Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

4053 Projects

Displaying 121 - 140 of 4053

  1. Drawings count: 1

    Fabrication-General Sheet Metal Under 6mm

    Outsourcing fabrication work to the tune of £30k every year, this company is currently seeking a supplier who can manufacture the attached components which will form part of a modular hose reel assembly. This design will be used as part of a project for the industrial machinery sector and the buyer has an order ready to place for its pre-production. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  2. Drawings count: 2

    Fabrication-General Sheet Metal Under 6mm

    This manufacturer of environmental equipment, who spend in excess of £250,000 a year on fabrication, require a new supplier who can assist with the ongoing production of the attached Clip and Bracket components. These are to be manufactured from mild steel with aspects of cutting,bending and a small amount of machining required. There is an immediate order to place with ongoing batches to follow, making this an ideal project for suppliers looking to fill both immediate and long term capacity.

  3. Drawings count: 2

    Machining-Machining, Plastics

    This £50,000-spending company, working within the industrial machinery sector, seeks a new supplier to undertake machining of the attached flange tube assemblies.They are looking for a supplier whom they can build a long-term relationship with making this an excellent opportunity for those looking to fill ongoing capacity. It is essential that interested parties are able to offer good value whilst still maintaining a high quality product.

  4. Drawings count: 8

    Electronic / Electrical-Electromechanical Assembly

    This manufacturer of radio-transmission technology seeks assistance with a bespoke electromechanical assembly . The successful supplier must take responsibility for procurement of all components and complete all assembly in-house. This client outsource £150,000 on electronics each year, they have advised that this would be on-going work for 3 - 5 years, making this ideal for suppliers looking to fill long-term capacity. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account

  5. Drawings count: 1

    Fabrication-General Fabrication 6-15mm

    A supplier is required for the production of a steel workbench, on behalf of a fellow Qimtek member.These are to be manufactured from 90x90 box section and must also include a separate steel top. These are for in-house use, and could lead to additional batches in varying sizes. Quality is of the upmost importance, the tables must be the exact same size as they must be flush when sat side-by-side . Those that are interested in being considered for this opportunity are asked to contact the buyer directly to discuss.

  6. Drawings count: 1

    Fabrication-Presswork

    This manufacturer of gas burners, who outsources a massive £55,000 a year on fabrication, requires an ongoing supplier for the attached burner flange, making this an ideal enquiry for a company looking to fill long-term capacity. Due to an increase in quantity the buyer urgently seeks an alternative supplier for this part. There is an initial order ready for 200 off with ongoing yearly batches of 400/600 expected.

  7. Drawings count: 4

    Machining-CNC Machining, Low Volume

    This manufacturer of sports cars seeks a supplier to machine the attached mirror fitting and mirror base. This project incorporates aspects of milling, drilling,turning and threading of both stainless steel and aluminium. This is a new design with an immediate order to be placed, this will lead ongoing additional work for the successful supplier.

  8. Drawings count: 1

    Fabrication-Enclosures

    This company, who spends over £150,000 a year on outsourced fabrication, have an opportunity to source an additional supplier for a series of enclosures. The ideal supplier will be able to offer good value, whilst retaining a high quality end product.There is no immediate order to place however, the buyer has advised that this will become an ongoing requirement moving forward once an order has been confirmed.

  9. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer, who outsources over £600,000 worth of machining work each year, seeks a supplier to manufacture the attached drive gear adaptor. This is to be machined from stainless steel, ready for end use within food packaging machinery. This is a one-off requirement with an immediate order to place; however, owing the client's large machining spend, this could lead to additional work for the successful supplier.

  10. Drawings count: 1

    Fabrication-Laser Cutting

    This manufacturer of gas burners seeks a supplier to cut and etch the attached stainless steel plate and tubing. There is an order to place for 400 off of each, with ongoing batches of 500/1000 off to follow for the successful supplier. The client outsources over £55,000 worth of fabrication work every year, meaning that there is an abundance of additional opportunities available for the supplier that they select.

  11. Drawings count: 1

    Machining-Turning, High Volume

    Large volumes of a mild steel pin are currently sought for manufacture, by a company that spends an impressive £500,000 a year on bespoke machined parts. This work involves aspects of drilling and chamfering and is best suited to suppliers with immediate capacity to fill; however, the chosen company may be invited to assist with additional projects in future.

  12. Drawings count: 1

    Machining-Turning, High Volume

    The attached hose connector is required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products.

  13. Drawings count: 2

    Extrusions-Machining of Extrusions

    This design house seeks a supplier who can assist with the manufacture of some aluminium "L rails". It is thought that this may be manufactured from an off-the-shelf extrusion; therefore, work would involve the machining of all details and a selection of finishes. This is a new design for the consumer products sector, which - should it prove popular - will become an ongoing requirement for the successful supplier.

  14. Drawings count: 2

    Fabrication-General Sheet Metal Under 6mm

    This design house seeks a supplier who can assist with the manufacture of some aluminium "L rails". This work involves aspects of cutting, folding and a selection of finishes. This is a new design for the consumer products industry, which - should it prove popular - will become an ongoing requirement for the successful supplier.

  15. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This design house requires a supplier who can assist with the bending of two free-issued aluminium tubes, which are destined for use on a boat as part of a self-steering column. Although this is a one off requirement, the client outsources an abundance of work and therefore, there may be scope for the chosen supplier to assist within future enquiries.

  16. Drawings count: 1

    Fabrication-Laser Cutting

    This is a new buyer to Qimtek, who specialises in security blinds. The company behind this enquiry spends £50,000 per annum within the subcontract fabrication sphere. They are seeking quotes on a new research and development project that they are working on, to improve the security of their blinds. Their ideal supplier will be able to produce these parts economically, with an emphasis on reliability and a high quality end product. There is an order to place immediately, with ongoing work available for the chosen supplier.

  17. Drawings count: 2

    Machining-CNC Machining, Low Volume

    This is a new buyer to Qimtek, who specialises in aircraft restoration and rebuilds. The company behind this enquiry spends £100,000 a year in the subcontract machining sphere. Their ideal supplier will be able to produce these parts economically, with an emphasis on reliable lead times of 10/12 weeks and a high-quality end product. There is an order to place immediately, with ongoing work available for the chosen supplier.

  18. Drawings count: 3

    Fabrication-General Sheet Metal Under 6mm

    Outsourcing fabrication work to the tune of £250,000 every year, this company is currently seeking a supplier who can manufacture the attached lift doors. The buyer has an order ready to place for its production. Those that are interested in being considered for this job are asked to make contact with the client directly to discuss; in addition, this could result in further orders for these doors and similar products, once quality and reliability have been proven.

  19. Drawings count: 2

    Machining-Milling, High Volume

    Destined for end use within the cosplay industry, these top and bottom jaws are to be made from aluminium. Quotes are required for 1 off set for delivery early December and also 100 off sets and 1000 off sets to be delivered next year. The client has also advised that this will be an ongoing requirement with an estimated usage of 1000 off sets per year, making it an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  20. Drawings count: 2

    Machining-Machining, Multi-Axis

    This company operates within the agriculture industry and outsources over £50,000 worth of machining work every year. They have an immediate order to place for double helix anchor tips. This project incorporates elements of turning, with quotes required for 1000 off each size. The ideal supplier will be able to produce these parts economically and provide a high-quality end product; once a relationship has been established, further projects could be made available in addition to this initial requirement.

Pages