Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

95 Projects

Displaying 1 - 20 of 95

  1. Drawings count: 4

    Machining-CNC Machining, Medium Volume

    This manufacturer of windows and doors is looking for machining suppliers who can manufacture a range of lock cylinders which are to be fitted to their installations. The parts in question are to be made from a combination of brass and stainless steel. There are no technical drawings available for these parts at present; however, the client is keen to establish contact with those who can assist. This new range of lock cylinders is to replace all of their existing cylinders in their windows and doors going forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  2. Drawings count: 1

    Profiling-Laser Cutting

    This manufacturer of industrial and agricultural machinery seeks a supplier to assist in the production of the attached components. There is an immediate order to place for this one off enquiry, with the possibility of additional similar work made available to the successful supplier.

  3. Drawings count: 1

    Machining-Milling, Low Volume

    Production of a water cooling block is needed, with delivery required 3-4 weeks from order placement. The client seeks quotes for 1 off of this design, which could lead to additional work for the chosen supplier once a relationship has been established. The water cooling block is to be made from brass in accordance with the drawings attached. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  4. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer is seeking a simple CNC routing procedure to cut a 6mm wide groove in two brass discs. The buyer can supply the material, or if the cost is good enough, they are happy to have the material supplied. The required material is ¼’’ brass sheet, 500mm in diameter, in a free cutting grade to help with cutting time. The final art work will vary, but the client is keen to assess initial costs from this example to see if the work is feasible. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  5. Drawings count: 1

    Machining-Turning, High Volume

    Quotes required for the turning of the attached nickel and gold plated pins, used within the electronics industry. Material: BRASS 36000 1/2 HT

  6. Drawings count: 6

    Machining-Turning, Medium Volume

    With an annual outsource spend of over £50,000 on bespoke machining work, this regular buyer to Qimtek has an order to place for these Stainless steel and Brass parts.

  7. Drawings count: 1

    Fabrication-General Fabrication (over 1 tonne)

    This new Qimtek buyer, an award winning design studio, currently seeks a supplier to assist with the fabrication of the attached pair of brass table legs. These are a new design for which their is no current supplier, should the design prove successful there could be an order to place with additional work to follow for the successful supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  8. Drawings count: 2

    Machining-CNC Machining, High Volume

    VENTILATOR PARTS- URGENT REQUEST FOR QUOTES: This Buyer is urgently looking for quotes on the attached list of parts. The list of parts and the quantities for each make up 1 set. They require a quote for 50 sets urgently to be delivered and prices for 1000 sets. Quotes are required no later than today as they are looking to move forward asap.

  9. Drawings count: 1

    Machining-Thread Cutting

    This company has an immediate order to place to thread the attached brass rod on both ends. Quotes are sought for 1300 rods, which will be free-issued. Threading is the only requirement for this enquiry. Quality and accuracy of the thread is particularly important, as is on-time delivery. Because this is an urgent requirement for their client, should a suitable quote arrive quickly, the work will be awarded early. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  10. Drawings count: 2

    Machining-Turning, High Volume

    This client, who operates within the electronics industry, seeks a supplier to manufacture the attached turned components. These are to be machined from brass and require turning, drilling and threading in accordance with the drawings provided. There is an immediate order to place with the chosen supplier, which could lead to additional work once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  11. Drawings count: 6

    Machining-CNC Machining, Low Volume

    This cryogenics research facility, who outsources approximately £50,000 worth of machining each year, is in need of a supplier who can assist with the immediate production of the attached range of assemblies which are required urgently. These components are to be used within their research equipment. Owing to the nature of this enquiry it is a one-off requirement with an immediate order to place; however, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  12. Drawings count: 8

    Machining-CNC Machining, Low Volume

    This cryogenics research facility, who outsources approximately £50,000 worth of machining each year, is in need of a supplier who can assist with the immediate production of the attached turned, milled, and knurled components for use within their research. Owing to the nature of this enquiry it is a one-off requirement with an immediate order to place; however, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  13. Drawings count: 3

    Machining-Turning, Low Volume

    Outsourcing approximately £50,000 worth of machining each year, this cryogenics research facility is in need of a supplier who can assist with the immediate production of the attached turned and knurled components for use within their research equipment. The client has advised that owing to the nature of this enquiry, there is an immediate order to place and this is a one-off requirement; however, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  14. Drawings count: 5

    Machining-Milling, Low Volume

    This window manufacturer, who currently outsources approximately £100,000 worth of machining per year, has a design for a new product line and requires the assistance of a machining supplier who can manufacture the attached milled components. There is an immediate order to place for this enquiry, with delivery sought at the supplier's earliest convenience. This is to be repeated going forward in increasing quantities, although being a new product, the frequency is not yet known.

  15. Drawings count: 6

    Machining-Turning, High Volume

    Outsourcing machining work to the tune of £30,000 each year, this company is currently seeking suppliers who can manufacture the attached range of turned parts. These parts are in development and are to be used within the electronics sector. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss. There is an immediate order to place, with delivery required at the supplier's earliest convenience. This is currently a one-off requirement, although it could be repeated if successful.

  16. Drawings count: 3

    Machining-CNC Machining, Low Volume

    This manufacturer of bespoke cryogenic equipment is currently experiencing manufacturing and delivery setbacks with their current supply chain in China and would like to hear from UK manufacturers who can assist. The client seeks quotes for three different packages of machined parts, which are to be made from a multitude of metal materials. There is an immediate order to place for this enquiry, with delivery required at the supplier's earliest convenience. This is a one-off requirement, although the chosen supplier may be asked to manufacture additional, similar components going forward.

  17. Drawings count: 1

    Machining-Machining, Prototyping

    This client, a provider of box-making courses and manufacturer of high quality boxes, is currently seeking a supplier to produce some highly cost-effective prototypes of the attached lock and key, which will then develop into an ongoing requirement moving forward. These are to be made from brass; however, the client would also be interested in options for stainless steel variants. The ideal candidate will be able to produce the items in a cost-effective manner whilst also providing a high quality product.

  18. Drawings count: 6

    Machining-Turning, Low Volume

    This cryogenics research facility, who outsources approximately £50,000 worth of machining each year, is in need of a supplier who can assist with the immediate production of the attached components to be used within their research equipment. The client has advised that there is an immediate order to place for this enquiry and although this is a one-off requirement, the chosen supplier will be asked to quote for additional, similar enquiries going forward.

  19. Drawings count: 4

    Sheet Metal Forming-Metal Spinning

    This design house, who generally completes their own fabrication in-house, is currently in need of a supplier who can assist with the spinning required to produce the attached pot-plant inserts. These are part of a new product range that the client is assessing the feasibility of, meaning that there is no immediate order to place. Should this prove successful, an order will follow to be repeated in line with stock requirements, estimated to occur approximately twice per year in similar quantities.

  20. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This is an unmissable opportunity to work with a global manufacturer of heavy vehicles and construction equipment that spends over £50,000,000 a year on subcontract machining services. They are looking to partner with a high quality supplier, who will join their PSL to assist with a number of ongoing machining projects on their behalf. The attached drawing is an example of the work required; interested suppliers are asked to quote for 80 off per year, with scope to produce similar components once a relationship has been established. This enquiry presents a unique opportunity to add a well-recognised brand to your long-term customer portfolio, as well as to fill ongoing capacity with a variety of interesting production projects.

Pages