Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

179 Projects

Displaying 1 - 20 of 179

  1. Drawings count: 2

    Plastic & Rubber-Plastic Fabrication

    This organization is a 3,400 strong volunteer-run nonprofit incubator organization, with engineers, scientists, and doctors around the world dedicated to helping the world address the COVID-19 pandemic. They are urgently asking for quotes and fastest lead time to build acrylic Intubation boxes that reduce the aerosol transmission of Covid 19 to clinical staff during the intubation process. Feedback from clinical staff is positive and we now urgently want to produce some samples for further testing before roll out. We are looking for 4 boxes as a prototype and then if trials are successful then rollout out to wider NHS. US experience suggests 1-3 units per hospital. Open source plans are attached (which may lead to modification post trial) and a briefing note to help you understand the context of use and benefit for NHS. This project is looking to crowdfund the work so any discounting or free work would be greatly appreciated.

  2. Drawings count: 1

    Sheet Metal Forming-Spring Manufacturing

    This company who manufacture custom optical components and assemblies are looking for best price and lead time for small custom springs. The parts are to be made from Spring Stainless steel sheet. Please pay attention to the Notes on the drawing. The part needs a bow as shown on the isometric view and there are to be no sharp edges.

  3. Drawings count: 1

    Profiling-Water Cutting

    This company has an order to place for these six designs of aluminium plate which will form part of a tank for engineering research purposes. Budget pricing has been requested based upon the attached Step files, and the client has confirmed they will be able to provide full drawings when placing the order. The ideal supplier will be able to produce these parts economically and offer reliable delivery and once a relationship has been established, further projects could be made available in addition to this initial requirement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  4. Drawings count: 6

    Machining-CNC Machining, Low Volume

    This cryogenics research facility, who outsources approximately £50,000 worth of machining each year, is in need of a supplier who can assist with the immediate production of the attached range of assemblies which are required urgently. These components are to be used within their research equipment. Owing to the nature of this enquiry it is a one-off requirement with an immediate order to place; however, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  5. Drawings count: 1

    Machining-Boring

    This cryogenics research facility, who outsources approximately £50,000 worth of machining each year, is in need of a supplier who can assist with the immediate production of the attached housing shaft, which will require full-length boring. These components are to be used within their research equipment. Owing to the nature of this enquiry it is a one-off requirement with an immediate order to place; however, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  6. Drawings count: 8

    Machining-CNC Machining, Low Volume

    This cryogenics research facility, who outsources approximately £50,000 worth of machining each year, is in need of a supplier who can assist with the immediate production of the attached turned, milled, and knurled components for use within their research. Owing to the nature of this enquiry it is a one-off requirement with an immediate order to place; however, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  7. Drawings count: 3

    Machining-Turning, Low Volume

    Outsourcing approximately £50,000 worth of machining each year, this cryogenics research facility is in need of a supplier who can assist with the immediate production of the attached turned and knurled components for use within their research equipment. The client has advised that owing to the nature of this enquiry, there is an immediate order to place and this is a one-off requirement; however, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  8. Drawings count: 3

    Full turnkey-Fabrication with Machining

    This buyer has just completed a new design of aluminium drip tray, which also requires a turned aluminium boss, and has an order to place for 1 off of each. The tray requires flat sheet to be folded and the seams to be welded together. The machined and threaded boss then needs to be welded to the base as per the drawings included in this project. Price and reliable delivery are the critical factors for this enquiry, with scope for similar work to follow going forward once this initial enquiry is completed. Because of the short lead time for this enquiry, should a suitable quote arrive quickly, this project may be awarded early.

  9. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    This client, a manufacturer of medical and scientific equipment who spends £50,000 a year on subcontract services, currently seeks a new partner to produce the attached components for a cage rack assembly. These are to be produced from aluminium and require cutting, welding and a small amount of drilling. Their current supplier can no longer facilitate the manufacture of these parts and therefore, this provides an opportunity for a new supplier to take over production moving forward.

  10. Drawings count: 7

    Fabrication-Light Fabrication (under a tonne)

    This client, a manufacturer of medical and scientific equipment who spends £50,000 a year on subcontract services, currently seeks a new partner to produce these frames in order to complete the attached cage rack assembly. These are to be produced from aluminium and require cutting, welding and a small amount of drilling. Their current supplier can no longer facilitate the manufacture of these parts and therefore, this provides an opportunity for a new supplier to take over production moving forward.

