Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

1037 Projects

Displaying 1 - 20 of 1037

  1. Drawings count: 1

    Fabrication-General Sheet Metal Under 6mm

    This manufacturer of material handling & storage equipment seeks sheet metal suppliers with the capacity to cut, bend and paint a selection of mild steel and stainless steel mudguards. The client outsources in excess of £1million worth of fabrication work every year; therefore, the successful supplier could secure not only this enquiry, but also a big-spending name to add to their customer base. The buyer would like to work with a supplier who is able to offer repeat supply of these components, making this an excellent opportunity to fill both immediate and ongoing capacity.

  2. Drawings count: 1

    Machining-Milling, High Volume

    This manufacturer of ramps spends a sizeable £100,000 a year on subcontract machining services. They are looking for the attached catch plate to be delivered by the 23rd January 2019 - a design for which there is an immediate order to place for 1000 off. This is a great opportunity for reliable suppliers who can also offer good quality end products, owing to the amount of machining work outsourced.

  3. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached headed pins are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products.

  4. Drawings count: 2

    Machining-Turning, Low Volume

    This client, who operates within the electronics industry, seeks a supplier for the manufacture of a new design of spindle and nut. These are to be machined from a combination of 316 stainless steel and brass and the work will involve aspects of turning, drilling and threading. There is an immediate order to place with the chosen supplier, which could lead to additional work once a relationship is established.

  5. Drawings count: 1

    Fabrication-General Sheet Metal Under 6mm

    Outsourcing fabrication work to the tune of over £30,000 every year, this company is currently seeking a supplier who can manufacture the attached components, which will form part of a modular hose reel assembly. This design will be used as part of a project for the industrial machinery sector and the buyer has an order ready to place for its pre-production. The ideal supplier will be able to produce these parts economically and offer reliable delivery; once a relationship has been established, further projects could be made available in addition to this initial requirement.

  6. Drawings count: 4

    Fabrication-Presswork

    A UK supplier is sought, in order to assist with the pressing and serrating of these Julienne blades. This part is being sourced on behalf of the end client, by the plastics manufacturer who make the rest of the assembly. This order will be a yearly requirement of similar quantities, starting towards the end of 2019; due to the logistics involved, contact from interested parties is sought this side of Christmas 2018.

  7. Drawings count: 2

    Fabrication-Tube Bending & Manipulation

    The attached gas ring and gas feed pipe will be used within a gas delivery system for nitrogen and argon gases and are to be made from stainless steel tube. This project is on behalf of a company that spends over £150,000 per year on bespoke fabrication work. Quotes are required for 1 off of each design and the client has also advised that this will be an ongoing requirement with additional, similar work available going forward, making it an ideal opportunity to fill both short-term and long-term capacity.

  8. Drawings count: 5

    Fabrication-Welding

    This manufacturer of pressure tank protection systems, who outsources in excess of £150,000 worth of fabrication each year, requires the assistance of a supplier who can use fusion welding to weld together mesh discs in various overall sizes. The client will look favourably upon quotes from those who can offer coded welding and requests that interested parties express their interest by 14th December. Once the initial order is complete, the successful vendor can expect to undertake this work on a repeat basis moving forward. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  9. Drawings count: 4

    Fabrication-General Sheet Metal Under 6mm

    Destined for end use within the printing industry, these supports are to be made from stainless steel, on behalf of a company that spends over £500,000 per year on bespoke fabricated designs. Quotes are required for 1 off of each design and the client has also advised that this will lead to repeat orders in future. This makes it an ideal opportunity to fill immediate and long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward, for similar fabrication work.

  10. Drawings count: 2

    Fabrication-General Sheet Metal Under 6mm

    A new buyer to Qimtek seeks a supplier to work alongside on a new project, which calls for the production of stainless steel bins. This project incorporates elements of folding, bending and pressing. The most important supplier criteria for this company are flexibility and reliability, with an emphasis on a high-quality, durable end product. There is an order ready to place with a Qimtek member who can fulfil the above. Although the quantities are of low volume, this will be significant, repetitive work for the successful supplier.

