Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

67 Projects

Displaying 1 - 20 of 67

  1. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This client, a provider of domestic and commercial electrical solutions , seeks a supplier who is able to produce the attached stainless steel components. There is an immediate order to place with ongoing work to follow, making this an excellent opportunity for those looking to secure both immediate and ongoing enquiries. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  2. Drawings count: 3

    Machining-CNC Machining, Medium Volume

    The attached mild steel components require machining in accordance with the drawing, with drilling and tapping of M12 thread. 100 off of each part will be required, which are destined for end use within the marine industry. Those with the capacity and the capabilities to assist are asked to email their quotations to the buyer to be considered. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfill the requirement.**

  3. Drawings count: 5

    Plastic & Rubber-Injection Moulding

    This company currently seeks quotes for the moulding of foam components, which will be used within the upholstery of a yacht. 1000 off of each item will be required per year over regular call-offs and the client has advised that this could potentially lead to many more foam moulding opportunities for the successful supplier as the need arises within future projects. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  4. Drawings count: 1

    Machining-Turning, Medium Volume

    This company is currently seeking best price and lead time on the attached Spacer and Bosses. They are looking at annual quantities and call offs range from 50 off to 100 off per part. They would be interested in also knowing the price breaks for higher volumes. Stainless Steel Grade 304

  5. Drawings count: 1

    Full turnkey-Fabrication with Machining

    This company are specialists in the production of marine safety and environmental products. They are currently seeking prices for the complete manufacture and supply of adjustable ceiling fixings that suspend plastic screens from the ceiling. There are aspects of machining, wire forming and plastic fabrication involved in this project. The fixing also needs to be height adjustable.

  6. Drawings count: 1

    Machining-Turning, Low Volume

    This company is currently seeking quotes for the production of shafts for their electric motors. They are currently looking to have 8 samples made within the next few weeks. Once they are tested and approved, they will be ordered in larger quantities. Please quote best price and lead time on these 8 samples.

  7. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This buyer is currently seeking quotes for the manufacture of a base plinth that will be used for a table on a super-yacht. Aesthetic quality and the flatness of both the top and bottom surface are extremely important. The fabrication will probably need to be skimmed to allow for quality mirror polishing, that will be required on this product. Please note the buyer is based in Bedfordshire and is ideally looking for a localish supplier.

  8. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer, who is involve in the marine rigging industry, is looking for an urgent response to a one off part. There is an order to place for this. A material certificate needs to be supplied.

  9. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This company specialises in subsea operations within the oil & gas industry and the development of many types of subsea equipment. They have an immediate order to place for this design of camera split housing which they cannot make themselves in-house. Quotes are required for 1 off at this time, but once a relationship is established, this may also lead to ad-hoc, similar work on an ongoing basis. On-time delivery is paramount due to a short client lead time and pricing and quality are also key for this enquiry.

  10. Drawings count: 3

    Machining-Turning, Low Volume

    This company has an order to place for the attached flanges and plates. Specialising in subsea equipment for the oil and gas industry, quotes are required for 1 off of each design with the components to be produced from free-issue material. The ideal candidate will be able to produce these parts in a cost effective manner whilst maintaining high quality sand strict delivery. If these prototypes are successful then they will be repeated going forward however, the quantity and frequency is not yet known.

  11. Drawings count: 2

    Plastic & Rubber-GRP Moulding

    This company specialises in boat and yacht exhausts for the marine industry and is looking for a supplier to mould lift silencers which will be used with the exhaust system. Tooling is also required. There are a few sizes of these components; however, quotes are required for a basic size as shown, with scope for small size variances later. Quotes are required for 500 off per year, which will most likely be ordered in regular call offs of 100 off. Pricing and quality/accuracy to drawings is vital for this enquiry and once a supplier is found, there will be additional opportunity for increased volumes in the future.

  12. Drawings count: 1

    Machining-Turning, Low Volume

    This company has an order to place for the attached interface. Specialising in subsea equipment for the oil and gas industry, quotes are required for 1 off of this design and the buyer has requested that quotes are provided for machining of free-issue material and/or complete supply. Pricing, a good quality finish and delivery is very important with delivery being key, as this interface is required with a short lead time from the client. Therefore, should a suitable quote be received quickly, the work may be awarded early.

  13. Drawings count: 5

    Machining-Machining, Large 1m Plus

    This company specialises in subsea solutions for oil and gas industry and has an order to place for these mast tubes, connectors and interface. Quotes are required for 1 off of each part and the buyer has requested that quotes are provided for machining of free-issue material and/or complete supply. Pricing, a good quality finish and delivery is very important with delivery being key, as these parts are required with a short lead time from the client. Therefore, should a suitable quote be received quickly, the work may be awarded early.

  14. Drawings count: 3

    Machining-Machining, Plastics

    This company operates within the marine industry and has an immediate order to place for the attached Delrin jaws, which will be used within testing equipment for scuba gear. This project incorporates elements of milling and drilling, with quotes required for 10 and 20 off of each part. The ideal supplier will be able to provide a high-quality end product and once a relationship has been established, further projects could be made available in addition to this requirement.

  15. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This company operates within the marine industry and has an immediate order to place for stainless steel 316L yoke clamps, which will be used within testing equipment for scuba gear. The clamps are normally produced from brass forging and then machined, but due to the volume required, they will need to be machined from billet. This project incorporates elements of turning, milling and threading, with quotes required for 600 pieces supplied in batches of 200 off. The ideal supplier will be able to provide a high-quality end product and once a relationship has been established, further projects could be made available in addition to this requirement.

  16. Drawings count: 1

    Machining-CNC Machining, Low Volume

    A new buyer to Qimtek, who operates within the nuclear industry, seeks a new supplier for the attached actuator nut. The parts will be supplied free-issue and finished machined, less the thread. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  17. Drawings count: 3

    Machining-Machining, Plastics

    Destined for end use within the marine industry, these markers are to be made from acrylic on behalf of a company that spends over £50,000 per year on bespoke machined designs. Quotes are required for an array of medium-size batch quantities and the client has also advised that this will be an ongoing requirement, making it an ideal opportunity to fill immediate capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  18. Drawings count: 3

    Machining-Machining, Plastics

    This company has an immediate order to place for the attached subsea torch components, which will be used in depths of up to 1000m underwater. This is a redesign of a previous torch, with quotes required for 25 off of each component. Delivery lead times are critical for this enquiry and once a relationship has been established, further projects could be made available in addition to this initial requirement.

  19. Drawings count: 1

    Machining-Machining, Plastics

    This new company to Qimtek has an order to place for the attached front port, which will form part of subsea lamps to be used in depths of up to 1000m underwater. Once received, these will be pressure tested by the client before use. Quality and accuracy of these components is paramount, as well as reliable delivery and pricing. This company has an annual spend of over £100,000 per year on bespoke machined components and will be placing regular orders every 2-3 months at this volume with the chosen supplier. This makes it a great opportunity to form a long-term relationship with a new client in this industry. It could also lead to further, similar work in addition to this initial enquiry.

  20. Drawings count: 2

    Machining-CNC Machining, Low Volume

    This new company to Qimtek spends over £100,000 on bespoke machined components and has an order to place for this aluminium housing and end cap. These will form part of subsea lamps which will be used in depths of up to 1000m underwater. Once received, the parts will be pressure tested by the client before use. Quality and accuracy of these components is paramount, as well as reliable delivery and pricing. With regular orders every 2-3 months at this volume, this is a great opportunity to form a long-term partnership with a new client in this industry. Once a relationship has been established, this could also lead to further, similar work in addition to this initial enquiry.

Pages