Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

48 Projects

Displaying 1 - 20 of 48

  1. Drawings count: 2

    Fabrication-Laser cutting, tube

    This rail company seeks a second source supplier for their laser tube cutting requirements, on which they spend over £500,000 every year. They would like to establish initial contact with those who have laser tube cutting capabilities, in order to manufacture a selection of inner/outer tubes on their behalf. This buyer values excellent communication and punctual delivery, as well as good value. This is an excellent opportunity to join the PSL of a large-spending company and should not be missed by those that are looking to supplement their long-term customer portfolio.

  2. Drawings count: 3

    Fabrication-Laser Cutting

    This rail company seeks a second source supplier for their laser cutting requirements, on which they spend over £500,000 every year. They would like to establish initial contact with those who have laser cutting capabilities, in order to manufacture a selection of plates on their behalf. This buyer values excellent communication and punctual delivery, as well as good value. This is an excellent opportunity to join the PSL of a large-spending company and should not be missed by those who are looking to supplement their long-term customer portfolio.

  3. Drawings count: 3

    Plastic & Rubber-GRP Moulding

    This start-up company is currently seeking a supplier who can manufacture the attached hyperloop pod fibreglass shell. The buyer has an order ready to place for its production and is open to suggestions for the overall thickness and sizing of the shell. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss. The ideal supplier will be able to produce these parts economically and provide a high-quality end product. Delivery on time is also important for this request. Once a relationship has been established, further projects could be made available in addition to this initial requirement.

  4. Drawings count: 1

    Machining-Turning, High Volume

    Machining suppliers are sought, in order to provide a quotation for the attached spray tips. These parts are currently made by a vendor in Germany who is struggling to keep up with the required lead times. The buyer behind this enquiry spends in excess of £150,000 per annum on all outsourced machined parts and would like to talk to Qimtek members who can uphold a high standard of quality and a two week lead time. There will be an order to place with the chosen supplier, as well as ongoing work moving forward.

  5. Drawings count: 2

    Casting-Sand Casting

    This rail company seeks a second source supplier for their casting & machining requirements, on which they spend over £200,000 every year. They are looking to build a long-term relationship with a supplier who can work with strict lead times of two to three weeks. This buyer values excellent communication and punctual delivery, as well as good value. This is an excellent opportunity to join the PSL of a large-spending company and should not be missed by those that are looking to supplement their long-term customer portfolio.

  6. Drawings count: 1

    Machining-Turning, Low Volume

    Destined for end use within the rail industry, the attached bolt is to be turned and threaded in a batch of 10 off. The buyer is a Qimtek member who spends over £20,000 a year on subcontract machining services. They are looking to outsource this work to a third party who can offer good value and reliable delivery, with similar work available moving forward. Those that are interested in being considered for this opportunity are asked to make contact with the buyer directly.

  7. Drawings count: 1

    Fabrication-General Sheet Metal Under 6mm

    This company,who outsource fabrication work to the sum of £250,000 annually, seek quotes for the manufacture of two fabricated assemblies in accordance with the drawings attached. The Client is looking for a supplier to not only complete this work, but also to take on additional subcontract opportunities. Quotes are required for 2 off each assembly with ongoing batches to be discussed at a later stage. These items are destined for end use within the rail sector and so suppliers with competitive pricing are highly sought. This project will involve cutting, folding and welding with some components requiring additional finishing processes to be completed .

  8. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    The attached trolley handle assembly is required by a manufacturer working within the rail industry. The client seeks quotes for 2 off completed assemblies which will in-turn lead to annual orders moving forward. Cost is a key component of this project and interested parties are asked to quote their best possible price.

  9. Drawings count: 2

    Machining-Turning, Medium Volume

    An electromechanical component manufacturer seeks assistance from a third party who can turn and thread stainless steel rods for use within the rail industry. There are two rod designs, each required in batches of 500 off. Please note, price is of utmost importance to this buyer.

