Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

337 Projects

Displaying 1 - 20 of 337

  1. Drawings count: 1

    Machining-Machining, Plastics

    This manufacturer of automotive and industrial parts is currently looking to increase their supply base and therefore, they are keen to hear from those who can assist with the machining of the attached Nylon bush. Currently spending approximately £20,000 a year on outsourced machining, the client is expecting that this order will be repeated going forward. Therefore, this is an ideal opportunity for suppliers looking to fill both immediate and long-term capacity.

  2. Drawings count: 2

    Casting-Sand Casting

    This design house has an annual casting spend of approximately £100,000 and is currently looking for possible suppliers who can urgently sand cast the attached aluminium low slung parts, to be used in a small rail system. There is an immediate order to place for the parts in question, which is to be repeated shortly after the initial order at a similar quantity and then again later this year at a much larger volume, making this a great opportunity for suppliers looking to fill immediate and short-term capacity.

  3. Drawings count: 4

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This Qimtek member is looking for a supplier to make the attached plates from mild steel, with quotes required for 200 off of each. The successful supplier can expect to receive repeat orders of the same quantity on a quarterly basis. Quality and good value are both the most important considerations within this enquiry and once a relationship has been established, further projects could be made available in addition to this ongoing requirement.

  4. Drawings count: 7

    Plastic & Rubber-Injection Moulding

    This company has a requirement for the attached caps and flanges, as well as similar components, which will be used within the automotive industry. Quotes are required for 180,000 off per year in regular monthly call-offs, for a minimum of 4 years. Extra drawings for these particular parts, as well as similar parts, have been requested from the designer and will be made available as soon as possible.

  5. Drawings count: 4

    Fabrication-Light Fabrication (under a tonne)

    Working within the automotive industry, this company seeks a supplier to make large annual quantities of the attached fins and brackets, to be ordered in monthly call offs. Quotes are required for 180,000 off per year, for a minimum of 4 years. Extra drawings for these particular parts, as well as additional, similar parts have been requested from the designer and will be made available as soon as possible.

  6. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    Destined for end use within the automotive industry, these locking pins are to be made from mild steel, on behalf of a company that spends over £45,000 per year on bespoke fabricated designs. Quotes are required for annual volumes of between 4000 off and 16,000 off depending on the size of pin. Due to the large quantities involved, the client has advised that a KAN-BAN solution would be advantageous, but not essential. Please advise within your quotation. The client is ideally looking to place a blanket order and call off quantities when required, but is happy to discuss alternatives. This enquiry is a fantastic opportunity to fill long-term capacity with a new client.

  7. Drawings count: 3

    Fabrication-Fabrication with Machining

    This manufacturer of friction components, who outsources approximately £55,000 worth of machined parts a year, has recently designed a new range of brake discs. However, they are struggling to find a supplier who can manage both the profiling and the machining required, as one of the discs incorporates a step. There is an immediate order to place for a sample set, which will be repeated going forward with an annual expectancy of 300-700 sets.

  8. Drawings count: 2

    Profiling-Laser Cutting

    This new Qimtek buyer is looking for a supplier to make the attached gear lever and brake lever for a project they are currently working on, using 6mm thick mild steel. Quotes are required for 1 off of each design. This is a one-off order, but it may lead to similar work in the form of occasional ad-hoc requirements.

  9. Drawings count: 1

    Machining-Turning, High Volume

    Currently outsourcing approximately £500,000 worth of machining a year, this manufacturer of automotive parts and accessories is in need of quotations from prospective new suppliers for the attached turned blanks. The previous supplier of this part is retiring and subsequently, a new supplier is sought to fulfil an immediate order. This will be repeated going forward, with monthly deliveries required.

  10. Drawings count: 1

    Machining-Turning, Low Volume

    This client, a company who spends in excess of £50,000 a year on outsourced machining, urgently seeks a supplier to produce the attached carbon steel components. This project includes aspects of turning, milling and drilling, with the material being supplied free-issue by the client. There is an immediate order to place for this enquiry with similar work to be made available to the successful candidate going forward.

  11. Drawings count: 3

    Machining-Turning, High Volume

    With an impressive outsource spend of over £300,000 on bespoke machining work, this company is looking for a supplier to machine these copper nut unions and screw double nipples, which will be used within the automotive industry. Quotes are required for between 700 and 1400 off annually, with monthly pro-rata amounts also to be quoted. An initial sample of 30 off will also be required and delivered by the end of July. Pricing and quality are both of critical importance and once a relationship is established, further work could be sent directly, making this an excellent opportunity to fill long-term capacity.

