Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

1451 Projects

Displaying 1 - 20 of 1451

  1. Drawings count: 1

    Machining-Turning, Low Volume

    This Qimtek member currently has a requirement for the attached shaft to be turned from mild steel. They require quotes for 5, 10 and 20 off of these parts, which could develop into an ongoing requirement moving forward. There is an immediate order to place with the successful supplier, meaning that this project will be a great fit with those who have immediate capacity to fill.

  2. Drawings count: 2

    Machining-CNC Machining, Low Volume

    This buyer - a company that spends in excess of £50,000 a year on subcontract machining services - seeks immediate quotes for the attached set of components. The parts in question are destined for use within the oil/chemical/energy industry and are required in batches of 8 off of each design. There is an immediate order to be placed for this enquiry, with similar work available for the successful supplier moving forward.

  3. Drawings count: 3

    Machining-Turning, Low Volume

    This buyer - a manufacturer of induction melting equipment who spends in excess of £50,000 a year in the subcontract machining market - seeks immediate quotes on 3 designs of machined pins. These items are to be made from mild steel and require turning, drilling and tapping. There is an immediate order to place, with similar work available for the successful supplier moving forward.

  4. Drawings count: 2

    Fabrication-General Heavy Fabrication 15mm Plus

    Fabricated tilt beams are required by a company that spends £200,000 a year in the subcontract fabrication market. A supplier is sought with the in-house capabilities needed to produce these items complete to the attached drawings, with a variety of similar work available moving forward. Interested parties are asked to provide their best price and delivery when quoting this project - additional, similar work will also be made available to the successful supplier once this enquiry has been completed .

  5. Drawings count: 1

    Profiling-Laser Cutting

    This manufacturer of heating products, who spends approximately £500,000 a year on subcontract fabrication and associated products, requires the assistance of a profiling company to cut the attached guide rails. With an immediate order to place, this is to be a one-off requirement, although owing to the client's sizeable annual spend, this may lead to additional, similar enquiries for the chosen supplier.

  6. Drawings count: 1

    Profiling-Laser Cutting

    10mm thick mild steel base plates require laser cutting, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer this design at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional, similar projects moving forward.

  7. Drawings count: 7

    Profiling-Water Cutting

    Outsourcing an impressive £350,000 worth of fabrication work each year, this company operates within the retail construction industry. They are looking to work alongside a supplier who can provide a fast turnaround on the attached 5mm & 12mm thick treads, which require cutting and folding. The treads and stringers will be used within sea container feature stairs and form just one of multiple, similar jobs outsourced by the company in question. Therefore, this could pave the way to additional work once a relationship has been established. There will be an order to place once the samples have been approved.

  8. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This shopfitting buyer seeks a supplier who is able to produce the attached U-channel bracket from mild steel. This client spends in excess of £3.7million a year on all outsourced fabrication, making this an excellent opportunity for those looking to add a big-spending name to their customer base. This is part of a larger job the client is tendering for - should they be successful, there will be an immediate order to place with ongoing work to follow.

  9. Drawings count: 5

    Machining-CNC Machining, Medium Volume

    The attached valve bodies, spindles and disks are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products. Quantities of 250 to 500 off will be required annually, making this project ideal for those with long-term capacity.

  10. Drawings count: 1

    Profiling-Laser Cutting

    15mm thick mild steel base plates require laser cutting, etching and countersinking, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer this design at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional, similar projects moving forward.

  11. Drawings count: 1

    Machining-Machining, Large 1m Plus

    This metal spinning company, who spends over £250,000 a year on outsourced machining, currently has an urgent requirement for a supplier who can assist with the machining of slots and countersunk holes into a free-issued base plate. There is an immediate order to place for this urgent requirement, with delivery required early May. Therefore, this an ideal enquiry for companies looking to fill immediate capacity. However, it's worth noting that this company outsources large machining on a weekly basis, meaning that there may be scope for the chosen supplier to assist within additional projects going forward.

  12. Drawings count: 1

    Profiling-Laser Cutting

    A selection of mild steel plates are required, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional, similar projects moving forward.

  13. Drawings count: 1

    Profiling-Laser Cutting

    A selection of mild steel angle cleats are urgently required, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional, similar projects moving forward. Please note that all the welding will be held in house.

  14. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This client spends over £150,000 per year on subcontract fabrication work and is looking for a supplier to make the attached fabricated components, which together will form parts to be used within semiconductor machinery. This enquiry requires several fabrication processes including laser cutting, framework, enclosures, sheet metal forming, box section, welding and assembly, as well as some secondary machining. Quality and price are the most important considerations within this project, which will also lead to repeatable work once the initial order has been tested.

  15. Drawings count: 2

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This manufacturing consultant is looking for quotations on behalf of their client, for the manufacture of the attached tabletops. Although there is no immediate order to place, once the client decides to move forward, the order will follow shortly. This will be a one-off requirement, although it may lead to additional enquiries of a similar nature for the chosen supplier, making this a great opportunity for suppliers looking to fill short-term capacity.

  16. Drawings count: 1

    Profiling-Water Cutting

    Outsourcing an impressive £350,000 worth of fabrication work each year, this company operates within the retail construction industry. They are looking to work alongside a supplier who can provide a fast turnaround on the attached 12mm thick handrail parts, which require cutting and countersinking. This is just one of multiple, similar jobs outsourced by the company in question and could pave the way to additional work once a relationship has been established. There will be an order to place once the samples have been approved.

  17. Drawings count: 1

    Machining-Milling, Low Volume

    This manufacturer of testing equipment currently seeks a supplier to produce a series of milled components. This project involves milling and drilling, with the components to be made from a variety of materials including stainless steel, aluminium and mild steel. The ideal supplier will be able to offer competitive pricing, whilst maintaining steady delivery and lead times.

  18. Drawings count: 1

    Machining-Turning, Low Volume

    This client, a manufacturer of testing equipment, seeks a supplier to produce the turned components attached. This project involves aspects of turning drilling, as well as a small amount of milling, with the components to be made from a variety of materials including stainless steel, aluminium and mild steel. The ideal supplier will be able to offer competitive pricing, whilst maintaining steady delivery and lead times.

  19. Drawings count: 1

    Sheet Metal Forming-Enclosures

    This manufacturer of testing equipment currently has has an immediate order to place for the manufacture and powder coating of the attached enclosure. Outsourcing a sizeable £1million worth of fabrication a year, the client requests quotes urgently with delivery required early May. This is a one-off requirement, but owing to the client's yearly spend, this may lead to additional enquiries for the chosen supplier. Therefore, this an ideal opportunity for suppliers who are looking to fill immediate capacity, with scope to potentially develop the relationship moving forward.

  20. Drawings count: 1

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This client, a manufacturer of electric motors who spends £20,000 a year on outsourced fabrication, seeks a supplier to produce the attached louvre covers. Interested parties are asked to quote for 30 off left hand and 30 right hand units at their earliest convenience. There is an order to place, with potential for ongoing work moving forward.

Pages