  10. Drawings count: 1

    Machining-Machining, Large 1m Plus

    The attached post is to be machined from free-issue wood. It is a typical example of a range of posts that the client will order in a full set, in order to make a complete railway platform shelter. Spending £15,000 a year in the subcontract machining market, they specialise in product design and seek a production partner who can offer good quality and efficiency. The scope of work on offer is substantial and should not be missed by those that are looking to supplement their long-term workload.

  11. Drawings count: 2

    Machining-Milling, Low Volume

    Destined for use within the rail industry, the attached sidewall mount is to be milled from mild steel. The client requires 45 off of this item and would like to place the work with an external supplier who can offer a high standard of quality. This forms part of a larger job for which the client is currently tendering; if successful, there is a possibility that this could become an ongoing requirement. In addition, the buyer may look to place more of their £50,000 annual machining spend with the supplier that they choose for this project.

  12. Drawings count: 2

    Machining-Grinding

    Surface grinding of free-issue pins is needed, on behalf of a company that places £40,000 a year into the subcontract machining market. They are outsourcing this process due to a current lack of in-house capacity and would like to speak with suppliers that can offer a high level of quality, as well as good value. There is an immediate order to place for 500 off, which the client has advised is very likely to repeat moving forward.

  13. Drawings count: 0

    Machining-CNC Machining, Medium Volume

    This rail company seeks a second source supplier for their machining requirements, on which they spend over £500,000 every year. They would like to establish initial contact with those who have milling, turning and tapping capabilities, in order to manufacture a selection of bushes and pins on their behalf. This buyer values excellent communication and punctual delivery, as well as good value. This is an excellent opportunity to join the PSL of a large-spending company and should not be missed by those that are looking to supplement their long-term customer portfolio.

  14. Drawings count: 1

    Machining-Milling, Low Volume

    ISO 9001 suppliers are asked to quote on the attached Stainless steel end plates, which are sought by a buyer who operates within the rail industry. Their combined annual spend on outsourced services exceeds £25,000 and as such, the buyer has advised that similar work will also be made available to the sucsessful supplier.

  15. Drawings count: 1

    Fabrication-Fabrication with Machining

    Suppliers with multiple in-house capabilities are sought, in order to provide a quotation for the fabrication and machining of a stainless steel "Header Kit". They seek a second source supplier for this product range in order to reduce production lead times. Owing to the nature of the enquiry and the buyers impressive spend, the successful suppler can expect ongoing and additional work to follow.

  16. Drawings count: 1

    Machining-CNC Machining, High Volume

    Drain valves are to be manufactured for use within an application for the rail industry. The client is looking for a supplier whose in-house capabilities allow production of larger batches, as they have an immediate order to place for 2600 off. Delivery by the beginning of June is preferable; however, please be advised that there is some flexibility. Suppliers should make contact with the buyer directly to discuss the opportunity.

  17. Drawings count: 1

    Fabrication-Rolling

    Rolling of a pipe is needed as part of an application for the rail industry. The client - a company that outsources fabrication work to the tune of £40,000 a year - is looking to work with a supplier that can assist with an immediate order of 2 off, followed by repeat orders moving forward. This makes the enquiry an opportunity to win not only the work in question, but also a new long-term customer.

  18. Drawings count: 3

    Fabrication-General Fabrication 6-15mm

    This Qimtek member spends in excess of £30,000 a year on outsourced manufactured components and urgently requires the attached mild steel "end frames". The client will look to place an immediate order for 8 off each design with another 32 of each required over the next 12 months.

  19. Drawings count: 2

    Fabrication-General Fabrication 6-15mm

    The attached mild steel parts are required for use within the rail industry.This work will involve aspects of cutting and welding of box section, sheet and bar meaning this project would suit suppliers with multiple in house capabilities. The client is a company that outsources in excess of £25,000 worth of fabrication work every year. There is an order to place with the possibility of additional work becoming available at a later stage. Suppliers are asked to quote their best price and delivery in order to be considered for the opportunity.

  20. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This Qimtek member spends £20,000 a year on bespoke machined components and requires the attached carbon steel tee bolt for use within the rail industry. The client will look to place an immediate order for 100 off and it is essential that interested suppliers are ISO 9001 accredited. There may also be scope for diversification into additional projects, once a relationship with the buyer has been cultivated.

Pages