  11. Drawings count: 4

    Machining-Milling, Low Volume

    Outsourcing machining work to the tune of over £200,000 every year, this company is currently seeking a supplier who can machine the attached pair of finger joints using free-issue duplex material. This design will be used as part of a new and major footbridge project in Cornwall and the buyer has an immediate order ready to place for its production. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities of similar work once quality and reliability have been proven.

  12. Drawings count: 3

    Machining-Machining, Prototyping

    This manufacturer of seismic instrumentation, who spends a massive £4 million a year on outsourced machining, is looking for a supplier who can assist with the manufacture of these stainless steel components. Destined for use within pressure vessels, the attached cover, base and body are to be machined in batches of 1 off of each for use as prototypes. Once testing is complete, there is scope for the chosen supplier to be invited to assist within any larger production run that follows.

  13. Drawings count: 1

    Casting-Forging

    This company, a manufacturer of thermal process equipment, seeks a new supplier to manufacture the attached tie bar. This is to be made from 316 bar, which must be flattened at one end and thread cut at the opposite end. There is an immediate order to place for this enquiry, with ongoing batches of 72 off required on a yearly basis. This enquiry is best-suited to those who can offer both quality manufacture and cost-effective pricing.

  14. Drawings count: 1

    Fabrication-General Fabrication 6-15mm

    This automatic assembly manufacturing company, who spend a massive £1,000,000 a year on subcontract fabrication services, requires quotations from possible suppliers for this new design of coolant tank. The client is hoping to place an order for this item within the next month, making this a great opportunity for companies looking to fill capacity at the start of 2019.

  15. Drawings count: 6

    Fabrication-Welding

    Outsourcing fabrication work to the tune of over £90,000 every year, this company is currently seeking a supplier with seam and spot welding capabilities, in order to produce a range of battery containers and external components for end use within the aerospace industry. The overall quality of the components must be extremely high and the buyer will look favourably upon companies that can offer superior end products. Some drawings have been attached to show some of the work required, along with demand history. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  16. Drawings count: 2

    Fabrication-General Sheet Metal Under 6mm

    This company operates within the printing industry and outsources over £500,000 worth of fabrication work every year. They are looking for quotes for a set of plates, brackets, supports and tables which will be used within printing press machinery. This project incorporates elements of cutting, folding, drilling and tapping with quotes required for 1 off set, comprised of batches ranging from 2 off to 30 off parts included within the set. The ideal supplier will be able to produce these parts economically and provide a high-quality end product; once a relationship has been established, further projects could be made available in addition to this ongoing requirement.

  17. Drawings count: 4

    Fabrication-Laser Cutting

    The attached stainless steel components are urgently required by a manufacturer of industrial fan units. The company behind this enquiry has an annual spend of £20,000 on bespoke fabricated parts and seeks assistance with an immediate order, as well as further requirements for these items moving forward. In addition, there may also be scope to venture into other opportunities alongside this project, once delivery and value have been proven.

  18. Drawings count: 6

    Fabrication-General Fabrication 6-15mm

    This buyer seeks a new supplier to assist with the regular production of a range of fabricated frames. This company spends over £300,000 a year on subcontract engineering and seeks a supplier with the capabilities to undertake all aspects of manufacture. This project will involve elements of cutting, folding, assembly and finishing, as well as a small amount of machining. The client is looking to increase their current supply base and as such, the successful supplier will receive ongoing and additional opportunities for work.

  19. Drawings count: 10

    Fabrication-Laser Cutting

    Quotes for the attached profiles are urgently required by a manufacturer of industrial fan units. These are to be manufactured from a mixture of stainless steel and mild steel in a variety of thicknesses. The company behind this enquiry has an annual spend of £20,000 on bespoke fabricated parts and seeks assistance with an immediate order, as well as further requirements for these items moving forward. In addition, there may also be scope to venture into other opportunities alongside this project, once delivery and value have been proven.

  20. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This company operates across many industries and outsources over £40,000 worth of machining work every year. They have an immediate order to place for stainless steel adaptors, which will be used within fuel tanks in tug boats. This project incorporates elements of turning, threading, boring and milling, with quotes required for 50 off. The ideal supplier will be able to produce these parts economically and provide a highly accurate, quality end product. Once a relationship has been established, further projects could be made available in addition to this initial requirement.

Pages