Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

107 Projects

Displaying 1 - 20 of 107

  1. Drawings count: 3

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This washroom manufacturer seeks quotes for the attached sheet metal parts in variety of price breaks, ranging from 100 to 500 off. These designs are to be made from stainless steel AISI 304 and will be required by the client on an ongoing basis moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 3

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    Spending over £2million per year on subcontract fabrication work, this company specialises in the manufacture of office furniture. They are looking for a supplier who can assist with the production of mass cable riser parts, which is to be made from bright mild steel. Quotes are sought in a variety of price breaks, although the client has advised that they have an immediate order to place for 10/25/100 off of this design. In addition, this could become an ongoing requirement for the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    The attached cart fabrication will be used to support heavy sheets of material weighing up to 400kg. This is to be made from aluminium in accordance with the drawing attached. The buyer behind this enquiry has an immediate order to place for 1 off of this design, with scope for further units to be ordered at a later date. Delivery of the initial order is required by 28th May; suppliers with the capacity to assist are asked to make contact with the buyer directly to discuss.

  4. Drawings count: 1

    Machining-Turning, Medium Volume

    This washroom manufacturer seeks quotes for the attached turned component in variety of price breaks, ranging from 100 to 500 off. This part is to be made from stainless steel AISI 304 and will be required by the client on an ongoing basis moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 1

    Machining-Milling, High Volume

    This furniture manufacturer is currently seeking quotes for sizeable quantities of the attached seat buffer, which is to be made from rubber. The client requests price and lead time indications for batches of 2000, 3000 and 4000 off and has an immediate order to place with the supplier that they select. In addition, this will be an ongoing requirement moving forward, providing a great opportunity to fill long-term capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 1

    Machining-CNC Machining, High Volume

    Suppliers are currently sought to machine two different designs of mild steel tube ends, on behalf of a buyer who operates within the furniture industry and outsources over £200,000 worth of engineering work per year. The tubes will be free-issued to the successful supplier, ready for the required machining work to be carried out. The buyer has an immediate order to place for the work in question and has also advised that this will become an ongoing requirement moving forward. Suppliers who are interested in being considered for this enquiry are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This buyer, who spends a massive £8million per year on subcontract fabrication services, is currently seeking quotes and best delivery for the complete manufacture of the attached tube fabrications across the four drawings provided. As well as having an immediate order to place, the buyer may also extend additional projects to the chosen supplier once a relationship has been established. Therefore, this is an opportunity to add a big-spending name to your long-term customer portfolio. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 1

    Woodworking-Wood Fabrication

    This manufacturer of interior products currently seeks a supplier to produce a range of newly-designed wooden handles. They will initially look to order 100 off of each design for testing purposes; however, the client has advised that they will require 1000-3000 off per year if successful. Therefore, this enquiry provides an opportunity to fill both short and long-term capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 2

    Plastic & Rubber-Insert Moulding

    The owner of this beauty company also has two other businesses and is looking to launch a range of manufactured displays to take to market in 2021. This buyer would like to work with the chosen supplier(s) to develop the final drawings and continued manufacture of the attached units. There is an immediate order to place for this enquiry, with initial delivery sought at the supplier's earliest convenience. This will be repeated approximately twice per year moving forward, although the frequency will become clearer once the product is launched. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  10. Drawings count: 1

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This buyer is urgently seeking quotes for the attached shelves. There is an immediate order to place for the work in question and the client is keen to hear from suppliers who can source material and supply as quickly as possible. Please be aware that this project may be awarded early by the buyer is a suitable supplier is found; therefore, interested suppliers are asked to submit their quotation as soon as possible to be considered. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  11. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This manufacturer of kennels is currently looking for additional suppliers to assist with the ongoing production of the attached range of components and assemblies. There is an immediate order to place for most of the components attached, while other parts are stock components required for use within a range of in-house assemblies. These orders will be repeated approximately twice per year moving forward, although the order frequency may vary. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    Spending over £40,000 per year on subcontract fabrication services, this company is currently keen to locate a supplier who can manufacture large quantities of the attached display arm assemblies. The client currently seeks quotes for 3500 and 7000 off of each design, with the order to be progressed in April 2021. Interested suppliers are asked to make contact with the buyer via email in the first instance; in addition, there may be further opportunities available to the successful supplier once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 2

    Profiling-Laser Cutting

    Suppliers are invited to quote for the laser cutting of a sign, to be supplied with built up, gold mirror polish effect letters and logo. The client has an immediate order to place for this enquiry, with delivery required by late January 2021. Therefore, interested suppliers are asked to make contact with the buyer at their earliest convenience to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  14. Drawings count: 1

    Fabrication-General Fabrication (over 1 tonne)

    This manufacturer of children's playgrounds is currently looking for alternative suppliers for the attached galvanised steel feet, which are used in many of their installations. With an immediate order to place for this enquiry, the buyer has indicated that they usually repeat the lower volume order up to five times per year. The chosen supplier may also be asked to manufacture additional, similar components once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 3

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This manufacturer of children's playgrounds is currently looking for alternative suppliers for the attached steel brackets. These can be made from either galvanised steel or stainless steel. With an immediate order to place for this enquiry, the buyer has indicated that the work is to be repeated in similar quantities approximately every 6 months. The chosen supplier may also be asked to manufacture additional, similar items moving forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 2

    Profiling-Laser cutting, tube

    Spending over £2million per year on subcontract fabrication work, this company specialises in the manufacture of office furniture. They are looking for a supplier who can assist with the production of the attached rail, which is to be made from bright mild steel. Quotes are sought in a variety of price breaks, and the client has advised that they have an immediate order to place for this design. In addition, this could become an ongoing requirement for the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  17. Drawings count: 1

    Woodworking-Wood Fabrication

    Outsourcing £20,000 worth of fabrication work every year, this company is currently seeking an external supplier to assist with the production of a new design of wooden bench. The client requires quotes for 1 off at this time, although interested suppliers are asked to note that similar work is outsourced multiple times per year. There is an immediate order to place for this enquiry, facilitating an excellent opportunity to fill current capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  18. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    A metal fabricator is needed, on behalf of a company that specialises in the manufacture of furniture and spends over £50,000 a year on subcontract fabrication. They currently require quotes for the attached legs and top/bottom rails, which are to be made from mild steel plate and box section. Interested suppliers are asked to quote their best price and delivery in order to be considered for this opportunity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  19. Drawings count: 2

    Machining-Turning, High Volume

    Suppliers with turning capacity are asked to make contact with this buyer - a designer and manufacturer of furniture, with a £50,000 annual spend on subcontract machining services. They have a current requirement for mild steel spacers which are sought in quantities of 500 off. These are to be turned from mild steel, ready for the client to carry out in-house anodising. Interested suppliers are asked to quote their best price and delivery in order to be considered for the opportunity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  20. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This washroom manufacturer seeks quotes for the attached tap body in a variety of price breaks, ranging from 50 to 200 off. This design is to be made from stainless steel tube and will be required by the client on an ongoing basis moving forward. Those who would like to be considered for this opportunity are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

Pages