Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

35 Projects

Displaying 1 - 20 of 35

  1. Drawings count: 2

    Machining-Milling, Medium Volume

    This new buyer to Qimtek has an order to place for the attached designs of plates and supports, made from 12mm and 18mm thick MDF material. Profiling and drilling/machining processes are required. Quotes are sought for 1, 5, 10, 25 and 50 sets, with each set containing 1-2 off of each drawing as directed. Pricing and quality is key for this enquiry. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  2. Drawings count: 1

    Machining-Milling, Medium Volume

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to cut, chamfer and countersink the attached plate for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  3. Drawings count: 1

    Machining-Milling, Medium Volume

    This security equipment manufacturing and installation company, who outsources approximately £100,000 worth of machining each year, has recently completed a design for a new range of components to be used within their security systems. Therefore, they are looking for potential aluminium milling suppliers to assist with the attached hex units. There is an immediate order to place for this enquiry and this is expected to be repeated at least 4 times per year in potentially increasing quantities going forward.

  4. Drawings count: 2

    Machining-Milling, Medium Volume

    Destined for use within autosport vehicles, these carbon fibre parts are sought by a manufacturer who currently spends approximately £85,000 each year on outsourced machining. There is an immediate order to place for this enquiry which is a one-off requirement at this stage, although the chosen supplier may be asked to quote for additional, similar components once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  5. Drawings count: 1

    Machining-Milling, Medium Volume

    Due to a lack of in-house capacity, this company is looking to collaborate with a third party who can mill the two attached blocks. The work will be especially well-suited to those who have immediate capacity, with delivery required at the supplier's earliest possible convenience. The blocks are destined for end use within special purpose machinery and are ordered in similar quantities on an annual basis.

  6. Drawings count: 1

    Machining-Milling, Medium Volume

    A sheet metal and fabrication company, who themselves spend approximately £50,000 each year on outsourced machining services, currently seeks immediate quotations for the manufacture of the attached aluminium shims. Destined for use within a new hotel build, the buyer has stated that this is an immediate order to place for these parts, with delivery required no later than February 28th. Although this is currently a one-off requirement, the chosen supplier may be asked to quote for additional, similar items once a relationship has been established.

  7. Drawings count: 1

    Machining-Milling, Medium Volume

    This manufacturer of bicycle storage and lock-up units is in urgent need of a supplier who can assist with the milling of the attached blocks. There is an immediate order to place for this enquiry, with delivery ideally required by January 31st. This order is to be repeated going forward, although as it is for an older assembly, this will be on an ad-hoc basis. Furthermore, the chosen supplier may be asked to manufacture additional components of a similar nature.

  8. Drawings count: 2

    Machining-Milling, Medium Volume

    This engineering consultant is currently seeking a supplier to produce the attached machined components, which require milling and a small amount of drilling. There is an immediate order to place for this enquiry, which could develop into both ongoing and additional work for the successful supplier. The client requires quotes for a range of material options and batch sizes, with all material to be supplied on a free-issue basis.

  9. Drawings count: 2

    Machining-Milling, Medium Volume

    This steel fabrication company has been asked to quote for the attached coil supports; therefore, they require the assistance of a machinist to angle the corner edges of free-issued, pre-folded blanks. Currently outsourcing approximately £85,000 worth of machining each year, the buyer seeks these parts for end use within a construction application. Although this is currently a one-off requirement, it may be repeated in line with customer demand going forward.

  10. Drawings count: 2

    Machining-Milling, Medium Volume

    This client, who outsources approximately £25,000 worth of machining requirements each year, currently seeks a supplier with the capabilities to produce the attached "blade holder" from free issue profiles. There is an order to place for this enquiry with quotes required for 50 off and 100 off.

  11. Drawings count: 1

    Machining-Milling, Medium Volume

    This manufacturer of industrial ovens is currently looking for additional suppliers for their aluminium mounting angles and would like to hear from interested Qimtek suppliers. There is an immediate order to place for this enquiry, which is to be repeated in line with stock requirements estimated to be twice per year.

