Latest RFQs

• Machining-Machining, Plastics Description: Manufacture of rod wipers to go into industrial machinery.
• Machining-Machining, Plastics Description: Machining of plastic tubes.
• Machining-Machining, Plastics Description: Machining of Medical components.
• Machining-Machining, Plastics Description: Machining of guide bushes, centre bushes, & wear bloc-shower inlets used for paper making machinery.
• Machining-Machining, Plastics Description: RE-REPORTING, lack of interest, originally reported 25/06/10. Machining of back plates. Used in production tooling.
• Machining-Machining, Plastics Description: Manufacture of spacers and bushes for use in office furniture.
• Machining-Machining, Plastics Description: Machining of hinge shafts used for electrical test equipment.
• Machining-Machining, Plastics Description: Transducer holders used for air water and oil meters.
• Machining-Machining, Plastics Description: Machining of small applicator handles used for the manufacture of flocking equipment.
• Machining-Machining, Plastics Description: SRBF Worm Wheel Blanks - Turning & Drilling operations only required
• Machining-Machining, Plastics Description: Machining of flush pipe fittings used for hand wash units.
• Machining-Machining, Plastics Description: Machining of a driven gear.
• Machining-Machining, Plastics Description: Various plastic parts ie water distributors for the automotive industry.
• Machining-Machining, Plastics Description: Petro-Chem Industry application: (1) Production RDS Dummy For Test Fit & (2) Production RDS Dummy For Mass Test
• Machining-Machining, Plastics Description: Machining of pin blocks
• Machining-Machining, Plastics Description: Machining of enclosure halves. Used on Audio products.
• Machining-Machining, Plastics Description: Machined plastic components for the vending industry
• Machining-Machining, Plastics Description: Machining of discs.
• Machining-Machining, Plastics Description: Machining of table standards used for foiling printing equipment
• Machining-Machining, Plastics Description: Machining of tube, & lens used for electron microscopes.
• Machining-Machining, Plastics Description: Machining of Fingers & back ups. Used in the manufacture of special purpose machinery.
• Machining-Machining, Plastics Description: Machining of piston rings.
• Machining-Machining, Plastics Description: Machining of discs and lids used for welding turntables.
• Machining-Machining, Plastics Description: Machining of a plastic knob Used in the manufacture of engineering equipment.
• Machining-Machining, Plastics Description: Plastic machining of handles used for the manufacture of flocking equipment.
• Machining-Machining, Plastics Description: Manufacture of a screw for use in the electronics industry.
• Machining-Machining, Plastics Description: Machining of spacers, rollers & guide bars.
• Machining-Machining, Plastics Description: Gas strut pivots, beta bars and slide wheels used in conjunction with consumer product mechanism
• Machining-Machining, Plastics Description: Damping Device (Clutch Pad) - For a ticket dispenser
• Machining-Machining, Plastics Description: Guide Blocks, feed tracks & hopper bases.
• Machining-Machining, Plastics Description: For Motorcycles: (1) Cylinder Head Camshaft Plug Sets (Inlet Plug/Exhaust Plug) & (2) Timing Chain Guide
• Machining-Machining, Plastics Description: Looking for suppliers to make acetal spacers.
• Machining-Machining, Plastics Description: Food Industry application processing machinery parts: (1) Wiper Arm (2) Blade Spacer (x2 dimensional variants) (3) Hold Down Spacer (REF 3 & REF 4 versions only)
• Machining-Machining, Plastics Description: Machining of locating sleeves for the manufacture of construction and compaction equipment.
• Machining-Machining, Plastics Description: Machining of grommets used for electric motors and joysticks.
• Machining-Machining, Plastics Description: Machining of body couplings.Used in the manufacture of process control equipment. Attached is one of several that are outsourced. Quality is very important.
• Machining-Machining, Plastics Description: Machining of insulation blocks used for power rectifiers.
• Machining-Machining, Plastics Description: Machining of pistons used for food equipment.
• Machining-Machining, Plastics Description: Bearings & end caps for Repair kit for automotive components
• Machining-Machining, Plastics Description: Machining from solid of a cap gripper
• Machining-Machining, Plastics Description: Cover Plate (Chemical/Pharmaceutical Process Plant end application)
• Machining-Machining, Plastics Description: Machining of bayonets. Suppliers to machine the J slot only.
• Machining-Machining, Plastics Description: Manufacture of spacers for use in laboratory equipment.
• Machining-Machining, Plastics Description: Machining of button housings used for electronic components.
• Machining-Machining, Plastics Description: Machining of assembly jigs
• Machining-Machining, Plastics Description: Machining of holes in acetal spacers.
• Machining-Machining, Plastics Description: Shuttle Bush
• Machining-Machining, Plastics Description: Machining of Nylon rollers.
• Machining-Machining, Plastics Description: Machining of automotive components.
• Machining-Machining, Plastics Description: Machining of stack candles.
• Machining-Machining, Plastics Description: Machining of Holders & Caps.
• Machining-Machining, Plastics Description: Manufacture of a bobbin for use in wire magnetic coil for a lamp.
• Machining-Machining, Plastics Description: Manufacture of peg stays, holders and mounts for use in the marine industry.
• Machining-Machining, Plastics Description: Machining of clear tube for use in display lighting equipment for an exhibition.
• Machining-Machining, Plastics Description: Manufacture of a cassette from free issue material.
• Machining-Machining, Plastics Description: Machining of sheet perspex.
• Machining-Machining, Plastics Description: Manufacture of round bars for use onboard aircraft.
• Machining-Machining, Plastics Description: Parts for a refubishment Programme
• Machining-Machining, Plastics Description: Insert - For use with chemical/food/pharmaceutical processing plant item flanges Seems likely that the pieces in question will have to be tungsten carbide/diamond-bladed saw cut
• Machining-Machining, Plastics Description: Machining of nylon spacers.

Latest Profiles

Kingsnorth Engineering

Kingsnorth engineering is a friendly family run,sub-contracting company,founded in 1986,and is situa...

Gullfield Engineering Ltd

Gullfield Engineering was formed by the Haskins brothers, Reg, Terry & Bill in the early 1980s. I jo...

SC ENGINEERING

ISO 9001:2008 approved, Fine limit, Engineering and Fabrication in a wide variety of materials. From...

Emerald Precision Ltd

Emerald Engineering commenced business in October 1993 as a precision engineering Company dedicated ...

JRE Precision Limited

Precision milling, turning, grinding of components - shafts 1mm to 400mm and complex geometric compo...