Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

3595 Projects

Displaying 41 - 60 of 3595

  1. Drawings count: 1

    Profiling-Laser Cutting

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached set of flashings for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  2. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    Outsourcing approximately £75,000 worth of fabrication work each year, this manufacturer of heat exchangers is in need of suppliers interested in producing the attached lifting loop required in one of the current builds. With an immediate order to place for this one-off requirement, the buyer has advised that due to increased turnover, the chosen supplier will be asked to manufacture additional, similar designs going forward. Please note that assembly is not required for this enquiry. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  3. Drawings count: 1

    Profiling-Laser Cutting

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached set of plates & stiffeners for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  4. Drawings count: 4

    Extrusions-Complete Manufacture & Assembly

    This client, a prestigious global manufacturer of high-end air guns, seeks a extrusion manufacturing partner to quote for a new design of trigger frame. Interested parties are asked to submit their best price and lead time in order to be considered for this opportunity, with quality of manufacture also being of the utmost importance. The ideal supplier will be able to offer fantastic communication, high quality craftsmanship and competitive pricing. In return, the successful candidate could secure ongoing work from the buyer, once the product's design has been proven. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  5. Drawings count: 3

    Casting-Metal Injection Moulding

    This client, a prestigious global manufacturer of high-end air guns, seeks a metal injection moulding partner to quote for a new design of cocking sled. Interested parties are asked to submit their best price and lead time in order to be considered for this opportunity, with quality of manufacture also being of the utmost importance. The ideal supplier will be able to offer fantastic communication, high quality craftsmanship and competitive pricing. In return, the successful candidate could secure ongoing work from the buyer, once the product's design has been proven. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  6. Drawings count: 2

    Machining-Machining, Prototyping

    This client, a prestigious global manufacturer of high-end air guns who spends a massive £800,000 a year on subcontract machining services, seeks a machining partner to produce a selection of prototype components from aluminium and mild steel. Interested parties are asked to submit their best price and lead time in order to be considered for this opportunity, with quality of manufacture also being of the utmost importance. The ideal supplier will be able to offer fantastic communication, high quality craftsmanship and competitive pricing. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  7. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    A set of machined parts is required, by a manufacturer of lifting equipment that spends in excess of £50,000 a year on subcontract machining. They are looking to work with a supplier that has the capacity to produce and deliver these parts by the 30th April. This project could facilitate an opportunity for the supplier to lend their services to future projects from this company, meaning that there is plenty of scope to win not only the job in question, but also a new long-term customer. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  8. Drawings count: 1

    Plastic & Rubber-Vacuum Forming

    This regular buyer to Qimtek has an order to place for this design of electrical pump control box, which is to be manufactured via vacuum forming. Quotes are required for 200 off, with tooling also required. Pricing and delivery are key factors in this enquiry, with scope for further work once this initial requirement is completed. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  9. Drawings count: 1

    Machining-Machining, Plastics

    This company has an annual machining spend of over £50,000 and specialises in the pumps and gauges industry. They have an order to place for this design of ball sealing ring, made from PEEK material. Quotes are sought for 1500 off, and the buyer has added that this will be an ongoing requirement for this quantity every 6 months. A timely delivery is important, as is quality and pricing. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  10. Drawings count: 2

    Additive Manufacturing-Direct Metal Laser Sintering - DMLS

    This client, a manufacturer of eco-friendly automotives that spends over £200,000 a year on outsourced manufacturing services, currently seeks a supplier for the attached push buttons. These are to be made from aluminium and will be used within the testing of electric vehicles. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  11. Drawings count: 1

    Machining-Milling, Low Volume

    A manufacturer of food packaging equipment is looking to hear from suppliers who can manufacture the attached blade. The company in question spends over £3million a year on outsourced machining and as such, the successful supplier would secure not only this project, but also ongoing work from this prestigious buyer. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  12. Drawings count: 1

    Profiling-Laser Cutting

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached set of plates & stiffeners for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  13. Drawings count: 1

    Profiling-Laser Cutting

    This company is looking for a supplier to profile these two pieces from natural Zinc, using 1.5mm and 0.8mm sheet. These will be used as part of oven/stove equipment. Quotes are sought for 1 off sample of each and batches of 100 off of each piece. The buyer has confirmed the initial order with the chosen supplier will be for 1 off of each; however, when production is ready, they will be ordered in batches of 100 off going forward. The frequency of batches is not known at this time. Quality is a key element for this enquiry, along with reliable delivery. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  14. Drawings count: 3

    Machining-CNC Machining, Low Volume

    This manufacturer of gas analysis equipment, who outsources approximately £150,000 worth of machining work each year, is looking to increase their supplier base with additional and alternative UK-based machinists, and would like to hear from interested parties with quotations for the attached sample components. There is an immediate order to place for these parts, with delivery required by April 21st. This will be a one-off requirement, although the chosen supplier will be asked to manufacture additional, similar components going forward, once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  15. Drawings count: 2

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This regular buyer to Qimtek has an outsource spend of over £100,000 per year for bespoke fabricated designs, and is looking for quotes for 2 off sets of this design of hood and panels to be made from 1mm thick stainless steel. Pricing and quality are very important for this enquiry - particularly quality because it will be used within a food environment. Although there is not an order to place right now, it will be placed as soon as the quotes are collated, so the buyer invites quotes to be received as quickly as possible. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  16. Drawings count: 1

    Machining-Thread Cutting

    This company has an immediate order to place to thread the attached brass rod on both ends. Quotes are sought for 1300 rods, which will be free-issued. Threading is the only requirement for this enquiry. Quality and accuracy of the thread is particularly important, as is on-time delivery. Because this is an urgent requirement for their client, should a suitable quote arrive quickly, the work will be awarded early. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  17. Drawings count: 1

    Profiling-Laser Cutting

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut the attached set of plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  18. Drawings count: 1

    Machining-Turning, High Volume

    This client currently seeks a supplier to turn the attached mild steel inner bushes which are destined for use within the automotive sector. As well as having an immediate order to place, the buyer has advised that this will be ongoing work for the chosen supplier, making it an excellent opportunity to expand your long-term customer portfolio. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  19. Drawings count: 1

    Machining-Turning, Low Volume

    This Qimtek member has an immediate order to place for this design of aluminium foot peg, which requires turning, chamfering and knurling processes. Quotes are sought for 50 off at this time. An excellent quality end product and on-time delivery are both critical elements of this enquiry and once the order is complete, this could also lead to similar future work once a relationship is established. Because of the immediate order ready to place, should a suitable quote come in quickly, the work may be awarded early. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  20. Drawings count: 2

    Machining-Machining, Plastics

    This client, a manufacturer of laser and IPL lamps, seeks a supplier to manufacture the attached plastic components. These are to be machined from black PEI and require turning, drilling and countersinking in accordance with the drawings provided. There is an immediate order to place with the chosen supplier, which could lead to additional work once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

Pages