Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

251 Projects

Displaying 1 - 20 of 251

  1. Drawings count: 4

    Machining-CNC Machining, Low Volume

    The three attached plugs and cases are required for end use within scientific instrumentation. The buyer has advised that the material is to be free-issued and the project will be ordered for delivery early next year. Quotes are sought for 1 off of each design and in addition, the client has specified that the chosen supplier will be invited to assist within additional projects, as this is typical of the work they outsource.

  2. Drawings count: 5

    Machining-CNC Machining, Low Volume

    The attached cutter blanks are to be machined from free-issue tool steel. Destined for use within the automotive industry, the parts in question are to be quoted in batches of 10 off of each. The client has advised that they are looking for a supplier who can assist with the production of these parts on a repeat basis, making this a good fit for those who are interested in expanding their long-term customer portfolio.

  3. Drawings count: 4

    Machining-CNC Machining, Low Volume

    The attached component will be used as part of replica props, with quotes required for 1 off and 4 off at this time. The client has an immediate order to place for the work in question and has also advised that this will be an ongoing requirement, although the batch frequency has yet to be confirmed. Delivery is required by 20th September, making this a good opportunity to fill imminent capacity.

  4. Drawings count: 4

    Machining-CNC Machining, Low Volume

    This client, a research fellow at Surrey University, urgently seeks a supplier to produce the attached front and rear yokes. The yokes are to be made from Maximag iron and requires drilling, turning, milling and tapping. Delivery and lead-time are the most important considerations within this enquiry, with delivery needed by the second week of September at the latest. However, owing to the product's end use, quality is also very important.

  5. Drawings count: 2

    Machining-CNC Machining, Low Volume

    This buyer, a company who specialises in the manufacture of pneumatic control equipment and spends £50,000 a year on outsourced machined components, seeks a new supplier for the machining of free-issue SG iron castings destined for a marine application. Their ideal supplier will be able to produce this part economically and to a high standard, whilst maintaining reliable delivery of 8 weeks. There is an immediate order to place, with ongoing work available for the chosen supplier.

  6. Drawings count: 1

    Machining-CNC Machining, Low Volume

    Quotes are sought for the attached cast foot to be finish machined in accordance with the buyer's specifications. The client has an order to place for 60 off in total, with two holes to be machined on 30 off and a total of three holes to be machined on the remaining 30 off. Delivery is required by the end of the month, making this a great opportunity to fill immediate capacity.

  7. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This manufacturer of medical equipment, who outsources in excess of £500,000 worth of machining work per year, is looking for a supplier who can machine handles from solid bar. This project includes turning and knurling processes. The parts are required within 2/3 weeks and therefore, suppliers able to offer quality manufacture and prompt delivery are eagerly sought.

  8. Drawings count: 3

    Machining-CNC Machining, Low Volume

    This client, a subsea engineering company and manufacturer of oil field equipment, is in urgent need of a supplier who is able to turnaround the attached stainless steel components. There is an immediate order to place for this enquiry and although this is only currently a one-off requirement, the chosen supplier may be asked to manufacture additional similar parts going forward, once a relationship has been established.

  9. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This manufacturer of industrial machinery has an immediate requirement for the machining of the attached die shoe carriers, which are to be made from bright mild steel. With an immediate order to place, the buyer is look for delivery by August 14, 2020, meaning that this enquiry will be best suited to those with immediate capacity to fill. Although this is currently a one-off requirement, these parts are required on an ad-hoc basis, therefore the chosen supplier may be asked to manufacture additional components once a relationship has been established.

  10. Drawings count: 7

    Machining-CNC Machining, Low Volume

    This client, a subsea engineering company and manufacturer of oil field equipment, is in urgent need of a supplier who is able to turnaround the attached mind steel components. There is an immediate order to place for this enquiry and although this is only currently a one-off requirement, the chosen supplier may be asked to manufacture additional similar parts going forward, once a relationship has been established.

  11. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This company operates within the consumer products industry and outsources over £500,000 worth of machining work every year. They have an order to place for a star cap tool design to be used within one of their existing storage products. This project incorporates elements of turning, milling, drilling and powder coating, with quotes required for 10 off. The ideal supplier will be able to produce these parts economically and once a relationship has been established, further orders with repeatable batches could be made available, in addition to this initial requirement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  12. Drawings count: 2

    Machining-CNC Machining, Low Volume

    Production of inner shafts is needed, which are destined for end use within a scientific application. The client is looking to work alongside a supplier who can produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  13. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer specialises in steel manufacturing and seeks a new supplier for the attached liners. With an annual spend in excess of £100,000 across all outsourced machining work, the client has an immediate order to place for the project in question. Pricing, a good quality end product and reliable delivery are all important considerations within this enquiry. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.*

  14. Drawings count: 3

    Machining-CNC Machining, Low Volume

    This company operates within the electronics industry. They are currently performing a full PSL review and subsequently, they seek quotes from companies who are able to manufacture the attached pillar support, tie strap, intercontact insulation and captive screw. Orders will be placed for 20 off of each part on an ad-hoc basis, which are to be made in accordance with the drawings provided. The client has requested that interested suppliers use the drawing numbers as reference numbers when quoting and also that they state any carriage/delivery costs separately within their quotation. This is a great opportunity for those who are looking to expand their long-term customer portfolio. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  15. Drawings count: 5

    Machining-CNC Machining, Low Volume

    This client currently seeks suppliers to produce the attached components, destined for end use within the automotive sector. The ideal supplier will be able to produce these items to a high degree of precision without jeopardising lead times, whilst also maintaining cost-effective pricing. There is an initial order to place for 1000 off of each item, which is expected to increase exponentially moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  16. Drawings count: 2

    Machining-CNC Machining, Low Volume

    Outsourcing machining work to the tune of £25,000 annually, this company is currently looking to speak with suppliers who are able to machine a free-issue casting in accordance with the drawing attached. The client has an order to place for the work in question and subsequently, they are keen to gain an understanding of the associated costs and lead times. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  17. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer is seeking a simple CNC routing procedure to cut a 6mm wide groove in two brass discs. The buyer can supply the material, or if the cost is good enough, they are happy to have the material supplied. The required material is ¼’’ brass sheet, 500mm in diameter, in a free cutting grade to help with cutting time. The final art work will vary, but the client is keen to assess initial costs from this example to see if the work is feasible. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  18. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer is currently seeking prices for the attached dumbbell design from prototype to low production volumes. This design is to be machined from stainless steel. Prices are requested for 2 off, 4 off, 10 off and 20 off respectively. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  19. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This client, a manufacturer of wire & fastener machinery whose annual outsourced manufacturing spend exceeds £40,000, is looking for a supplier who is able to assist with the production of the attached components as part of an ongoing machine refurbishment. There is an immediate order to place for this enquiry; in addition, there are multiple machines to be serviced, making this an excellent opportunity for those looking to secure ongoing work. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfill the requirement.**

  20. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer requires production of four different chainring designs, as well as a pair of crank arms. They have provided the drawings for one chainring design and one crank arm for reference - please be aware that these drawings should provide enough information for all designs to be produced. Small runs of 20-50 off of each component are needed, for which there is an immediate order to place. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

Pages