Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

96 Projects

Displaying 1 - 20 of 96

  1. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This client is looking for a new supplier and has an immediate order to place for cutting and bending 4mm mild steel sheet to make pin shields, which will be used within the agriculture/horticulture industry. Quotes are required for 50 off, which will lead to an annual repeat order for the chosen supplier. A high-quality end product is sought, with a good value price and reliable delivery. In addition to this annual requirement, this could also lead to additional orders of similar components from the client.

  2. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This client has an immediate order to place for soil samplers, due to their current supplier being over-capacity. This project incorporates elements of sheet metal forming, welding and tube bending, with quotes required for 5 off and 10 off. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  3. Drawings count: 1

    Fabrication-Fabrication with Machining

    This project is compiled of several parts which - when assembled - will create a chainsaw guard. There are many fabrication and machining processes required to manufacture this full request - the client has also confirmed that if welding capabilities are not available, the supplier is to state this within their quotation, as the client can weld the parts together if needed. The client is over capacity and therefore, they are looking for a new supplier to manufacture these components on their behalf. The ideal supplier will be able to manufacture these designs economically with a quality finish, within a 3-4 week lead time. This will lead to ongoing work, once the initial request of 10 off assemblies is completed.

  4. Drawings count: 3

    Machining-Machining with Fabrication

    This company is currently over capacity and is therefore looking for a new supplier to assist with an immediate requirement, leading to ongoing work moving forward. This project is compiled of machined and fabricated rings, blocks and plates, incorporating many engineering processes. The ideal supplier will be able to manufacture these parts economically within a 3-4 week lead time. The client has also confirmed that if welding capabilities are not available, the supplier is to state this within their quote, as the client can weld the parts together if needed. With an annual spend of over £150,000 on machined and fabricated products, this will be an ideal match for those looking for ongoing and varied work.

  5. Drawings count: 6

    Profiling-Laser Cutting

    This manufacturer of fabrication equipment who spends around £500,000 a year on outsourced fabrication, is currently looking to move the profiling of their brackets under one roof - subsequently, they would like to hear from interested parties. There is an immediate order to place for the attached parts, with delivery required at the supplier's earliest convenience. In addition, at least another 10 bracket designs which are less common, will also be required from the chosen supplier. These orders are to be repeated on a yearly basis, making this a good opportunity for suppliers looking for a new long-term buyer.

  6. Drawings count: 1

    Sheet Metal Forming-Heavy Sheet Metal (6mm+)

    This company operates within the agriculture and horticulture industries and outsources over £100,000 worth of fabrication work every year. They have an immediate order to place for the fabrication and assembly of moving jaws and fixed jaws. This project incorporates elements of laser cutting, folding, welding and threading, with quotes required for 12 off. The ideal supplier will be able to offer reliable delivery and provide a high-quality end product; once a relationship has been established, further projects could be made available in addition to this initial requirement.

  7. Drawings count: 1

    Profiling-Water Cutting

    This company is looking for urgent quotes for 1 off and 3 off mild steel deck weights, to be used in the agriculture industry as an immediate requirement. The ideal supplier will be able to offer reliable delivery and once a relationship has been established, further projects could be made available in addition to this initial requirement.

  8. Drawings count: 1

    Machining-Milling, Low Volume

    Destined for end use within the agriculture industry, these swivel blocks are to be made from mild steel, on behalf of a company that spends over £50,000 per year on bespoke machined designs. Ideally, the client requires quotes for 5 off to be submitted this week and has also advised that this will be an ongoing requirement, making it an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the buyer moving forward.

  9. Drawings count: 2

    Machining-Machining, Multi-Axis

    This company operates within the agriculture industry and outsources over £50,000 worth of machining work every year. They have an immediate order to place for double helix anchor tips. This project incorporates elements of turning, with quotes required for 1000 off each size. The ideal supplier will be able to produce these parts economically and provide a high-quality end product; once a relationship has been established, further projects could be made available in addition to this initial requirement.

  10. Drawings count: 2

    Casting-Die Casting, Pressure

    This company operates within the agriculture industry. They have an immediate order to place for double helix anchor tips and will consider other methods of casting, alongside pressure die casting. Quotes are required for 1000 off each anchor tip. The ideal supplier will be able to produce these parts economically and provide a high-quality end product; once a relationship has been established, further projects could be made available in addition to this initial requirement.

