Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

95 Projects

Displaying 1 - 20 of 95

  1. Drawings count: 2

    Machining-Turning, Low Volume

    This company urgently requests quotes for 4 off carrier assemblies to be used in a gear box. The lead time for completion of the work once the order is placed will be 2-3 months. This work was previously carried out in China, however, the buyer is keen to bring the work back to the UK. Quality, pricing and reliable delivery are all important considerations within this enquiry, with a quick turnaround on the initial quotation being crucial. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  2. Drawings count: 2

    Machining-Turning, Low Volume

    This designer and manufacturer of tooling solutions seeks a supplier to produce the attached bushes, along with the associated hardening and tapping. There is an immediate order to place for this enquiry, with delivery required by December 2nd. This is currently a one-off requirement, but may be repeated in line with customer orders going forward.

  3. Drawings count: 2

    Machining-Turning, Low Volume

    This Qimtek member currently seeks a supplier who is able to produce the attached mild steel tie rods. The client currently lacks the in-house capacity to produce these themselves and therefore, a supplier is eagerly sought for their immediate production. In addition, this has the potential to become ongoing work for the chosen supplier moving forward.

  4. Drawings count: 1

    Machining-Turning, Low Volume

    This manufacturer of yarn equipment and monitoring systems is currently in need of a supplier who can assist with the turning of the attached suction gun clip, to be used as a replacement for an older machine. They would therefore like to hear from possible Qimtek suppliers who can help. There is an immediate order to place for this enquiry, with delivery required at the supplier's earliest convenience. Although this is a one-off requirement, the chosen supplier may be asked to quote for additional, similar parts going forward, once a relationship has been established.

  5. Drawings count: 1

    Machining-Turning, Low Volume

    This manufacturer of special purpose machinery is looking for a supplier to carry out the production of a series of turned components . This project will involve aspects of turning, drilling and chamfering, with parts to be made from D2 tool steel. These parts are just a small sample of work subcontracted out by this company on a regular basis - as such, the client is looking to expand their supplier base for future batches.

  6. Drawings count: 2

    Machining-Turning, Low Volume

    This client, a manufacturer of industrial machinery who spends £350,000 a year on outsourced machining, currently seeks a supplier for immediate production of the attached range of turned components. There is an immediate order to place for these parts and the client has advised that the chosen supplier will also be asked to quote for similar enquiries moving forward. Although this is currently a one-off requirement, these components are to be repeated in line with customer demand; however, the frequency may vary and is not known at this stage.

  7. Drawings count: 1

    Machining-Turning, Low Volume

    This designer and manufacturer of tooling solutions seeks a supplier to produce the attached components. These parts require turning, milling, drilling and chamfering and should be produced in a variety of materials. There is an immediate order to place, with the possibility of ongoing and additional work to follow moving forward.

  8. Drawings count: 1

    Machining-Turning, Low Volume

    This Qimtek member currently seeks a supplier who is able to produce the attached mild steel boss. The client currently lacks the in-house capacity to produce these themselves and therefore, a supplier is eagerly sought for their immediate production. In addition, this has the potential to become ongoing work for the chosen supplier moving forward.

  9. Drawings count: 2

    Machining-Turning, Low Volume

    This client, a manufacturer of industrial machinery who spends £350k a year on outsourced machining, currently seeks a supplier for immediate production of the attached range of milled parts. There is an immediate order to place for the attached components, the client has advised that the chosen supplier will also be asked to quote on similar enquiries moving forward. Although this is currently a one off requirement, these components are to be repeated in line with their customer requirements; however, the frequency may vary and is not known at this stage.

  10. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer - who spends in excess of £100,000 a year on outsourced machining - is urgently looking for a supplier to turn the attached spacer destined for end use within the industrial machinery sector. This enquiry is of an urgent nature but could also pave the way for additional work from the company in question.

  11. Drawings count: 1

    Machining-Turning, Low Volume

    Outsourcing £50,000 worth of machining work every year, this company is looking for a supplier to undertake a turning project on their behalf. The attached adaptor is to be ordered in batches of 25 off every year and the client has an immediate order to place for 25 off. The ideal supplier will be able to offer delivery within 4 weeks of order placement. The adaptors will be used within the consumer products sector. The ongoing nature of the work makes this an opportunity to grow your long-term customer portfolio.