  12. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This company is looking for a new supplier to manufacture the attached gantry assemblies and has asked for quotes of 50 off full assemblies, as part of regular call-offs. These gantries are currently sourced from Poland, but the buyer would prefer to return manufacture to the UK; however, pricing is critical. The client has advised that a KAN-BAN solution would be advantageous but not essential, with 50 in stock and ready to order for immediate delivery at all times. Please advise within your quotation if you are able to supply on a KAN-BAN basis. The chosen supplier can expect an ongoing contract going into the end of 2020, with batches ordered of a minimum of 50 off every 6 to 8 weeks. This is a fantastic opportunity for those looking to fill long-term capacity with high volume work.

  13. Drawings count: 2

    Machining-Turning, Medium Volume

    This new start-up, a company who produces hand tools for off-road vehicles, seeks a supplier to produce the attached turned aluminium shafts. These items require turning, drilling and knurling, with an immediate order for 50 off ready to be placed. This will become an ongoing requirement, making it an excellent opportunity for the successful supplier to fill both imminent and long-term capacity moving forward.

  14. Drawings count: 3

    Fabrication-Light Fabrication (under a tonne)

    With an annual spend of over £200,000 on varied fabrication work, this company is looking for a new supplier to fabricate the attached corner socket for use within the automotive industry. Quotes have been requested for 200 off, which will be ordered on an estimated quarterly basis. Owing to the large quantities involved, the client has advised that a KAN-BAN solution would be advantageous, but not essential - please advise within your quotation. Pricing, delivery and quality of the end product are all vitally important considerations for this ongoing enquiry and once a relationship has been established, there will also be an opportunity for the chosen supplier to win further, similar work in addition to this initial request.

  15. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This company, who specialises in the manufacture of automotive products, currently seeks a supplier to produce the two attached wheel studs. These items require milling, turning, threading and chamfering from EN10023. Interested companies are asked to make contact at their earliest convenience, as the buyer has an immediate order to place for this work. There is potential for this to become an ongoing requirement, making it an opportunity to fill both short and long-term capacity.

  16. Drawings count: 3

    Fabrication-Light Fabrication (under a tonne)

    This client is looking for the manufacture of offside and nearside gantry stirrup steps, to be used within the automotive industry. This project incorporates elements of laser cutting, folding, welding and drilling, with quotes required for 50 off nearside and 50 off offside, which will be ordered in regular call-offs. The ideal supplier will be able to offer reliable delivery and provide a high-quality end product economically - once a relationship has been established, further projects could be made available in addition to this initial requirement.

  17. Drawings count: 2

    Fabrication-Tube Bending & Manipulation

    This company spends over £200,000 on assorted fabrication work each year and has an immediate order to place for 46 off each offside and nearside worklight protectors, as per the attached drawings. Please note only the O/S drawing has been made available, however the N/S version is a direct mirror image. Not only is this company looking for this work to be completed, but they are also looking for a long-standing relationship with the chosen supplier. This particular enquiry is a one-off requirement but there will also be repeatable, similar work going forward, to keep up with demand from their own clients. A high-quality finish is sought and pricing is also very important.

  18. Drawings count: 3

    Machining-CNC Machining, High Volume

    Outsourcing machining work to the tune of an impressive £300,000 a year, the company specialises in precision pipework. They are currently looking to work with a machining supplier who can produce the attached set of flanges on their behalf, with large quantities required on an annual basis, delivered in smaller batches on a weekly or monthly basis. The client will look favourably upon quotes from vendors with the specified accreditations, although please be aware that these are not essential. The parts in question will be utilised by a luxury car manufacturer, with eight different designs required in total.

  19. Drawings count: 1

    Machining-Turning, Medium Volume

    This manufacturer of safety products for the automotive sector urgently seeks a supplier to produce the attached mild steel bungs. This project calls for turning, drilling and chamfering, as per the drawings attached. Interested companies are asked to make contact at their earliest convenience, as the buyer has an immediate order to place for this work. There is potential for this to become an ongoing requirement, making it an opportunity to fill both short and long-term capacity.

  20. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This client, who specialise in the manufacture of automotive products, urgently seeks a supplier to produce the attached mild steel components. Interested companies are asked to make contact at their earliest convenience, as the buyer has an immediate order to place for this work. There is potential for this to become an ongoing requirement, making it an opportunity to fill both short and long-term capacity.

Pages