Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

4054 Projects

Displaying 61 - 80 of 4054

  1. Drawings count: 1

    Machining-Turning, Low Volume

    Machining of the attached bronze fly press rest is required by a buyer working in the automotive industry. This project includes aspects of drilling, chamfering and turning, with quotes required for 1 off at this time. There is an immediate order to place and, although this is a one-off order, additional work of a similar ilk will also be made available to the successful supplier.

  2. Drawings count: 5

    Machining-Machining, Large 1m Plus

    This manufacturer of medical equipment, who outsources in excess of £500,000 worth of machining work per year, is looking for a supplier who can machine a set of large aluminium plates. Parts are required by 14/01/2019 and therefore, suppliers able to offer quality manufacture and prompt delivery are eagerly sought.

  3. Drawings count: 3

    Machining-Machining, Plastics

    This manufacture of luxury pens is looking for a supplier who is able to offer production of a selection of plastic pen components, to be made from free-issue acrylic blocks. This will become an ongoing requirement, making it an excellent opportunity for those who are looking to increase their long-term customer portfolio. Additional and alternative components will also be made available to the successful supplier, once quality and reliability have been proven.

  4. Drawings count: 1

    Casting-Forging

    This company, a manufacturer of thermal process equipment, seeks a new supplier to manufacture the attached tie bar. This is to be made from 316 bar, which must be flattened at one end and thread cut at the opposite end. There is an immediate order to place for this enquiry, with ongoing batches of 72 off required on a yearly basis. This enquiry is best-suited to those who can offer both quality manufacture and cost-effective pricing.

  5. Drawings count: 2

    Fabrication-General Sheet Metal Under 6mm

    This company operates within the consumer products industry and outsources over £500,000 worth of fabrication work every year. They have an order to place for a new shelf design to be used within one of their existing storage products. This project incorporates elements of fabrication and powder coating, with quotes required for 1 off and 50 off. The ideal supplier will be able to produce these parts economically and once a relationship has been established, further orders of 50 off, with repeatable batches, could be made available in addition to this initial requirement. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  6. Drawings count: 1

    Fabrication-General Fabrication 6-15mm

    This automatic assembly manufacturing company, who spend a massive £1,000,000 a year on subcontract fabrication services, requires quotations from possible suppliers for this new design of coolant tank. The client is hoping to place an order for this item within the next month, making this a great opportunity for companies looking to fill capacity at the start of 2019.

  7. Drawings count: 6

    Fabrication-Welding

    Outsourcing fabrication work to the tune of over £90,000 every year, this company is currently seeking a supplier with seam and spot welding capabilities, in order to produce a range of battery containers and external components for end use within the aerospace industry. The overall quality of the components must be extremely high and the buyer will look favourably upon companies that can offer superior end products. Some drawings have been attached to show some of the work required, along with demand history. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  8. Drawings count: 4

    Woodworking-Wood Fabrication

    These kitchenware handles are to be made from wood - the suggested wood material to be used is lime, oak or beech; however, the client is open to suggestions should a better alternative be put forward. Quotes are required for 500 off of each half and the client has also advised that this may lead to an ongoing requirement depending on initial sales of this first batch. Therefore, it may be an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  9. Drawings count: 4

    Machining-Turning, Low Volume

    With a £50,000 annual spend across all subcontract machining services, this manufacturer of industrial machinery is looking for assistance with the attached pulley rods. They require quotes for batches ranging from 30 off to 40 off, for which there is an immediate order to place. These are new designs with no current supplier and the successful vendor will be given repeat orders moving forward. A fast turnaround and reliable delivery are especially important to this buyer - once this has been proven, there is scope for the relationship to be developed further.

  10. Drawings count: 2

    Machining-Machining, Large 1m Plus

    This client - a company that spends in excess of £4.5million a year on subcontract machining services - is looking to partner with a Qimtek member that can assist with the complete manufacture of the attached mandrel assemblies. This project incorporates aspects of milling, drilling and turning - please note that a small amount of fabrication may also be required. Due to the large size of some of the associated components, this project is best-suited to suppliers with overhead lifting equipment. Owing to the client's large spend, the successful supplier will secure not only the work in question, but also a long-term customer with an abundance of machining requirements.