  11. Drawings count: 2

    Machining-CNC Machining, Low Volume

    Outsourcing approximately £50,000 worth of machining each year, this cryogenics research facility is in need of a supplier who can assist with the immediate production of the attached flange for use within their research equipment. The client has advised that there is an immediate order to place for this enquiry and although this is a one-off requirement, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  12. Drawings count: 1

    Electronic / Electrical-PCB Assembly, Through Hole

    This company - a manufacturer of equipment for the medical/scientific industry - is looking to build a relationship with a PCB specialist that can produce the attached double-sided, two-layered circuit boards. The boards will be used to transfer flexible grids within the client's products. There is an initial order to place for 4 off, with plenty of potential for repeat work moving forward. This may make this opportunity especially well-suited to those that are looking to grow their long-term customer base.

  13. Drawings count: 1

    Profiling-Laser Cutting

    Destined for end use within the radar & satellite/space industry, these element arrays are to be made from aluminium, on behalf of a new company to Qimtek. This enquiry forms part of a transportable/deployable radio telescope aimed to be used for educational purposes within universities and STEM projects. Quotes are required for 4 off and the client has also advised that this will be an ongoing requirement, making it an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  14. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    This client, a manufacturer of medical and scientific equipment who spends £50,000 a year on subcontract services, currently seeks a new partner to produce the attached turned interlock latches. These are to be produced from 316 stainless steel and require cutting, welding and a small amount of drilling. There is an immediate order to place for this enquiry with delivery required by 06/03/20 at the latest. Their current supplier can no longer facilitate the manufacture of these parts and therefore, this provides an opportunity for a new supplier to take over production moving forward.

  15. Drawings count: 2

    Machining-Turning, Low Volume

    This client, a manufacturer of medical and scientific equipment who spends £50,000 a year on subcontract machining, currently seeks a new partner to produce the attached turned interlock bars. There is an immediate order to place for this enquiry, with delivery required by 06/03/20 at the latest. Their current supplier can no longer facilitate the manufacture of these bars and therefore, this provides an opportunity for a new supplier to take over production moving forward.

  16. Drawings count: 4

    Machining-Turning, Low Volume

    This cryogenics research facility, who outsources approximately £50,000 worth of machining each year, is in need of a supplier who can assist with the immediate production of the attached flanges and adaptors for use within their research equipment. The client has advised that there is an immediate order to place for this enquiry and although this is a one-off requirement, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  17. Drawings count: 4

    Machining-Machining, Large 1m Plus

    This cryogenics research facility is in need of a supplier who can assist with the immediate production of the attached components, incorporating turning, tapping and drilling processes. There is an immediate order to place for this enquiry, for which the buyer would like to move forward as soon as the right supplier is found. Delivery is ideally required by March 13th. Although these parts are only required once, the buyer does require similar sized parts on a monthly basis, meaning this enquiry will lead to ongoing work for the chosen supplier.

  18. Drawings count: 3

    Machining-Turning, Medium Volume

    This regular buyer to Qimtek has an order to place for these three designs of sensor handle assembly - each one made up of three separate parts, which are manufactured using PTFE, Black Delrin and Aluminium. The handles will be used as part of thermometer equipment; they are usually made in-house, but due to being over-capacity, this company is seeking a supplier to manufacture these on their behalf going forward. This will lead to regular, repeat orders once a relationship is established. Because these handles will be highly visible and used daily, excellent quality is of the utmost importance for this enquiry. Quotes are sought for 50 off and 100 off, as directed in the batch size information.

  19. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This client, a manufacturer of medical care equipment who spends £1million a year on subcontract fabrication services, urgently seeks a supplier to provide a quotation for the attached telescopic side rail. This comprehensive enquiry involves aspects of cutting, folding, bending, butt welding and powder coating. Once the feasibility of this project has been confirmed, the successful supplier will secure not only this one-off requirement, but also additional, similar opportunities moving forward. Please note that this project comes with a critical delivery date of Friday 14th February.

  20. Drawings count: 3

    Machining-CNC Machining, Low Volume

    This manufacturer of bespoke cryogenic equipment is currently experiencing manufacturing and delivery setbacks with their current supply chain in China and would like to hear from UK manufacturers who can assist. The client seeks quotes for three different packages of machined parts, which are to be made from a multitude of metal materials. There is an immediate order to place for this enquiry, with delivery required at the supplier's earliest convenience. This is a one-off requirement, although the chosen supplier may be asked to manufacture additional, similar components going forward.

Pages