Process: Turning, Low Volume
Post project to suppliers with Turning, Low Volume capabilities
Turning, Low Volume projects for quote
-
Drawings count: 2
Machining-Turning, Low Volume
Simple EN8 parts are to be turned for a manufacturer of consumer products with an immediate order to place. Prompt responses from interested suppliers are sought and it is crucial that vendors are able to offer delivery of no longer than 2 weeks. As well as having an immediate order to place, the buyer has advised that similar components will be required in the near future, giving longevity to this project and a chance to fill ongoing capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 3
Machining-Turning, Low Volume
The attached mast bases are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. Please be aware that delivery is required within three weeks of order placement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 2
Machining-Turning, Low Volume
This company operates within the marine sector and is currently seeking a supplier who can urgently manufacture the attached aluminium shaft. Quotes are required for x2 off, with delivery sought by 14th April; therefore, please only submit a quotation for this project if you are in a position to fulfil the requirement within the specified time frame. In addition, this could result in further opportunities once quality, speed of delivery and reliability have been proven, as the client has further projects in the pipeline for 2021. **Due to the current health climate, We ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 3
Machining-Turning, Low Volume
This client currently seeks a supplier to assist in the manufacture of the attached turned component. This to be made from aluminium bar and requires turning, threading and anodising for completion. There is an immediate order to place for this enquiry, for which the client requires a batch of 10 off. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 1
Machining-Turning, Low Volume
This project is for a private individual who requires the assistance of a supplier who can produce the attached chuck adaptor plate. There is an immediate order to place for this component, which will be used as a replacement part within a modeller's lathe. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 4
Machining-Turning, Low Volume
Specialising in the manufacture of seals and gaskets, this buyer is in need of a supplier to fulfil an ongoing requirement for the attached silver-plated O-rings. With an immediate order to place for the attached parts, the buyer seeks production of a range of sizes and has indicated that this is an ongoing requirement that is usually repeated every few months. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 1
Machining-Turning, Low Volume
This company specialises in the manufacture of agricultural machinery and is currently seeking best price and delivery for the attached MS 6-tooth wheel. Those that are interested in being considered for this job are asked to make contact with the buyer directly via email or telephone. This could result in further opportunities once quality and reliability have been proven. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 1
Machining-Turning, Low Volume
This buyer requires quotes for a turned component, which will be used within an autosports application. They would like to receive quotes for this part to be made from stainless steel in batches of 2 off . The buyer is especially keen to speak to suppliers who can offer a fast turnaround on the production of this design, which will be ordered on a repeat basis throughout the year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 3
Machining-Turning, Low Volume
This Qimtek buyer is looking for a new supplier to turn stainless steel roller shafts - ideally, these parts are to be made using 316 stainless steel, but the buyer will accept 304 stainless steel as an alternative, the sleeve is to be made from mild steel Pricing and quality of the end products is of the utmost importance for this enquiry. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
-
Drawings count: 1
Machining-Turning, Low Volume
Suppliers with turning capacity are sought, in order to produce an aluminium spigot. The client is looking to partner with a Qimtek member who can offer delivery of 30 off by 15th March; therefore, interested suppliers are asked to make contact with the buyer via email or telephone at their earliest opportunity to be considered. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**
Companies listed in this category
-
Established in 1986, we are a successful family run precision engineering company with over 34 years of experience in many areas of precision engineering. We are based in the heart of the Midlands, specialising in the production of precision components for the automotive, valve, bottling, packaging and aerospace industries.
-
Established in 1966, F C Newell & Son Ltd is proud of its reputation for machining high precision turned components for the Aerospace and Defence, Dynamics, Hydraulics and Medical sectors, regularly achieving tight limits as low as 5 microns. We have an excellent customer service record and aim to please everybody from point of contact through the working life of all parts supplied.
-
ISO 9001 Plastic Engineering Specialists, West Midlands
Holbourne Industrial Plastics is one of the UK s leading suppliers of engineering plastics, electrical insulation and flexible gasket sealing products. Serving local and multinational organisations in the rail, defence and aviation sectors, our high quality and cost effective solutions in plastic are tailored to the meet the specific needs of our customers.
-
Pinnacle Precision Engineering is based in Washington, within the heart of the North East. All of our engineers are from the sub-contact precision machining sector and are highly skilled to allow us to confidently tackle complex and demanding requirements,
We specialise in low to medium volume CNC Turning and Milling, producing complex and tight tolerance precision machined components from a variety of materials.
-
CNC Machining, Fabrication & Engineering, Hull
Clifford Engineering provides cost effective high volume, medium and small batch size manufacturing components to industrial partners in a broad range of industry sectors including fabrication, signage, audio, printing industries, security, automotive, electronics, caravan, food and pharmaceutical production.
-
Fully equipped machine shop and fabrication shop. Can handle large items to small items
-
William cope is a family owned business that has been trading for over 60 years. We have been ISO 9001 registered for over 15 years and provide our customers with top quality finished machined parts and services.
-
AS, ISO & BAE approved CNC Machinists, based in Poole.
KW has built on it's reputation of quality workmanship to maintain a profitable businessThe company was founded by its Managing Director Mr Keith Ward in 1983. We have since expanded to an employer of 42 personnel and occupy premises on the Nuffield Estate Poole with in excess of 15,000 sq ft.
-
Plastic Machining based in Llandow, Bridgend.
-
Steel Stockholders & Sub-contract machinists, based in Shefield, South Yorkshire.
Over the years Taylor Forgings has been involved in many high profile projects. Steel machined by Taylor Forgings was used in the first MRI scanners, the company played a major role in India with supply of specialist steel for the railway signals, each UK submarine has considerable quantities of Taylor Forgings’ material in its turbines and every UK nuclear facility contains Taylor Forgings’ stainless.