Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

1060 Projects

Displaying 1 - 20 of 1060

  1. Drawings count: 1

    Machining-Turning, Low Volume

    This client, who operates within the electronics industry, seeks a supplier to manufacture the attached peg. These are to be machined from C110 copper and production involves both turning and drilling processes. There is an immediate order to place with the chosen supplier, which could lead to additional work once a relationship is established.

  2. Drawings count: 1

    Machining-Milling, Low Volume

    These carbon steel lifting bars and delrin pads will form a lifting fixture and are required by a company that spends over £250,000 per year on bespoke machined designs. Quotes are required for 3 off and 6 off quantities and the client has also advised that although this will most likely be a one-off requirement, similar work will also be required later, making it an ideal opportunity to fill long-term capacity moving forward.

  3. Drawings count: 2

    Machining-Gear Cutting

    This construction manufacturing company, who outsource around £100,000 worth of engineering work each year, requires the assistance of a UK supplier who can manage in-house gear cutting with two helical start slots. The attached gear is one of five in the range of similar sizes, and the buyer is hoping to move production of the remaining gears to the chosen supplier as well, making this a great opportunity for suppliers looking to increase their customer base and fill long-term capacity.

  4. Drawings count: 2

    Machining-Machining, Plastics

    This manufacturer of food packaging equipment has an urgent requirement for production of the attached Delrin Monoblocks - Suppliers with immediate capacity are asked to make contact at their earliest convenience to be considered for this opportunity, with delivery required by the 19th December. Two different designs are needed in batches of 10 off of each, with manufacture being outsourced on this occasion due to a lack of in-house capacity.

  5. Drawings count: 1

    Machining-Machining, Large 1m Plus

    This client, a manufacturer of thermoforming equipment, seek assistance from a supplier who can machine the attached selection of components. A broad range of materials must be used including various grades of structural steel, carbon steel, aluminium, brass and bronze. This project involves a wide range of manufacturing processes including milling, drilling, turning and a small amount of fabrication. There is an immediate order to place, with delivery required early January 2019.

  6. Drawings count: 3

    Machining-Milling, Low Volume

    This woodworking manufacturer is in need of the assistance of a supplier who can undertake production of the attached machine brackets, to replace the existing ones in their own machinery. The order will be placed at the start of 2019, with delivery required for February - or earlier if the successful supplier's capacity allows.

  7. Drawings count: 1

    Machining-CNC Machining, Low Volume

    Quotes are urgently required for the manufacture of shafts from bright mild steel. The buyer - a company that spends upwards of £50,000 a year on outsourced machining services - seeks immediate assistance as delivery is urgently required. This has potential to become an ongoing requirement, best-suited to suppliers who can fulfil similar orders every two months.

  8. Drawings count: 1

    Fabrication-Laser cutting, tube

    Destined for end use within the industrial machinery sector, the attached tube is required by a company that places £10,000 into the the subcontract fabrication market each year. They are looking to increase their supplier base for this design and seek quotes from suppliers who can offer good value, whilst providing a high-quality end product. There is no immediate order to place; however, the buyer has advised that this will become an ongoing requirement moving forward, once an order has been confirmed.

  9. Drawings count: 4

    Machining-CNC Machining, Medium Volume

    The buyer seeks a new supplier to work with on a project that calls for the redesign of a standard airport baggage conveyor. The elements of work involved include milling, turning, tapping and drilling of pulley mounts. The ideal supplier will be able to offer good value, whilst offering a high quality end product.There is no immediate order to place; however, the buyer has advised that this will become an ongoing requirement moving forward, once an order has been confirmed.

  10. Drawings count: 1

    Fabrication-General Sheet Metal Under 6mm

    Outsourcing fabrication work to the tune of over £30,000 every year, this company is currently seeking a supplier who can manufacture the attached components, which will form part of a modular hose reel assembly. This design will be used as part of a project for the industrial machinery sector and the buyer has an order ready to place for its pre-production. The ideal supplier will be able to produce these parts economically and offer reliable delivery; once a relationship has been established, further projects could be made available in addition to this initial requirement.

