Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

3197 Projects

Displaying 141 - 160 of 3197

  1. Drawings count: 2

    Profiling-Laser Cutting

    Outsourcing approximately £100,000 worth of sheet metal work each year, this engineering design consultancy is currently in need of a profiling supplier capable of supplying the attached plates with the required coating. With an immediate order to place for this enquiry, the buyer has indicated that this is currently a one-off requirement for a large project and as such, the chosen supplier may also be asked to supply additional components of a similar nature moving forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    A sheet metal supplier is required for an immediate prototyping requirement. The buyer - a company that spends over £100,000 a year on subcontract fabrication services - seeks production of the attached sets of aluminium assemblies. This is a pre-production order and due to the grade of aluminium required, the material will be free-issued. With an immediate order to place for this enquiry, the buyer has indicated that this is very likely to be repeated in much larger volumes going forward, once the prototypes have been tested in place. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 1

    Sheet Metal Forming-Presswork

    This manufacturer of foundry products, who outsources approximately £1 million worth of fabrication and sheet metalwork each year, is currently quoting for a project and requires the assistance of a supplier to manage production of the attached bowl. Although there is no immediate order to place for this enquiry, should the buyer be successful in their tender, the order will follow immediately after. This is currently a one-off requirement, although it may be repeated on an ad-hoc basis, and the chosen supplier may be asked to manufacture additional components going forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 1

    Machining-Turning, Low Volume

    Helical turning, cutting and tapping of turbine rotors is needed, on behalf of a company that operates within the electronics sector. These are legacy parts that have been ordered every few years and the buyer is now looking to have them made in a smaller quantity, but more frequently. There is an immediate order to place for this enquiry and this is to repeated once or twice per year going forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    Machining of a core is required, destined for end use within the oil/chemical/energy sector. The client requires these parts to machined from free-issue rings, which can be supplied either whole or cut in half. The successful supplier will be required to complete the necessary grinding, as well as possibly cutting these rings in accordance with the client's specifications. There is an immediate order to place for this enquiry, which could become an ongoing requirement for the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 3

    Fabrication-Light Fabrication (under a tonne)

    Spending over £100,000 a year on subcontract fabrication services, this company is keen to form a new partnership with a supplier who can undertake production of trunking/ductwork in a variety of sizes and lengths. The client has advised that they will have plenty of work for the chosen supplier moving forward; in return, honest, reliable delivery and great quality are of paramount importance. Suppliers who are able to assist are urged to contact the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 2

    Casting-Sand Casting

    Suppliers with sand casting capabilities are invited to quote for the attached foot board rim. The client - a company that specialises in the restoration of vintage motorcyles - seeks quotes for 10 off of this part on a one-off basis. They have provided STEP and STL files; however, additional file formats are available from the client upon request. There is an immediate order to place for this enquiry, with delivery sought by the end of January 2021. **Due to the current health climate, We ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 1

    Plastic & Rubber-GRP Moulding

    This company operates within the industrial machinery sector and is currently seeking a supplier who can manufacture the attached part in PA66 GF30 reinforced fibreglass. The buyer will be looking for a low-volume run of 5/10 off initially, followed by a production run if the cost is viable. The part is required to be made in a standard black colour. Those that are interested in being considered for this job are asked to make contact with the buyer directly via email to discuss; in addition, this could result in further opportunities, once quality and reliability have been proven. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 3

    Machining-CNC Machining, Low Volume

    This company operates within the industrial machinery sector and is currently seeking a supplier who can manufacture the attached parts in aluminium. The buyer will be looking for a low-volume run of 5/10 off initially, followed by a larger production run if the cost is viable. The parts are to be supplied bead blasted/tumbled and then anodised in a standard black. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities, once quality and reliability have been proven. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  10. Drawings count: 6

    Machining-CNC Machining, High Volume

    The attached main frames are inserts for a larger moulded and bonded part, which is currently being reshored on behalf of a company that spends £30,000 a year on subcontract machining services. The client requires quotes for between 5 off and 10,000 off sets of parts, with one of each of the three designs required per set. These are new parts which the buyer is looking to order in the near future; although the initial quantities will be small, the client has advised that they will increase production over the next twelve months. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  11. Drawings count: 3