  12. Drawings count: 3

    Machining-Turning, Low Volume

    This cryogenics research facility is currently in need of quotations for the attached stainless steel weld sleeve's, to be used within the equipment at one of their laboratories. Spending approximately £50,000 per year on outsourced machining, the client has advised that there is an immediate order to place for this enquiry. Although this is a one-off requirement, the chosen supplier may be asked to quote for projects of a similar nature going forward, once a relationship has been established.

  13. Drawings count: 1

    Machining-Turning, Low Volume

    This cryogenics research facility is currently in need of quotations for the attached stainless steel adaptor, to be used within the equipment at one of their laboratories. Spending approximately £50,000 per year on outsourced machining, the client has advised that there is an immediate order to place for this enquiry. Although this is a one-off requirement, the chosen supplier may be asked to quote for projects of a similar nature going forward, once a relationship has been established.

  14. Drawings count: 2

    Machining-Turning, Low Volume

    This cryogenics research facility is currently in need of quotations for the attached stainless steel flange and adaptor. Spending approximately £50,000 per year on outsourced machining, the client has advised that there is an immediate order to place for this enquiry. Although this is a one-off requirement, the chosen supplier may be asked to quote for projects of a similar nature going forward, once a relationship has been established.

  15. Drawings count: 2

    Machining-Turning, Low Volume

    This buyer, a manufacturer of vacuum excavation equipment, seeks a supplier to produce the attached mild steel flanges in batches of 20 off of each at this time. The client spends £100,000 a year on bespoke machined components and requests that interested parties quote their best price and delivery in order to be considered for this opportunity. They are currently looking to improve on supplier reliability and may wish to utilise the successful vendor's services within additional projects, once a relationship has been cultivated.

  16. Drawings count: 1

    Machining-Turning, Low Volume

    This industrial machinery manufacturer, who spends in excess of £50,000 a year on bespoke machined components, is looking for a supplier to undertake production of the attached spigot. This turned, drilled and tapped part is ordered on a repeat basis and the buyer would like to hear from companies that are able to assist with its ongoing supply. There is an immediate order to place and there may also be scope for the successful supplier to assist with additional projects, alongside this initial enquiry.

  17. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer, a manufacturer of vacuum excavation equipment, seeks a supplier to produce the attached stainless steel crank shafts in batches of 20 off at this time. The client spends £100,000 a year on bespoke machined components and requests that interested parties quote their best price and delivery in order to be considered for this opportunity. They are currently looking to improve on supplier reliability and may wish to utilise the successful vendor's services with additional projects once a relationship has been cultivated.

  18. Drawings count: 1

    Machining-Turning, Low Volume

    This client, a designer and manufacturer of tooling solutions, seeks a supplier to produce the attached EN24 components. These components require turning, drilling and chamfering and should be provided hardened and ground to the drawings provided. As well as having an immediate order to place, the client has also advised that this will be an ongoing requirement going forward.

  19. Drawings count: 2

    Machining-Turning, Low Volume

    With a £10,000 annual spend on outsourced machining, this manufacturer of nuclear equipment is looking for a metal supplier that is able to undertake their current requirement. The buyer seeks quotations from prospective suppliers for the attached aluminium tube. This is a one-off requirement, although it may lead to additional enquiries of a similar nature for the chosen supplier once a relationship has been established. Please be aware that the buyer's requirements are project-driven and therefore, any orders are placed on an ad-hoc basis.

  20. Drawings count: 4

    Machining-Turning, Low Volume

    This manufacturing consultancy company, who outsources approximately £75,000 worth of machining each year, currently seeks quotations on behalf of their client for updated versions of the attached turned rollers, to be used within printing equipment. Currently, these rollers catch onto the labels, resulting in unwanted shredding; thus, the buyer seeks indicative quotations from prospective suppliers to manufacture the attached design, to be supplied with a rubber cover to prevent damage to the labelling. Although there is no immediate order to place, if the end client is happy with the responses and they move forward with the order, this will become ongoing work for the chosen supplier, repeated once a year in line with wear-and-tear.

Pages