Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

66 Projects

Displaying 1 - 20 of 66

  1. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This manufacturer of medical supplies and equipment is looking to consolidate their outsourced manufacturing processes. In this instance, they would like to hear from machining suppliers who are capable of manufacturing the complete list of attached turned and milled components. The attached parts make up one set of components and the chosen supplier will be afforded the opportunity to quote for the manufacture of six additional sets of components once a relationship has been established. There is an immediate order to place for this enquiry, with repeat orders approximately every 2-4 months depending on stock levels. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This manufacturer of medical and disability products is currently looking for an alternative sheet metal supplier for the attached cistern bracket lid. There is an immediate order to place for this enquiry, which is to be ongoing work to the the tune of approximately 2000 units per year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 2

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This medical research and development company is looking for a sheet metal supplier to assist with the complete manufacture of the attached RFI screening equipment. This is to include assistance with deciding the best material and thickness, as well as the immediate and ongoing manufacture of the attached units. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 1

    Machining-Machining, Plastics

    This scientific apparatus company has a current requirement for the manufacture of a small terminal insulator from black Ertylite PETP plastic. They are looking to work with a supplier who can offer streamlined lead times, with price also being important. The company in question spends over £20,000 per year on all outsourced machining, facilitating an opportunity to work alongside them on similar requirements moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 2

    Machining-Turning, Medium Volume

    Machining of stainless steel clamp spacers is required, by a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. The parts are to be made in accordance with the drawings provided. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, as well as a reliable delivery within 6/8 weeks, as their current production is dependent on the arrival of these parts. There will be an order to place immediately with the chosen vendor. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 2

    Machining-Milling, Medium Volume

    Machining of stainless steel manifolds is required, by a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. The parts are to be made in accordance with the drawings provided. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, as well as a reliable delivery time within 6/8 weeks, as their current production is dependent on the arrival of these parts. There will be an order to place immediately with the chosen vendor. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This new buyer to Qimtek specialises in the manufacture of laboratory instruments. They currently seek a new supplier for the attached aluminium parts. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, competitive pricing, as well as a reliable delivery time of 6/8 weeks. There will be an order to place shortly with the chosen vendor, once production requirements have reached fruition. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 4

    Machining-CNC Machining, Medium Volume

    This buyer specialises in manufacturing medical equipment and seeks a new supplier for the attached stainless steel parts. Spending over £200,000 per annum on machining processes, the client has advised that there is an order ready to place for this enquiry. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 1

    Machining-Machining, Plastics

    This Qimtek member, who outsources approximately £10,000 worth of machining each year, is in need of a supplier who can assist with the production of the attached male tube connectors from turned polypropylene. The requirement is for male-to-male tube connectors to join Ø 25mm x 1.5mm wall thickness mild steel tube which they will do in house. The items will be used to create screening for the healthcare sector and need to be in place before the end of the month. The initial batch will be 3200 on a call-off basis, with 3 more batches of 1600 off to follow per week up to a total of 8000 off. At the moment this is for a one-off order, but the client works closely with a supplier of furniture to the healthcare sector and therefore, there may be possible future orders. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  10. Drawings count: 2

    Plastic & Rubber-Plastic Fabrication

    This company operates within the medical appliances & equipment sector and is currently seeking a supplier who can manufacture the attached components in 6mm thick reinforced rubber for conveyor belt cleaning. The buyer will be looking for a low-volume run of 20 off initially, followed by a production run of 200 off if the cost is viable. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities, once quality and reliability have been proven. **Due to the current health climate, We ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  11. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    The attached clip is to be made from stainless steel rod and supplied fully assembled, on behalf of a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. The parts are to be made in accordance with the drawings provided. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, as well as a reliable delivery time of 3/4 weeks. There will be an order to place shortly with the chosen vendor, once production requirements have reached fruition. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 0

    Machining-Gear Cutting

    Gear cutting of 12-teeth cog gears is required, by a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. Due to the simplicity of this project, there are no drawings available, but these are to be ordered on an ongoing basis and therefore, this enquiry is not to be missed by those that are looking to supplement their long-term customer portfolio. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 1

    Full turnkey-Fabrication with Machining

    This manufacturer of medical equipment, who outsources in excess of £1million worth of manufacture each year, is looking for a supplier who can produce the attached structural steel shim. Requirements are to supply cut and tapped if required, with holes drilled. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  14. Drawings count: 1

    Machining-Milling, Medium Volume

    Machining of stainless steel mount blocks is required, by a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. The parts are to be made in accordance with the drawings provided. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, as well as a reliable delivery time within 6/8 weeks, as their current production is dependent on the arrival of these parts. There will be an order to place immediately with the chosen vendor. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 3

    Woodworking-Wood Fabrication

    This company, who manufacture medical and health-beneficial products, are currently seeking a UK manufacturer to take on the production of the wooden frames for their posture chairs. Please note that only the wooden frame is required for quoting purposes. At present, the only available drawings and images are included in this project, however, the client is also happy to provide a sample to the successful supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 3

    Machining-Machining, Plastics

    Machining of polycarbonate parts is required, by a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. The parts are to be made in accordance with the drawings provided. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, as well as a reliable delivery time within 7/10days, as their current production is dependent on the arrival of these parts. There will be an order to place immediately with the chosen vendor.

  17. Drawings count: 4

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This company who are involved in the manufacture of disability access equipment, are seeking suppliers to assist with the production of both the attached components and other, ongoing requirements of a similar nature. There is an immediate order to place for this enquiry, with delivery required by the end of October 2020. The chosen supplier will also be asked to manufacture additional, similar components going forward, once a relationship has been established.

  18. Drawings count: 1

    Additive Manufacturing-Fused Deposition Modeling - FDM

    Production of the attached drip tray is required, to be made from thermoplastic. The client is looking for a cost-effective method of manufacture and therefore, this enquiry is being sent to suppliers with both additive manufacturing and plastic machining capabilities. There is an immediate order to place for this enquiry, which will become ongoing work for the successful supplier.

  19. Drawings count: 6

    Fabrication-Tube Bending & Manipulation

    Suppliers who can assist with the manufacture of the attached dental aerosol guard are sought. The client seeks quotes for 30 off of this design, for which they have an immediate order to place and an estimated yearly requirement moving forward. The successful supplier will be responsible for supplying the design complete, including the glass and safety plastic. Please note that the aerosol guard is to have an adjustable height and a maximum load of 10kgs.

  20. Drawings count: 5

    Full turnkey-Machining with Fabrication

    A supplier is sought to produce the attached telescopic assembly, on behalf of a company that operates within the medical sphere. This is a new design which is to manufactured from stainless steel, with quotes requested for 50 and 100 off assemblies at this time. As well as having an immediate order to place, the buyer has specified that this will be ongoing work for the chosen supplier, making this an excellent opportunity to fill long-term capacity.

Pages