Membership

To find out more about the RFQs on the right and how to get access to the full details, please click on the relevant RFQ and register your interest on the form below it.

For membership advice please contact Sales on:

+44 (0)1256 394500
sales@qimtek.co.uk

Back to top

Latest engineering RFQs

  • Fabrication-Laser Cutting Description: Manufacture of side panels for use in the electronics industry.
  • Plastic & Rubber-Injection Moulding Description: Manufacture of Mouth Piece holder.
  • Fabrication-Laser Cutting Description: Supplier wanted - to laser cut, creating mitres (support frame column points) - construction industry end application NB No other parts of these items require laser cutting
  • Fabrication-Water Cutting Description: Profiling of material for pressure vessel.
  • Machining-Machining, Conventional Description: Turning and milling of cupper cylinders used for spacing equipment.
  • Machining-Machining, Conventional Description: Machining of free issue casting for a 6 ton press stand frame.
  • Fabrication-Laser Cutting Description: High V Guard Mesh - for use in car parks & schools, etc. - Safety application
  • Machining-Machining, Conventional Description: Milling, turning, drilling and some tapping of cylinder rings, pump drive shafts, air pump pedestals and air pump drive end caps. For a full list of components please refer to drawings.
  • Fabrication-General Fabrication Description: Supplier sought to shear agricultural industry end application pieces x 8 (further details held on file by the above-named client)
  • Machining-Machining, CNC Description: Manufacture of injector rivets, cups, layshafts, levers, fittings and sensor drives for use in the automotive industry.
  • Machining-Special Purpose Machines Description: The above-named client is seeking a single-source supplier - offering a turnkey solution (design/development/manufacture/installation/ commissioning) - An in-house (fully programmable), process automation system. Should at least incorporate single speed (linear configuration) conveyor and robotic pick & place elements
  • Machining-Machining, CNC Description: The manufacture of anvils for use in riveting.
  • Machining-Machining, Plastics Description: The manufacture of components for a special purpose machine.
  • Machining-Machining, CNC Description: The manufacture of components for a special purpose machine. This will involve some milling and turning.
  • Fabrication-Wire Forming Description: Manufacture of wire cylinder supports used to hold plastic cylinders fitted in Emergency Service vehicles.
  • Casting-Extrusion Description: Manufacture of a 'guardian barrier'; an expanding criss cross barrier used in forecourts, supermarkets and sheds.
  • Machining-Machining, Conventional Description: Supplier to: Turn/Mill/Drill/Tap - Creating Overlap Welding Tips (Part 1) & (Part 2) - For welding irons
  • Machining-Machining, Plastics Description: Plastic machining of base bottoms, plungers, valves, screw bases & pump barrels used for the construction industry.
  • Fabrication-General Fabrication Description: Manufacture of Rear brace, Sensor ring, Gearbox mounting plate, Endstop- front, Rear positioning bracket, Front positioning bracket, Rail mounting foot, Adjuster support plate, Upper shield support angle for use in the automotive industry.
  • Machining-Machining, Conventional Description: Manufacture of Insulator holder, Drive arm, Drive pin short, Side guard mountain button, Roller, End guard mountain button, Drive shaft, Gearbox adapter, Cam follower shaft, Gearbox shaft, Screw jack coupling, Cam follower spacer, Collar, Transit block, Y-Axis carriage rear stiffener, Y-Axis stiffener, Setting Gauge, Y-Axis carriage stiffener, Lifting frame pivot, Z-Axis drive shaft for use in the automotive industry.
  • Machining-Grinding Description: Cylindrical grinding of Free Issue parts used in food component manufacturing.
  • Fabrication-Prototyping Description: Seeking a supplier that will contribute towards design/development aspects and then full-scale manufacture: "U" shaped retaining (slide) clips - for microscopes
  • Plastic & Rubber-Injection Moulding Description: Injection moulding of base tops, contact lens recess, lids, & reservoirs used for the construction industry. For a full list of components, please refer to drawings.
  • Fabrication-General Fabrication Description: Supplier to shear - creating blanks for construction industry application fixings
  • Machining-Machining, Conventional Description: Turning, drilling and tapping of ram adaptor plates, cylinder mounting plates & frames used for hydraulic presses.
  • Machining-Turning CNC Description: Manufacture of an insert ring for use in a bearing housing.
  • Plastic & Rubber-Vacuum Forming Description: Nose cone cover for wind turbine generator
  • Machining-Machining, Conventional Description: URGENT enquiry. Manufacture of screws with square heads used in the Engineering Industry.
  • Fabrication-Complete Manufacturing Description: Complete manufacture of agricultural sweeper body required
  • Design & Development-Rapid Prototyping Description: Looking for companies to produce rapid prototypes of suspension components used for heavy vehicles. The method of manufacturing would be investment casting or sand casting, therefore being sent to investment and sand casting suppliers.

Back to top

Back to top