Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

3942 Projects

Displaying 101 - 120 of 3942

  1. Drawings count: 2

    Plastic & Rubber-Injection Moulding

    This manufacturer of children's bicycles currently has a gap in their production plan whilst awaiting capacity from their regular supplier. Therefore, they are in need of a temporary supplier to assist with the injection moulding of rubber inserts. Tooling will be required, although supplier input for the best method is welcomed. Although this is a temporary requirement with two runs expected, this may lead to future enquiries for the chosen supplier once a relationship has been established.

  2. Drawings count: 1

    Profiling-Laser Cutting

    3mm & 5mm thick mild steel cap plates are required, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional, similar projects moving forward.

  3. Drawings count: 1

    Profiling-Laser Cutting

    15mm thick mild steel base plates require laser etching and countersinking, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer this design at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional, similar projects moving forward.

  4. Drawings count: 5

    Fabrication-Light Fabrication (under a tonne)

    This oven cleaning company is looking to expand their business and introduce a range of "Oven Dip Tanks" to their portfolio .Therefore they would like to hear from suppliers who can assist with the manufacture of the attached fabricated and welded stainless steel parts. As the buyer is hoping to go to market by Summer 2019, there is an immediate order to place which will be ongoing on a monthly basis.

  5. Drawings count: 9

    Fabrication-Light Fabrication (under a tonne)

    With an outsource spend of over £90,000 per year on fabrication work, this client is looking for a new supplier who is able to fabricate the attached containers and brackets. Processes required for this work include sheet metal forming, seam welding and spot welding. Their previous supplier has gone into administration, making this an excellent opportunity for a new supplier to take over production and manufacture items for the aerospace industry. The successful supplier will also be invited to tender for additional opportunities moving forward.

  6. Drawings count: 4

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This client is looking for a new supplier to manufacture the attached plates and brackets, these must then be spot welded to free-issue containers. Quotes are required for between 100 off to 560 off annually for each drawing as shown in the batches required. These will be required in varying batches regularly throughout the year. This is a great opportunity to secure a new client for regular work within the aerospace industry.

  7. Drawings count: 1

    Sheet Metal Forming-Roll Bending

    With an annual fabrication spend in excess of £90,000, this client is looking for a new supplier to manufacture the attached stainless steel container tubes which require rolling and welding . Quotes are required for 85 off annually, which will be ordered in call offs regularly throughout the year.

  8. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    Outsourcing an impressive £350,000 worth of fabrication work each year, this company operates within the retail construction industry. They are looking to work alongside a supplier that can provide a fast turnaround on the attached 5mm thick brackets which require cutting and folding. This is just one of multiple, similar jobs outsourced by the company in question and could pave the way to additional work once a relationship has been established.

  9. Drawings count: 1

    Profiling-Laser Cutting

    10mm thick mild steel plates are required, on behalf of a company that specialises in the manufacture of steel products for the retail industry. They would like to hear from companies that are able to offer this design at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier for additional similar moving forward.

  10. Drawings count: 2

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This manufacturer of cable connectors, who outsources approximately £50,000 worth of fabrication each year, is currently seeking a supplier who can assist with the manufacture of the attached brass ring terminal and two-way contact. These are newly designed components for which pre-production quotations are currently sought.The client would also be interested in receiving prices for the ongoing forecast quantities. There is an immediate order to place for these parts, with orders expected on a yearly basis. The annual quantity for these items is expected to increase to 43,500 units per year following the initial order.

  11. Drawings count: 1

    Profiling-Laser Cutting

    This client is looking for a supplier to produce the attached components which when assembled, will form parts of a hose lock caddy. Two of the three parts are to be laser cut, with the third part being cut and folded. This is a new design with quotes required for 20 off for each part, there will be additional opportunities for repeatable work after the initial order.

  12. Drawings count: 1

    Profiling-Laser Cutting

    10mm thick mild steel bracing lugs are urgently required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer this design at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements that are similar in nature.

  13. Drawings count: 2

    Fabrication-General Fabrication (over 1 tonne)

    This client is looking for a new supplier to provide quotes for the manufacture of 3 off stainless steel vessel plinth frames. This work calls for the welding of box section and sheet metal with additional machining and grinding work also required. Quotes are required for 3 off, which can be delivered one at a time if this is more suitable, with all three being delivered within 8 weeks of placing the order. The order is due to be placed in mid-April so will suit those with up-coming or current capacity. This will also lead to repeatable orders once the quality and reliability is proven. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  14. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    This buyer, a provider of shopfitting solutions who spends £3.7million a year on outsourced fabrication, seeks partnership with a supplier who is able to manufacture the attached Gondola back panel, tiebar and end panel. Some components may be sourced off-the-shelf in order to make up the bespoke assemblies - please ensure you review the drawings in-depth before quoting. This work involves aspects of cutting, bending and welding.

  15. Drawings count: 2

    Profiling-Water Cutting

    This shopfitting buyer seeks a supplier who is able to water cut the attached toughened glass shelf.This client spends in excess of £4.7 million a year on all outsourced manufacture, making this an excellent opportunity for those looking to add a high spending profile to the customer base. This is part of a larger job the client is tendering for, should they be successful there will be an immediate order to place with ongoing work to follow.

  16. Drawings count: 1

    Machining-Turning, Low Volume

    This client, a manufacturer of safety products for the automotive sector, seeks a supplier to produce the attached items from EN3B mild steel. This project incorporates elements of turning, milling and drilling. Interested companies are asked to make contact at their earliest convenience, as the buyer has an immediate order to place for this work. There is potential for this to become an ongoing requirement, making it an opportunity to fill both short and long-term capacity

  17. Drawings count: 1

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    A manufacturer of material test equipment, who spends a respectable £250,000 per year on outsourced fabrication services, would like to hear from suppliers capable of producing the attached foot pedal shroud from 1.5mm thick mild steel. This project will involve elements of cutting, folding and welding. The ongoing nature of the work means that the successful supplier will win not only the job in question, but also a new long-term customer. They have an immediate order to place, as well as an ongoing need for these components.

  18. Drawings count: 1

    Machining-Turning, Low Volume

    Machining of the attached mild steel "gauges" is required by a buyer working in the automotive industry. This project calls for turning and chamfering of EN3b mild steel bars with quotes required for 2 off at this time. There is an immediate order to place for this enquiry with additional work of a similar ilk will also be made available to the successful supplier.

  19. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This company, who specialises in the manufacture of automotive products, currently seeks a supplier to produce attached outer sleeve from free issue E355 tube.This item requires reaming in order to attain an internal diameter of 32mm and milling/ saw cutting on order to creat a "slashed" end Interested companies are asked to make contact at their earliest convenience, as the buyer has an immediate order to place for this work. There is potential for this to become an ongoing requirement, making it an opportunity to fill both short and long-term capacity.

  20. Drawings count: 1

    Profiling-Laser Cutting

    10mm thick mild steel end plates are required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer this design at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier for additional similar moving forward.

Pages