    Full turnkey-Fabrication with Machining

    Quotes are urgently sought for the attached termination block, which is required for end use within an agricultural application. This part is to be laser cut and machined, before having a bush pressed into it as per the attached drawing. The client requires quotes for 300 off, with delivery ideally required by 3rd December. Therefore, those who are able to assist are asked to make contact with the buyer as soon as possible. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 3

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    Outsourcing fabrication work to the tune of £100,000 every year, this company specialises in the manufacture of ramps. They are currently seeking assistance from a Qimtek member who can produce a lanyard bracket from 0.9mm thick galvanised steel, in accordance with the drawings provided. In addition to having an immediate order to place, the client has advised that this will be an ongoing requirement, spelling long-term work for the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 2

    Machining-Turning, Low Volume

    This buyer, a manufacturer of vacuum excavation equipment, urgently seeks a supplier to produce the attached carbon steel driveshafts in a batch of 10 off at this time. The client spends £100,000 a year on bespoke machined components and requests that interested parties quote their best price and delivery in order to be considered for this opportunity. They are currently looking to improve on supplier reliability and may wish to utilise the successful vendor's services within additional projects, once a relationship has been cultivated. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.** IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to caroline.ogden@qimtek.co.uk or fax 01256 394600, Once received, all drawings and documents will be released to your account.

  14. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    Spending a massive £500,000 a year on bespoke fabricated parts, this buyer would like to speak with Qimtek members who can quote for the attached channels. These will be required within 2 weeks of order placement, as the client has no existing supplier for these parts. The channels will be used within food packaging machinery, with 3 off of each required in this instance. Incorporating elements of pressing, forming and welding, this project will be suited to versatile suppliers with a range of in-house capabilities. In addition, reliability and good lead times are essential. Owing to the client's substantial spend, it could result in additional work being made available to the successful supplier once a relationship has been established. There is an immediate order to place with a supplier who can fulfil all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 1

    Machining-Turning, Medium Volume

    This new buyer to Qimtek specialises in the manufacture of hydraulic valves and has an outsourcing spend of £100,000 per annum on machining processes. They are currently seeking a new supplier for production of the attached spools. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This client, a manufacturer of automotive safety systems, urgently seeks a supplier for the manufacture of the attached machined components. As well as having an immediate order to place, the buyer has advised that this could develop into ongoing work for the chosen supplier, making it an excellent opportunity to expand your long-term customer portfolio. Due to a very tight deadline, the client seeks a manufacturing lead time of 2-3 weeks and requires delivery by week 51. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  17. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    Spending over £100,000 a year on subcontract fabrication services, this company operates within the construction industry. They currently seek a supplier for the complete manufacture of the attached galvanised steel box ducting connections for a full return air ducting system. Delivery is required within 2-3 weeks of order placement, making this an ideal opportunity for those with immediate capacity to fill. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  18. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This new Qimtek buyer currently seeks a supplier who is able to produce the attached mild steel component, which is destined for end use within laboratory equipment. Quotes are sought for 4 off at this time. There is an immediate order to place for this enquiry, with the possibility of ongoing work to follow. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  19. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This engineering consultancy company completes a lot of their own manufacturing in-house; however, due to current circumstances, they are running at full capacity and are in need of an external supplier who can assist with the immediate manufacture of the attached alignment blocks. There is an immediate order to place for at least 25 off, although higher volumes may be ordered for stock purposes if the price is favourable. This is a one-off requirement, although the chosen supplier may be asked to manufacture additional, similar components going forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  20. Drawings count: 6

    Machining-Turning, Low Volume

    This regular buyer to Qimtek has an urgent order to place for the attached mild steel tubing, which will be used within agricultural equipment. Quotes are sought for 10 off and 20 off respectively, with scope for repeatable and ongoing work to follow for the chosen supplier once a relationship is established. Those that can assist are asked to make contact with the buyer directly to discuss. **Due to the current health climate, We ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

Pages