Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

117 Projects

Displaying 1 - 20 of 117

  1. Drawings count: 14

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    Spending in excess of £120,000 per year on subcontract machining and fabrication services, this company specialises in the manufacture of wind turbines. They currently seek a supplier to produce and supply a selection of parts as per the attached drawings. Please note that delivery required by early February 2021. The successful vendor will be required to produce these components on a repeat basis going forward; therefore, this is an opportunity to win a new long-term customer, with a view to placing additional work in future. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 1

    Sheet Metal Forming-Presswork

    This client is currently seeking a supplier to undertake production of an exhaust repair cap, to be used within the repair of motorcycles. They currently seek quotes for 100 off or supplier MOQ and have advised that this will be repeated in line with stock requirements going forward. Those with the capabilities and the capacity to assist are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 1

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This client is currently seeking a supplier to undertake production of an exhaust repair cap, to be used within the repair of motorcycles. They currently seek quotes for 100 off or supplier MOQ and have advised that this will be repeated in line with stock requirements going forward. Those with the capabilities and the capacity to assist are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 2

    Full turnkey-Fabrication with Machining

    Spending in excess of £120,000 per year on subcontract fabrication and machining services, this company specialises in the manufacture of wind turbines. They currently seek a supplier to produce the attached turbine assembly complete to the drawings provided, with delivery required by early March 2021. This is a legacy design for which there is no longer a supplier in place; as such, the successful vendor will be required to produce the turbine on a repeat basis going forward. Therefore, this is an opportunity to win a new long-term customer as well as the work in question. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 1

    Machining-Turning, High Volume

    Price and lead time indications are sought for the attached set of turned bracket mounts, bracket shells, connectors and bosses, on behalf of a company that operates within the automotive industry. They seek quotes for these components as part of a larger job that they're currently tendering for and hoping to progress in the new year. Interested suppliers are asked to quote for the price breaks indicated in the attached spreadsheet, which range from 20 off to 1100 off. In addition, this has scope to become ongoing work for the chosen vendor. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 2

    Machining-Turning, Low Volume

    This buyer, a manufacturer of vacuum excavation equipment, urgently seeks a supplier to produce the attached carbon steel driveshafts in a batch of 10 off at this time. The client spends £100,000 a year on bespoke machined components and requests that interested parties quote their best price and delivery in order to be considered for this opportunity. They are currently looking to improve on supplier reliability and may wish to utilise the successful vendor's services within additional projects, once a relationship has been cultivated. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.** IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to caroline.ogden@qimtek.co.uk or fax 01256 394600, Once received, all drawings and documents will be released to your account.

  7. Drawings count: 3

    Profiling-Laser cutting, tube

    This buyer requires quotes for laser cut tube, which will be used within an autosports application. Having previously had these parts made overseas, the client now wishes to return production to the UK. The buyer is especially keen to speak to suppliers who can offer a fast turnaround on these components, which will be ordered on a repeat basis throughout the year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 1

    Welding-Mig

    Resistance projection welding of a boss (item 3 shown on the attached drawing) to a shell, and threaded studs (item 6 on the attached drawing) onto a 90° bracket is required, by an automotive buyer with a £200,000 annual fabrication spend. They require quotes for 300 off at this time, with the shell to be free-issued to the successful supplier ready for welding. The client has an immediate order to place for this enquiry, making it a great opportunity to fill immediate or imminent capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 2

    Profiling-Laser cutting, tube

    This Qimtek member is looking for a supplier to fulfil this urgent project. They require a total of 268 base tubes and 268 bar tubes to be called off over a six month period, for use within their in-house equipment. Parts to be supplied cut in lengths but not formed and laser cut as per the drawings. There could also be additional opportunity for the successful supplier to quote for the client's other laser tube & box requirements. The first requirement due before 10th November will be for a minimum of 44 lengths of each. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.***

