Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

694 Projects

Displaying 1 - 20 of 694

  1. Drawings count: 0

    Electronic / Electrical-Design, Development & Prototyping

    This manufacture of secure storage systems is currently looking to partner up with a supplier who can offer the design and manufacturing of a series of electronic components including, motors, housings and trolleys. The electronic components are used for their in house storage systems and could represent both an immediate on ongoing requirement for the successful supplier.

  2. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    Outsourcing £250,000 worth of fabrication work every year, this company specialises in aluminium glazing solutions. They have an immediate requirement for the attached set of flashings, which are to be made from aluminium in quantities ranging from 1 - 3 off. Delivery is required by the October 11th and therefore quotes are required immediately. This is currently a one off requirement although the chosen supplier may be asked to manufacture additional, similar requirements going forward, once a relationship has been established.

  3. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    Outsourcing £250,000 worth of fabrication work every year, this company specialises in aluminium glazing solutions. They have an immediate requirement for the attached set of flashings, which are to be made from aluminium in quantities ranging from 1 - 3 off. Delivery is required by the October 11th and therefore quotes are required immediately. This is currently a one off requirement although the chosen supplier may be asked to manufacture additional, similar requirements going forward, once a relationship has been established.

  4. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This manufacturer of luxury furniture is in need of quotations from Qimtek suppliers for the attached sets of doors to be manufactured from mild steel. Quotations are sought as soon as possible, as the buyer is quoting for the project as a whole. Although there is no immediate order to place, should the buyer be successful in their tender, the order will follow shortly; the chosen supplier will also be asked to manufacture additional components within the project.

  5. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This designer of luxury furniture would like to hear from suppliers who are interested in manufacturing the attached doors from either brass, or mirror polished stainless steel, as well as having them nickel-plated. Although there is no immediate order to place, once a supplier is found and the design is finalised, the order will follow shortly thereafter. This is currently a one-off requirement, although the buyer is looking to build a relationship with the chosen supplier as they will have similar requirements imminently.

  6. Drawings count: 6

    Machining-CNC Machining, Medium Volume

    Spending approximately £100,000 annually on outsourced machining work, this manufacturer of hydraulic systems requires the attached spigot parts on an urgent basis. This is a part that they will be re-selling and therefore, they anticipate that the requirement will be ongoing. Interested suppliers are asked to make contact with the client as soon as possible to discuss.

  7. Drawings count: 4

    Full turnkey-Fabrication with Machining

    This new Qimtek buyer has an order to place for the attached RHS beams, UC beams and SHS posts which are to be used as part of the construction of a house. These are simple blocks to be profiled or machined from structural steel with no details added, which will be welded on-site during construction of the house. Quotes are sought for between 1 and 12 off of each part, and the buyer has also asked that an additional 150mm is to be added to each length measurement when quoting, as the exact length is still to be confirmed for these designs. The correct lengths will be confirmed prior to placing the order, which will be placed shortly. Once a supplier is found, this may also lead to ongoing work.

  8. Drawings count: 1

    Sheet Metal Forming-Heavy Sheet Metal (6mm+)

    This buyer seeks quotes for free-issue stainless steel flats to be twisted 180° in accordance with their specifications. The twisted flats will be used within a staircase banister rail. Ideally, the client would like the flats to be twisted cold in order to preserve the surface finish; however, heat can be used to aid the twisting process if necessary. The client will supply the flats cut to size and polished, with quotes required for 4 off of each of the four lengths. There is an immediate order to place for this enquiry and therefore, interested suppliers are asked to make contact with the buyer at their earliest opportunity.

  9. Drawings count: 1

    Fabrication-General Fabrication (over 1 tonne)

    Spending over £100,000 a year on subcontract fabrication services, this company operates within the construction industry. They are looking to partner with a Qimtek supplier for production of the attached acoustic enclosure. There is an immediate order to place for this enquiry, making it a good fit for suppliers who have imminent capacity.

  10. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This entry system and door manufacturer is interested in hearing from potential suppliers for the ongoing production of the attached wall plate. Spending approximately £100,000 each year on outsourced fabrication, the buyer has advised that this is a new part which is expected to to be repeated 2-3 times per year going forward.

  11. Drawings count: 2

    Full turnkey-Fabrication with Machining

    This London-based construction company is looking for potential suppliers of the attached clamp design. With an immediate order to place, the buyer has expressed that this will be an ongoing requirement, starting with a sample batch and then ongoing, with quantities expected to increase going forward. Therefore, the chosen supplier will win a new long-term customer, as well as the work in question.

  12. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    A new buyer who specialises in the building industry seeks a new supplier to manufacture the attached shop displays. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  13. Drawings count: 3

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This new buyer to Qimtek specialises in construction cladding. They seek a new supplier for production of the attached containers. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  14. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This Qimtek member has an order to place for the attached design, which will be used as part of a lock within the construction industry. Parts are to be manufactured from bright mild steel bar, with quotes sought for 4, 10, 20, 50 and 100 off. The ideal supplier will be able to produce these parts economically and provide a high-quality end product. Once a relationship has been established, further projects could be made available in addition to this initial requirement.

  15. Drawings count: 1

    Fabrication-Pipework

    Suppliers with immediate capacity are sought in order to undertake production of the attached design. The client - a company who operates within the construction sector and outsources £100,000 worth of fabrication work every year - has an urgent order to place and therefore requests prompt responses from interested suppliers. Please note that delivery is required within 1-2 weeks of order placement.

  16. Drawings count: 1

    Fabrication-General Fabrication (over 1 tonne)

    Spending over £100,000 a year on subcontract fabrication services, this company operates within the construction industry. They are looking to partner with a Qimtek supplier for production of the attached acoustic roof bend, with quotes sought for 4 off at this time. The client has an immediate order to place for this enquiry and requires delivery within 2-3 weeks of order placement. Those with the capacity and the capabilities to assist are asked to make contact with the buyer directly to discuss.

  17. Drawings count: 2

    Fabrication-General Fabrication (over 1 tonne)

    This new Qimtek buyer has an immediate order to place for the attached design of shop fitting cage, to be made from mild steel and powder coated. Quotes are sought for 50 off, with good opportunity for further work in future. Companies local to Worcestershire would be preferred due to shipping however, this is not essential. These cages are designed to be fixed onto a standard size pallet and have been adapted to allow the cage to sit on the pallet without moving. See the attached example cage visual for details. Delivery on time and quality is most important. Because this is an urgent requirement, should a suitable quote arrive early, this project may be awarded quickly.

  18. Drawings count: 0

    Plastic & Rubber-Vacuum Forming

    This client, a manufacturer of vaults and security systems, currently seeks the assistance of a supplier with vacuum forming capabilities. There are currently no drawings available however the project in question is for a large component approx. 1.3 m x 1.1 m x 14cm.

  19. Drawings count: 5

    Fabrication-Light Fabrication (under a tonne)

    This client, a designer of bespoke interiors, currently seeks a supplier with the capabilities to produce the attached mild steel bed frames. These frames are usually supplied on a large scale to premises such as student accommodation, hotels, hostels etc and therefore there is an opportunity to produce these designs on an ongoing basis.

  20. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    A range of channels, angles and plates are immediately sought for manufacture, on behalf of a £250,000-spending buyer that operates within the construction industry. The ideal supplier will be able to fabricate and anodise these parts to a high standard of quality. With an immediate order to place for the chosen supplier, this is currently a one-off requirement, although the buyer is in need of additional suppliers for this kind of manufacturing; therefore the chosen supplier will be asked to manufacture additional, similar components going forward.

Pages