Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

175 Projects

Displaying 1 - 20 of 175

  1. Drawings count: 2

    Machining-Turning, Low Volume

    Simple EN8 parts are to be turned for a manufacturer of consumer products with an immediate order to place. Prompt responses from interested suppliers are sought and it is crucial that vendors are able to offer delivery of no longer than 2 weeks. As well as having an immediate order to place, the buyer has advised that similar components will be required in the near future, giving longevity to this project and a chance to fill ongoing capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 1

    Machining-Turning, High Volume

    The attached piston rods are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 1

    Profiling-Laser Cutting

    Spending over £50,000 a year on bespoke fabricated parts, this company is a manufacturer and distributor of electronic parts. They currently require a fast turnaround on the attached plate mounting, with 5000 off needed as soon as possible. In addition, this could lead to further work for the chosen supplier once a relationship has been cultivated. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 3

    Machining-Turning, Low Volume

    The attached mast bases are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. Please be aware that delivery is required within three weeks of order placement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 2

    Machining-Turning, High Volume

    The attached end caps and clamp fittings are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    Quotes for the manufacture of aluminium base plates and masts are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 1

    Machining-Turning, High Volume

    The attached studs are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached upper body mounts are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    A fabrication supplier is sought to produce 50 off of the attached internal fan design, with delivery required by July 2021. The client - a company that operates within the electronics sector - does not currently have a supplier in place for this project and therefore, they are keen to speak with Qimtek members who can assist. Suppliers who are interested in being considered for this enquiry are asked to make contact with the buyer via email or telephone to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  10. Drawings count: 1

    Machining-CNC Machining, High Volume

    This design company is looking to partner with a machining supplier who can produce the attached package of components. This enquiry incorporates a large number of parts and encompasses a range of different materials including brass, stainless steel, copper, plastic and alloy steel. Initially, the client is looking to receive quotes for 20 and 330 off sets of parts for testing purposes; however, once full production is underway, these parts will be required to the tune of tens of thousands off per year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  11. Drawings count: 3

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This manufacturer of X-ray machinery is in urgent need of a supplier who can assist with the immediate and ongoing production of the attached stainless steel support strut. There is an immediate order to place for 6 units, with delivery sought by the end of the first week of April, or sooner if possible. This is to be repeated moving forward in similar quantities, although the order frequency may vary. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 3

    Sheet Metal Forming-Enclosures

    This company operates within the lighting industry and is currently seeking quotes for the attached electrical enclosures. The material to be used is mild steel ranging from 1.5mm to 3mm thick and the buyer has an immediate order to place for the work in question. Interested suppliers are asked to make contact with the buyer at their earliest convenience to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 4

    Machining-Turning, High Volume

    This buyer has an urgent order to place for the production of the attached peg rod and peg locator. They seek quotes for 150 and 900 off of these designs respectively, with delivery ideally required by 18th March. Suppliers who have the capacity to assist with this enquiry are therefore asked to make contact with the buyer at their earliest convenience to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  14. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    Suppliers with bar bending capabilities are asked to provide a quotation for the attached handle design, which is to be made from 10mm black round bar. The buyer has advised that this is one of three sizes they will potentially require and that the design in question will be ordered on a repeat basis. Interested suppliers are asked to make contact with the buyer directly to discuss the requirement, for which there is an immediate order to place. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 0

    Machining-Machining, Prototyping

    Machining of aluminium safety plates is needed, by a company that outsources in excess of £500,000 worth of machining work each year. The client is keen to speak with suppliers who can offer reliable delivery of 4/6 weeks, as well as fulfilling repeat orders of this component moving forward. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. Although there are no drawings as of yet and no immediate order to place, the buyer is very keen to talk to suppliers about future orders. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 3

    Machining-Milling, Low Volume

    This Qimtek buyer is looking for a supplier to produce a one-off prototype of the attached GPU housing. The part is to be made from brass and supplied with an antique-style finish. As the requirement is for a one-off prototype, the buyer is happy to discuss the housing as it could be subject to changes. Pricing and quality of the end product is of the utmost importance for this enquiry. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  17. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This new buyer to Qimtek is looking for quotes on the attached 303 stainless steel Pins. The buyer has an order to place for this enquiry and has advised that this could lead to additional work for the successful supplier in future. Suppliers with the capacity to assist are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  18. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    Quotes are requested for the manufacture of the copper pipe detailed in the attached drawing, on behalf of a manufacturer of power rectifiers. Interested suppliers are asked to provide their best price and lead time when quoting this enquiry, which has the potential to become ongoing work for the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  19. Drawings count: 4

    Machining-Machining, Plastics

    This manufacturer of security products is currently seeking a supplier with immediate capacity who can produce the attached clamp top and bottom from acetal. They have an urgent order to place for the work in question, with delivery ideally required by 10th March 2021. Suppliers who are able to assist are asked to make contact with the buyer via email or telephone at their earliest convenience; moving forward, this will be ongoing work, to be repeated four times per annum. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  20. Drawings count: 3

    Full turnkey-Fabrication with Machining

    This metal spinning company, who themselves outsource approximately £330,000 worth of fabrication and machining each year, is looking for a supplier who can undertake the manufacture of the attached components. These are destined to be part of an assembly which will be completed in-house. There is an immediate order to place for this enquiry with delivery sought by March 18th. Although it is a one-off requirement, the chosen supplier may be asked to manufacture additional components moving forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

Pages