Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

125 Projects

Displaying 1 - 20 of 125

  1. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    A new buyer to Qimtek specialising in filters, seeks a new supplier for the attached stainless steel exhaust filter parts. The buyer behind this enquiry works within the appliance industry and has a sizeable outsourcing spend of £70,000 per annum on fabrication processes. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  2. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This marine manufacturer is in need of a quick turnaround on the attached cut and folded range of components, to be made from stainless steel. There is an immediate order to place for this enquiry and although it is currently a one-off requirement, these parts are required with each project and therefore, the order will be repeated on an ad-hoc basis going forward.

  3. Drawings count: 7

    Profiling-Laser cutting, tube

    This client, a company outsourcing an impressive £500,000 worth of fabrication work every year, currently seeks a supplier to cut the attached S275 tubes. There is an immediate order to place for this enquiry, with suppliers required to quote for the RSA bars with holes in attached PSD book and material lists as per attached, with etch lines where additional cutting is required and bar marks etched onto the surface.

  4. Drawings count: 4

    Machining-CNC Machining, Low Volume

    This client, a research fellow at Surrey University, urgently seeks a supplier to produce the attached front and rear yokes. The yokes are to be made from Maximag iron and requires drilling, turning, milling and tapping. Delivery and lead-time are the most important considerations within this enquiry, with delivery needed by the second week of September at the latest. However, owing to the product's end use, quality is also very important.

  5. Drawings count: 1

    Fabrication-General Fabrication (over 1 tonne)

    Destined for end use within the oil/chemical/energy industry, the attached pipe assemblies are required in batches of 60 off at a time. The client is looking to partner with a supplier who can offer reliable delivery and great quality, as well as a cost-effective quote. They have advised that a hydroforming process would also be suitable. Those with the capacity and the capabilities to assist are asked to make contact with the buyer directly to discuss.

  6. Drawings count: 2

    Machining-Gear Cutting

    This regular buyer to Qimtek has an order to place for these sets of gears, which are to be used within the energy sector. Quotes are required for 150 off, which will be ordered as a blanket order with an initial call-off of 30 off sets in early September, followed by monthly call-offs of 15 off sets every month except December and January, ending in July 2021. This will be a good opportunity for a supplier looking for regular work with an established company. Pricing, quality and on-time delivery are all key requirements within this enquiry.

  7. Drawings count: 2

    Machining-Broaching & Splining

    This subsea engineering company and manufacturer of oil field equipment, is in urgent need of a supplier who is able to turn around the attached stainless steel components. There is an immediate order to place for this enquiry with delivery sought at the supplier's earliest convenience. This is currently a one-off, project-based requirement, although the chosen supplier may be asked to quote and manufacture additional, similar components going forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  8. Drawings count: 7

    Machining-CNC Machining, Low Volume

    This client, a subsea engineering company and manufacturer of oil field equipment, is in urgent need of a supplier who is able to turnaround the attached mind steel components. There is an immediate order to place for this enquiry and although this is only currently a one-off requirement, the chosen supplier may be asked to manufacture additional similar parts going forward, once a relationship has been established.

  9. Drawings count: 2

    Sheet Metal Forming-Metal Spinning

    This client is looking to receive quotes for a spun metal hood in three different materials for a project that they are aiming to have completed this year. The buyer is looking to purchase 10-15 off in each material annually, making this an excellent opportunity to secure repeat work. The parts in question will be used within the oil/chemical/energy sector. Aluminium, Carbon steel, Stainless Steel **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  10. Drawings count: 1

    Sheet Metal Forming-Deep Drawing

    This client is currently working on behalf of a company who is seeking to develop a device that contains a consumable rod/pod (containing 'active material') to be heated through induction heating. The client would like to speak to suppliers who are capable of producing millions/billions off of this part. Deep drawings has been suggested as the best production method to meet demand, although the client is open to receiving quotes for alternative manufacturing options such as turning and tube laser cutting. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  11. Drawings count: 2

    Machining-Turning, High Volume

    2000-4000 off of the attached rings are required annually for the next ten years, for end use within the nuclear sector. The client is looking to receive quotes urgently for this work and therefore, interested suppliers are asked to make contact at their earliest convenience to be considered. The lead time is to be discussed with the chosen supplier directly at a later date.

