a membrane keypad.
• Machining-Machining, Conventional Description: Manufacture of lower coupling plate for use in engine testing equipment.
• Machining-Machining, Conventional Description: Voyager mast strengthening strip for use in industrial machinery.
• Machining-Machining, Conventional Description: Machining of robotic components.
• Machining-Machining, Conventional Description: (1) Gearcase & (2) Eccentric (Both for utilities end use)
• Machining-Machining, Conventional Description: Roller Barrel End 1 & Roller Barrel End 2
• Machining-Machining, Conventional Description: Turning, drilling and some threading of pinch bolt master clamps.
• Machining-Machining, Conventional Description: Machining of stainless steel components.
• Machining-Machining, Conventional Description: Milling and some turning of printed motor plates & rings used for broadcasting film equipment.
• Machining-Machining, Conventional Description: Window Rack (Winder) - for use in hospitals
• Machining-Machining, Conventional Description: Machining of GRP Turning, drilling and some milling of hiway packers and hiway insulating plates.
• Machining-Machining, Conventional Description: Machining of lead screws
• Machining-Machining, Conventional Description: Machining and grinding of tapered components.
• Machining-Machining, Conventional Description: Manufacture of shells and shell caps for use in actuators. Due to quantities and complexity, this is also being sent out to CNC Machining.

Latest Profiles

Kingsnorth Engineering

Kingsnorth engineering is a friendly family run,sub-contracting company,founded in 1986,and is situa...

Barrett Automotive Ltd

A recentlty established company with workforce and management that has significant experience within...

Gullfield Engineering Ltd

Gullfield Engineering was formed by the Haskins brothers, Reg, Terry & Bill in the early 1980s. I jo...

SC ENGINEERING

ISO 9001:2008 approved, Fine limit, Engineering and Fabrication in a wide variety of materials. From...

Emerald Precision Ltd

Emerald Engineering commenced business in October 1993 as a precision engineering Company dedicated ...