Overview
We don't currently have a description for the process 'Light Fabrication (under a tonne)'. If you'd like to contribute one, please get in touch.
Process: Light Fabrication (under a tonne)
Post project to suppliers with Light Fabrication (under a tonne) capabilities
Light Fabrication (under a tonne) projects for quote
-
Drawings count: 1
Fabrication-Light Fabrication (under a tonne)
This buyer, who specialises in the manufacture of security gates, urgently seeks quotes for the attached fully fabricated socket caps. The ideal supplier will be able to produce these parts economically, offer a crucial delivery within 10 days of order placement and also provide a high-quality end product. Once a relationship has been cultivated, further projects could be made available in addition to this one-off requirement. There is an immediate order to place with a supplier who can fulfil the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 2
Fabrication-Light Fabrication (under a tonne)
This buyer, a company involved in research, auditing and quality assurance, is currently seeking quotes for the manufacture of the attached stainless steel parts. This is an urgent, cost-sensitive project with an immediate order to place, as well as the possibility of additional work to follow. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 1
Fabrication-Light Fabrication (under a tonne)
This buyer is seeking quotes and best lead times for the attached frames and associated parts. The required material is mild steel, with the parts to be supplied machined and fully welded, but not powder coated. This is due to the fact that the client wishes to see if there are any design alterations that may be required. There is an immediate order to place for the work in question and as the buyer requires these parts fairly urgently, suppliers who can offer a fast turnaround may be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 4
Fabrication-Light Fabrication (under a tonne)
This buyer from the medical care industry is urgently looking for suppliers to quote best price and lead times for the attached components. The ideal supplier will be able to provide quotes by 7th April 2021 and delivery by 12th April 2021. Quotes are sought for 20 off of each design in powder coated mild steel and 20 off of each design in stainless steel. Please make contact with the buyer at your earliest opportunity to be considered for this enquiry. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 1
Fabrication-Light Fabrication (under a tonne)
The attached bucket/trough design is required on a monthly basis, on behalf of a company that specialises in precision machining services. They are looking to work with a supplier who can produce 54 off of these assemblies per month on their behalf. The client has advised that the material can be free-issued if necessary and suppliers are asked to advise accordingly within their quotation. This is a great opportunity to supplement your long-term workload and win a new repeat customer. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 1
Fabrication-Light Fabrication (under a tonne)
A fabrication supplier is sought to produce 50 off of the attached internal fan design, with delivery required by July 2021. The client - a company that operates within the electronics sector - does not currently have a supplier in place for this project and therefore, they are keen to speak with Qimtek members who can assist. Suppliers who are interested in being considered for this enquiry are asked to make contact with the buyer via email or telephone to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 3
Fabrication-Light Fabrication (under a tonne)
Suppliers with the capabilities to produce the attached panels are sought, on behalf of a company that operates within the construction industry and spends £250,000 on subcontract fabrication services annually. They seek quotes for two different sizes of panel to be manufactured in accordance with their specifications, in batches of 4 and 14 off respectively. Suppliers who are interested in being considered for this enquiry are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 1
Fabrication-Light Fabrication (under a tonne)
The attached cart fabrication will be used to support heavy sheets of material weighing up to 400kg. This is to be made from aluminium in accordance with the drawing attached. The buyer behind this enquiry has an immediate order to place for 1 off of this design, with scope for further units to be ordered at a later date. Delivery of the initial order is required by 28th May; suppliers with the capacity to assist are asked to make contact with the buyer directly to discuss.
-
Drawings count: 1
Fabrication-Light Fabrication (under a tonne)
Suppliers with bar bending capabilities are asked to provide a quotation for the attached handle design, which is to be made from 10mm black round bar. The buyer has advised that this is one of three sizes they will potentially require and that the design in question will be ordered on a repeat basis. Interested suppliers are asked to make contact with the buyer directly to discuss the requirement, for which there is an immediate order to place. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 2
Fabrication-Light Fabrication (under a tonne)
This company operates within the construction industry and seeks a new supplier to produce the attached designs. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately for the specified batches of this design, with ongoing work available for the chosen supplier. Therefore, this enquiry will be an ideal match with those who are looking to fill long-term fabrication capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
Companies listed in this category
-
ISO approved Large Machining & Heavy Fabrication, based in Kingswinford.