  12. Drawings count: 1

    Machining-Machining, Plastics

    This buyer is currently looking for the best method of manufacture for a universal probe handle used widely in gas detection. Ideally they will be looking at having these manufactured in high volume (1000's). They will require a few prototypes and they may have redesigns during this process. The buyer is looking for a supplier that can work with them on the part as this will most likely lead to ongoing work. The buyer has suggested Polyethylene as the material, however should a supplier know of alternative or more suitable types of plastic, please include this when quoting. Please Note, that due to the potential volumes of this part, it will also be sent to Qimtek Injection Moulding Suppliers.

  13. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This Qimtek member has been asked to source quotes and lead times for the attached machined flange ring. Material required is Titanium grade 2

  14. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This client, a company spends over £300,000 a year on subcontract engineering, currently seeks a supplier with the capabilities to produce the attached set of components. This project involves cutting, folding, drilling and welding with the items to be supplied with zinc plate and clear passivate . There is an order to place for this enquiry, making it an excellent opportunity for those with immediate capacity to fill. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  15. Drawings count: 4

    Machining-Turning, Low Volume

    This buyer, within the Oil & Gas industry, is seeking quotes and delivery for the machined components for a mandrel assembly. The buyer is ideally looking for delivery within the next 2-3 weeks. Parts are only to be manufactured- assembly will be completed in house.

  16. Drawings count: 4

    Casting-Investment / Lost Wax

    This new buyer to Qimtek is a leading manufacturing company who offers explosion protection solutions for the material handling and oil & gas industries. They seek a supplier with whom they can build a relationship with on this new project. The material used needs to be an easily machinable carbon steel grade. The buyer would welcome advice and any suggestions surrounding the manufacture and design within this project. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. As the client spends over £800,000 a year on subcontract fabrication and machining services, there could be scope for the chosen supplier to diversify into additional requirements, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  17. Drawings count: 3

    Machining-CNC Machining, Low Volume

    This manufacturer of gas analysis equipment, who outsources approximately £150,000 worth of machining work each year, is looking to increase their supplier base with additional and alternative UK-based machinists, and would like to hear from interested parties with quotations for the attached sample components. There is an immediate order to place for these parts, with delivery required by April 21st. This will be a one-off requirement, although the chosen supplier will be asked to manufacture additional, similar components going forward, once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  18. Drawings count: 2

    Full turnkey-Fabrication with Machining

    With an annual spend of over £200,000 each year on bespoke designs, this regular buyer to Qimtek has an enquiry for the attached design of head weldment, which requires various machining and fabrication processes as well as arc welding. Quotes are sought for 67 off, which is the estimated annual requirement. When an order is ready to place, it will be split into monthly call-offs, meaning that this is a fantastic opportunity for long-term capacity fulfilment with a new client. Pricing, on-time delivery and a high-quality product are all important elements of this enquiry.

  19. Drawings count: 1

    Full turnkey-Machining with Fabrication

    This company is looking for a supplier to make and assemble the attached design to form a head weldment, on behalf of their client. Quotes are sought for 17 off at this time. Pricing, a high-quality end product and on-time delivery are all important factors within this enquiry, which may also lead to similar, additional work, including repeat orders of this design for the chosen supplier.

  20. Drawings count: 1

    Full turnkey-Fabrication with Machining

    With an outsourcing spend of over £200,000 on bespoke designs, this company is looking for quotes for 30 off of the attached design of head weldment on behalf of their client. Machining and fabrication processes are required for this enquiry, along with welding and full assembly. A good price, on-time delivery and a good quality end product are all key factors within this project, with scope for further work for the chosen supplier once a relationship is established.

Pages