  11. Drawings count: 1

    Machining-Turning, Low Volume

    Destined for end use within the agriculture industry, these flange hubs are to be made from mild steel, on behalf of a company that spends over £50,000 per year on bespoke machined designs. Quotes are required for 2 off and the client has also advised that this will be an one-off requirement, making it an ideal opportunity to fill short-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  12. Drawings count: 3

    Fabrication-Fabrication with Machining

    Suppliers that have the capabilities required to produce the attached auger are sought, on behalf of a company that spends over £90,000 a year on bespoke fabrication services. They are looking for a vendor that can assist not only with this initial requirement, but also with the production of various sizes moving forward. This may make it especially well-suited to those who are looking to increase their long-term customer base moving into the new year.

  13. Drawings count: 1

    Fabrication-General Fabrication (over 1 tonne)

    Outsourcing fabrication work to the tune of £100,000 every year, this company is currently seeking a supplier who can manufacture the attached box section post with a capped top. This design will be used as part of a project for the landscaping sector and the buyer is currently looking at external quotes due to a lack of in-house capacity. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in repeatable work once quality and reliability have been proven.

  14. Drawings count: 3

    Fabrication-Fabrication with Machining

    This company operates within the horticulture and agriculture industry and outsources over £150k worth of fabrication and machining work every year. They have an immediate order to place for steering boxes and countersunk washers which are required this month if possible. This project incorporates elements of fabrication and turning, with quotes required for 10 off and 50 off as shown. The ideal supplier will be able to produce these parts economically and once a relationship has been established, further projects could be made available in addition to this current requirement.

  15. Drawings count: 6

    Fabrication-General Fabrication (over 1 tonne)

    Quotes are currently sought on the attached agricultural components which are to be fabricated from mild steel. Outsourcing £10,000 worth of fabrication work each year, the buyer has advised that this will be an ongoing requirement; with orders placed every 3 months. These components will need to fit together without any remanufacture, so testing the fit, is of utmost important.

  16. Drawings count: 1

    Machining-Turning, Low Volume

    Outsourcing over £50,000 worth of machining work every year, this company is a specialist within the manufacture of equipment for the agriculture and horticulture industries. They are currently seeking the assistance of a supplier who is able to produce two different pins and an accompanying flywheel adaptor from various grades of steel, with an emphasis placed on good value and accuracy. These are new designs, for which a supplier has not yet been allocated and subsequently, the successful vendor may also be given the opportunity to diversify into additional requirements once a relationship has been established.

  17. Drawings count: 1

    Profiling-Laser Cutting

    This company operates within the agriculture sector and seeks a supplier who can urgently manufacture a multitude of profiles. Laser cut and folded from mild steel, these parts are required in quantities ranging from 2 off to 10 off. A short lead time is crucial within this project and delivery is ideally required by the 6th September. This will be ongoing work, making this an opportunity to win a new long-term customer as well as the work in question.

  18. Drawings count: 1

    Machining-Gear Cutting

    Gear cutting suppliers are invited to quote for the production of a roller sprocket - an item for which the client is currently low on stock. Destined for end use within horticulture equipment, the sprocket is to be made from steel, with price and lead time indications requested for 10 off. This work is due to be repeated on an annual basis and owing to the client's spend of £50,000 a year in the subcontract machining market, similar opportunities may also be made available. Quotes will be favoured from those who respond promptly and can offer a high quality product within 3-4 weeks of order placement.

  19. Drawings count: 1

    Machining-Turning, Low Volume

    Turning, chamfering and drilling of pins, roller guides and bosses is needed, in order to satisfy a requirement for the agriculture sector. The parts in question will be used within crop spraying equipment and the client has an immediate order to place for their production. A fast turnaround and good value will be seen favourably, with delivery needed as soon as possible. Required quantities range from 1 to 6 off across the set, to be manufactured from various grades of mild steel.

  20. Drawings count: 1

    Profiling-Laser Cutting

    The attached set of laser cut plates are new designs, for which there is no current supplier in place. They are to be profiled from mild steel (with a small amount of bending also involved) and supplied ready for use within a mower deck. It is essential that the chosen supplier is able to offer the designs at good value; in turn, they could be given repeat orders moving forward.

Pages