  11. Drawings count: 1

    Machining-Turning, Low Volume

    This manufacturer of gas burners requires a supplier for the machining of the attached air intake. It is to be made from mild steel and will incorporate aspects of turning, chamfering and drilling. There is an immediate order to be placed; the successful supplier will also be privy to alternative opportunities with this client moving forward.

  12. Drawings count: 4

    Fabrication-General Sheet Metal Under 6mm

    Destined for end use within the printing industry, these supports are to be made from stainless steel, on behalf of a company that spends over £500,000 per year on bespoke fabricated designs. Quotes are required for 1 off of each design and the client has also advised that this will lead to repeat orders in future. This makes it an ideal opportunity to fill immediate and long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward, for similar fabrication work.

  13. Drawings count: 1

    Machining-Machining, Plastics

    This manufacturer of industrial machinery seeks a supplier to manufacture the attached motor housing from black Acetal. This project incorporates aspects of turning, milling and counter boring. The client has an immediate order to place and therefore, suppliers who can offer a fast turnaround and good value will be seen favourably. This is a one-off enquiry; however, additional, alternative work may be made available to the successful supplier.

  14. Drawings count: 2

    Finishing-Plastic Coating

    This metal spinning company, who outsources around £250,000 of manufacture a year, is looking for a supplier who can rubber coat the back-plates of the holding equipment in their spinning machines. This work could possibly become ongoing, with the machined parts to be free-issued to the chosen supplier ready for the rubber coating to be carried out.

  15. Drawings count: 6

    Machining-Machining, Large 1m Plus

    This company operates within the industrial machinery industry and outsources over £1million worth of machining work every year. They have an order to place for aluminium twisted tracks, which will be used for feeding various components into automated assembly machines. This project incorporates elements of multi-axis machining, with quotes required for 1 off each drawing. The ideal supplier will be able to provide a high-quality end product with high accuracy, whilst also undertaking both immediate and repeat orders for the designs in question.

  16. Drawings count: 5

    Machining-Turning, Low Volume

    With a £50,000 annual spend across all subcontract machining services, this manufacturer of industrial machinery is looking for assistance with production of the attached drive shafts and cap screws. They require quotes for 1 off of each, with the exception of one part for which 2 off are needed. There is an immediate order to place for the work in question. These are new designs with no current supplier and the successful vendor will be given repeat orders moving forward. A fast turnaround and reliable delivery are especially important to this buyer - once this has been proven, there is scope for the relationship to be developed further.

  17. Drawings count: 2

    Machining-Thread Cutting

    This heating equipment manufacturer, who places over £20,000 worth of work a year with subcontract machining suppliers, is looking for a Qimtek member who can assist with the external threading of tubing. The tubing is to be used within immersion heaters and there is an immediate order to place for the work in question. Delivery prior to Christmas would be ideal, making this a fantastic opportunity to fill short-term capacity.

  18. Drawings count: 1

    Casting-Forging

    This company, a manufacturer of thermal process equipment, seeks a new supplier to manufacture the attached tie bar. This is to be made from 316 bar, which must be flattened at one end and thread cut at the opposite end. There is an immediate order to place for this enquiry, with ongoing batches of 72 off required on a yearly basis. This enquiry is best-suited to those who can offer both quality manufacture and cost-effective pricing.

  19. Drawings count: 4

    Machining-Turning, Low Volume

    With a £50,000 annual spend across all subcontract machining services, this manufacturer of industrial machinery is looking for assistance with the attached pulley rods. They require quotes for batches ranging from 30 off to 40 off, for which there is an immediate order to place. These are new designs with no current supplier and the successful vendor will be given repeat orders moving forward. A fast turnaround and reliable delivery are especially important to this buyer - once this has been proven, there is scope for the relationship to be developed further.

  20. Drawings count: 2

    Machining-Machining, Large 1m Plus

    This client - a company that spends in excess of £4.5million a year on subcontract machining services - is looking to partner with a Qimtek member that can assist with the complete manufacture of the attached mandrel assemblies. This project incorporates aspects of milling, drilling and turning - please note that a small amount of fabrication may also be required. Due to the large size of some of the associated components, this project is best-suited to suppliers with overhead lifting equipment. Owing to the client's large spend, the successful supplier will secure not only the work in question, but also a long-term customer with an abundance of machining requirements.

Pages