  12. Drawings count: 2

    Machining-Milling, Medium Volume

    This manufacturer of industrial ovens is currently looking for possible alternative suppliers of their brass door links and would like to receive quotations from interested Qimtek suppliers. Although there is no immediate order to place, the buyer is running low on stock and will be looking to place the order toward the end of November, or early December. This is to be repeated in line with stock requirements, which is usually every six months.

  13. Drawings count: 3

    Machining-Milling, Medium Volume

    This Qimtek member currently has a requirement for the attached parts to be milled from EN3 mild steel. They require quotes for 148 sets of this part, which will develop into an ongoing requirement moving forward. There is an immediate order to place with the successful supplier, meaning that this project will be a great fit with those looking for both ongoing and immediate enquiries.

  14. Drawings count: 1

    Machining-Milling, Medium Volume

    This regular Qimtek buyer specialises in industrial window cleaning equipment and has an order to place for this rinse nozzle bracket to be made from aluminium. Quotes are required for 500 off, to be supplied with a bare finish. Quotes are also required for the same quantity but with a black anodised finish. Pricing and reliable delivery are of the most importance within this enquiry and once a relationship is established, it could also lead to ongoing work in addition to this initial enquiry.

  15. Drawings count: 1

    Machining-Milling, Medium Volume

    This client, who spends £40,000 a year on subcontract machining, seeks a supplier for the production of the attached link holder. These are to be produced from mild steel and have historically been machined from solid bar; however, these can be produced from multiple pieces and welded if it would reduce manufacturing costs. The buyer is looking to review their existing supplier base for these items and subsequently, they are keen to establish contact with those who have the capacity for this type of work. Moving forward, this order will be repeated, making it an ideal opportunity to grow your long-term customer base.

  16. Drawings count: 1

    Machining-Milling, Medium Volume

    This start-up furniture manufacturer is interested in hearing from possible suppliers of a set of number shapes, which will be attached to their own bespoke furniture range. Although the larger production volumes are expected to be cast, a supplier is sought to machine the smaller order volumes initially. There is an immediate order to place for this enquiry which is expected to be a one-off requirement, with delivery sought at the chosen supplier's earliest convenience.

  17. Drawings count: 5

    Machining-Milling, Medium Volume

    This manufacturer of ramps, who spends a sizeable £100,000 a year on subcontract machining services, are currently looking for a supplier to produce the attached gear plates, support plates and mount plates. There is an immediate order to place for 100 & 200 off with delivery required by 09/09/2019 at the latest. This is a great opportunity for a reliable supplier, who can also offer good quality end products, to build an ongoing partnership with this client. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  18. Drawings count: 1

    Machining-Milling, Medium Volume

    This engineering manufacturer is in need of assistance from a machining supplier who can assist with the immediate - as well as repeat - production of the attached mild steel angled bars, on behalf of their end client. This design is to be used within a new park ride - as such, the batch quantity and frequency is not yet known, but will be dictated by customer demand moving forward.

  19. Drawings count: 1

    Machining-Milling, Medium Volume

    This engineering manufacturer is in need of assistance from a machining supplier who can assist with the immediate - as well as repeat - production of the attached spacer block, on behalf of their end client. This design is to be used within a new park ride - as such, the batch quantity and frequency is not yet known, but will be dictated by customer demand moving forward.

  20. Drawings count: 2

    Machining-Milling, Medium Volume

    This manufacturer of replica lightsabers has previously had their products manufactured in plastic, but is now looking to move across to a more solid product and would like to hear from suppliers who can assist with the machining of the attached aluminium components. With an immediate order to place, this enquiry is expected to be repeated on a quarterly basis going forward, as well as similar projects being made available to the chosen supplier as they are developed.

Pages