  11. Drawings count: 3

    Machining-Turning, Low Volume

    Outsourcing machining work to the tune of £20,000 every year, this company is currently seeking a supplier who can manufacture the attached spigots for the automotive industry. The buyer has an order ready to place for their production. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  12. Drawings count: 1

    Machining-CNC Machining, Low Volume

    Outsourcing machining work to the tune of £50,000 every year, this company is currently seeking a supplier who can manufacture the attached bearing casing. This design will be used as part of a project for the autosports sector and the buyer is looking for the most economical method of manufacture, leading to the production of many other components of a similar nature. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  13. Drawings count: 1

    Plastic & Rubber-Plastic Fabrication

    This startup lighting manufacturer would like to hear from possible suppliers who can assist with the production of opal acrylic rings, to be used as light covers. An initial sample will be required, which - after testing - will be followed by larger order quantities in various sizes. Therefore, this is a good opportunity for companies looking to fill both immediate and long-term capacity.

  14. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer, a manufacturer of British sports cars, seeks the assistance of a supplier with the capabilities to mill, drill, turn, tap and chamfer the attached aluminium mirror stem. Quotes are required for a batch of 50 off at this time. Owing to the buyer's impressive £500,000 annual machining spend, the chosen supplier will be given the opportunity to develop an ongoing relationship and assist within further machining projects moving forward.

  15. Drawings count: 1

    Fabrication-General Fabrication 6-15mm

    This company operates within the printing industry and outsources over £500,000 worth of fabrication work every year. They are looking for quotes for 2 off cooling conveyor support frames which will be used within printing press machinery. The ideal supplier will be able to produce these parts economically and provide a high-quality end product; once a relationship has been established, further projects could be made available in addition to this ongoing requirement.

  16. Drawings count: 2

    Fabrication-General Sheet Metal Under 6mm

    This company operates within the printing industry and outsources over £500,000 worth of fabrication work every year. They are looking for quotes for a set of plates, brackets, supports and tables which will be used within printing press machinery. This project incorporates elements of cutting, folding, drilling and tapping with quotes required for 1 off set, comprised of batches ranging from 2 off to 30 off parts included within the set. The ideal supplier will be able to produce these parts economically and provide a high-quality end product; once a relationship has been established, further projects could be made available in addition to this ongoing requirement.

  17. Drawings count: 4

    Fabrication-Laser Cutting

    The attached stainless steel components are urgently required by a manufacturer of industrial fan units. The company behind this enquiry has an annual spend of £20,000 on bespoke fabricated parts and seeks assistance with an immediate order, as well as further requirements for these items moving forward. In addition, there may also be scope to venture into other opportunities alongside this project, once delivery and value have been proven.

  18. Drawings count: 3

    Fabrication-General Sheet Metal Under 6mm

    Sheet metal suppliers with the capability to cut, bend, fold and weld are sought, on behalf of a manufacturer of forklift trucks. Interested parties are asked to quote for the production of a selection of mild steel door and side panels, which will also require painting. The client outsources £1million worth of fabrication work every year, meaning the successful supplier will be given an opportunity to add a big-spending name to their customer base. This will become ongoing work for the successful supplier, making it ideally suited to those who are looking to fill long-term capacity. Good value and quality are essential elements of this project, for which there is an immediate order to place.

  19. Drawings count: 3

    Fabrication-General Sheet Metal Under 6mm

    This startup lighting manufacturer would like to hear from possible suppliers who are able to produce the attached ring. This design will be used to hold LED lights. A sample is sought initially - once testing is complete, this will lead to larger orders to be repeated on an ongoing basis. Therefore, this is an excellent opportunity to fill both short-term and long-term capacity.

  20. Drawings count: 6

    Fabrication-General Fabrication 6-15mm

    This buyer seeks a new supplier to assist with the regular production of a range of fabricated frames. This company spends over £300,000 a year on subcontract engineering and seeks a supplier with the capabilities to undertake all aspects of manufacture. This project will involve elements of cutting, folding, assembly and finishing, as well as a small amount of machining. The client is looking to increase their current supply base and as such, the successful supplier will receive ongoing and additional opportunities for work.

Pages