  10. Drawings count: 3

    Machining-Milling, Low Volume

    This buyer requires quotes for milled tube, which will be used within an autosports application. Having previously had these parts made overseas, the client now wishes to return production to the UK. The buyer is especially keen to speak to suppliers who can offer a fast turnaround on these components, which will be ordered on a repeat basis throughout the year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  11. Drawings count: 1

    Machining-CNC Machining, Low Volume

    Countersinking and chamfering of free-issue plates is needed, on behalf of a company that spends over £85,000 a year on subcontract machining services. The parts in question are destined for end use within a truck & transportation application, with quotes required for 36 off at this time. Delivery is required by mid-November, making this a good fit with suppliers who have immediate capacity to fill. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 3

    Fabrication-Light Fabrication (under a tonne)

    This client, a provider of mechanical design services, seeks a supplier to produce the attached fabricated components from a combination of SHS and perspex. There is an immediate order to place, with the possibility for additional work to follow moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This metal spinning manufacturer seeks the assistance of a supplier who can produce the listed parts required for the full assembly of their cranked fork. Full assembly is not required; only manufacture of the piece parts for later assembly in-house. The client has an immediate order to place for the work in question, and this is likely to be repeated going forward, spelling ongoing work for the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  14. Drawings count: 2

    Sheet Metal Forming-Spring Manufacturing

    A supplier is sought to manufacture the attached spring clip, which is to be used within the buyer's range of workshop tools. The buyer has an immediate order to place for this enquiry and this is to be repeated in line with stock requirements, although at this stage, the frequency is not yet known. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 3

    Profiling-Laser cutting, tube

    Suppliers with tube laser cutting are invited to quote for the attached hurdle post and gate post, which are required for use within an agricultural application. The buyer has advised that these are legacy designs, for which there is no supplier in place; therefore, they seek the assistance of a Qimtek member who is able to facilitate production of these posts throughout the year. Owing to the repeat nature of the work, this is an opportunity to win a new long-term supplier as well as the work in question. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 4

    Machining-Turning, Low Volume

    Destined for end use within the agricultural industry, the attached bushes and pins are required by a buyer that spends £50,000 a year on subcontract machining services. They would ideally like to work with a supplier who is situated locally to them and have advised that there is potential for this to become an ongoing requirement. Those that are interested in being considered for the work are asked to make contact with the buyer directly to discuss.

  17. Drawings count: 1

    Machining-Machining, Large 1m Plus

    Destined for end use within the food & beverage industry, the attached shaft is required by a company that places £200,000 into the subcontract fabrication market each year. They are looking to increase their supplier base for these units and seek quotes for 3 off. Those with the capacity available to assist are asked to make contact with the buyer directly to discuss the opportunity.

  18. Drawings count: 2

    Machining-Turning, Medium Volume

    This buyer, a manufacturer of vacuum excavation equipment, urgently seeks a supplier to produce the attached carbon steel shaft keys in a batch of 200 off at this time. The client spends £100,000 a year on bespoke machined components and requests that interested parties quote their best price and delivery in order to be considered for this opportunity. They are currently looking to improve on supplier reliability and may wish to utilise the successful vendor's services within additional projects, once a relationship has been cultivated. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to caroline.ogden@qimtek.co.uk or fax 01256 394600, Once received, all drawings and documents will be released to your account.

  19. Drawings count: 2

    Machining-Turning, Medium Volume

    This company, who operates within the motorsport industry, is seeking price and delivery indications for the spindle shaft detailed in the drawing attached. This is a windscreen wiper for motorsport applications. The buyer is initially looking for a sample part to be made for evaluation and testing, before committing to the final batch of 100 units.

  20. Drawings count: 2

    Machining-Milling, Low Volume

    This client, a manufacturer of bespoke golfing equipment, seeks a supplier to aid in the production of a new design of putter head from carbon steel. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place for the initial 10 off, with the opportunity for both ongoing and additional work moving forward, once the design has been proven.

Pages