TM Specialist Engineers are very proud to present our expertise in the field of Sub-Contract Large Part Precision Machining and Heavy Steel Fabrications.
Since our formation in 1948 it has become our single focus on our customers’ engineering needs. As one of the front runners in providing engineering solutions, TM Specialist Engineers has excelled in its field of Sub-Contract Large Part Precision Machining and Heavy Steel Fabrications. -
At Midland Power Press Services (MPPS), we specialise in providing our customers with the specialist installation, maintenance and repair of mechanical power presses and hydraulic presses, ranging from 5 tonne to 4000 tonnes plus ancillary equipment.
Established in 1980, we have grown into one of the UK s most respected companies by helping to save our clients valuable production time and hundreds of thousands of pounds through a bespoke solution to their problems.
-
Keyford offer the very best in mechanical, electrical and electronic engineering, giving a complete package to our customers from single component manufacture through to complete assembly builds and project management.
Manufacturing from customer supplied drawings, Keyford can support customer design teams overcome technical problems and improve upon existing designs.
-
HENLEY ENGINEERS
SUPPLIERS OF FABRICATIONS, SHEET METAL WORK AND MACHINIED COMPONENTS FOR OVER 75 YEARS
Henley Engineers is a well-established fabrication and precision machining company. Our skilled team work with a range of materials including mild steel, stainless steel and aluminium. Add to this their expertise in laser cutting, welding, CNC machining, manual machining, etc.
-
Statfold engineering is a family run business and are devoted to providing our customers with reliable quality products. Having passed ISO9001:2015, and RISQS we can proudly say that the quality of our products and parts are consistent from the moment you contact us to moment you receive the finished product.
STATFOLD ENGINEERING LTD specialise in all types of machining, manufacturing of railway vehicle components, with a fully equipped machining and fabrication workshop for all your machining and manufacturing needs.
Services include
Rail wheel reprofiling
-
HSF Group are an engineering company based in the manufacturing heartland of Northern Ireland.
Fully integrated production company with in-house services and machinery to facilitate all design and manufacturing needs. Sub-contract supplier to established firms for over 15 years. -
Chirton Engineering are part of the Carrs Group PLC with a £404 million pound turnover, listed on the FTSE, and have 1004 employees,This gives Chirton financial security, and our clients the confidence on which they can place long term orders.
Chirton Engineering are based in North Shields and we are a Sub-Contract Precision Machine shop who work in the Oil and Gas, Medical, Nuclear, Defence, Renewable, and Automotive Sectors.
We have 97% on time deliveries which gives our clients the confidence in being able to build and hit their project completion dates.
-
Engineering and Fabrication Company in Warrington, Cheshire.
At Blease Engineering we specialise in the manufacture of high quality precision machined components, sub-assemblies and fabrications for a diverse range of industries from our Warrington based facility. We have expertise throughout the company which allows us to carry out a wide range of engineering projects to an exceptional standard.
We pride ourselves on customer-orientated service which focuses on:
-
Complete Turnkey With Machining & Fabrication, Hereford
Development and manufacture of metal products with over 30 years supplying a wide range of quality customers such as JCB, Galliford Try and Fairline Boats in the architectural, environmental, industrial and marine sectors.
-
Sheet Metal Fabricators & Pressing speciliasts, based in Milton Keynes.
Milton Keynes Pressings (MKP) was established as a family business in 1985, and after 30 years of growth now employs over 150 staff and services a wide variety of sectors. The Company’s progress has been built on supplying excellent customer service and solving engineering and manufacturing solutions, whilst remaining competitive in a global market place.