Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

282 Projects

Displaying 1 - 20 of 282

  1. Drawings count: 1

    Profiling-Laser Cutting

    10mm thick plates require laser cutting, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements in future.

  2. Drawings count: 1

    Profiling-Laser Cutting

    3mm thick Durbar plates are required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an onsite project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements that are similar in nature.

  3. Drawings count: 1

    Profiling-Laser Cutting

    10mm thick cap plates require laser etching, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements in future.

  4. Drawings count: 4

    Profiling-Laser Cutting

    Outsourcing approximately £20,000 worth of fabrication work per year, this design house currently seeks a supplier for the attached "L" section brackets, which are to be cut to length and have Ø 4.5mm holes cut into them for fixing. Quotes are required for several pairs, with each pair consisting of both a left hand and a right hand bracket. This is a bespoke, one-off order, but it may lead to future enquiries for the chosen supplier.

  5. Drawings count: 2

    Profiling-Laser Cutting

    This electronics manufacturer requires a supplier who can assist with a prototype run of the attached aluminium plates, as well as the production runs that are due to follow. There is an immediate order to place, which is expected to be followed by repeated orders for larger batches, alongside other previously prototyped parts. This is an urgent requirement for which delivery is sought as soon as possible and therefore, interested suppliers are asked to make contact at their earliest opportunity.

  6. Drawings count: 2

    Profiling-Laser Cutting

    This buyer, a manufacturer of forklift trucks, seeks a supplier with the capacity to profile the attached seat spacers. The client outsources in excess of £1million worth of fabrication work every year; therefore, the successful supplier could secure not only this enquiry, but also a big-spending name to add to their customer base. The buyer would like to work with a supplier who is able to offer repeat supply of these components, making this an excellent opportunity to fill both immediate and ongoing capacity.

  7. Drawings count: 1

    Profiling-Laser Cutting

    20mm thick base plates and cap plates are required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements in future.

  8. Drawings count: 1

    Profiling-Laser Cutting

    Mild steel end plates are required, on behalf of a company that specialises in the manufacture of steel products. They would like to collaborate with Qimtek members that are able to offer laser cutting - as well as drilling and tapping - at good value, for use within an onsite project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirement once a relationship has been established.

  9. Drawings count: 10

    Profiling-Laser Cutting

    The attached components are urgently required by a manufacturer of industrial fan units. The company behind this enquiry has an annual spend of £20,000 on bespoke fabricated parts and seeks assistance with an immediate order, as well as further requirements for these items moving forward. In addition, there may also be scope to venture into other opportunities alongside this project, once delivery and value have been proven.

  10. Drawings count: 2

    Profiling-Laser Cutting

    5mm thick landing feet & landing tabs are required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements that are similar in nature.

  11. Drawings count: 1

    Profiling-Laser Cutting

    10mm thick base plates and cap plates are required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements that are similar in nature.

  12. Drawings count: 1

    Profiling-Laser Cutting

    This £30,000-spending company is looking for a new supplier to manufacture 150 off stainless steel fluid guides and has an immediate order to place. The client has also requested that if it's more cost effective to cut a certain number from a single sheet, then to quote for the corresponding quantity. This request will be repeatable for this part, with the possibility of similar designs also being made available, making this a great opportunity to fill long-term capacity. Because of the urgent nature of this project, the buyer will award the work early should a favourable quotation arrive quickly; therefore, interested suppliers are asked to make contact at their earliest convenience.

  13. Drawings count: 1

    Profiling-Laser Cutting

    5mm thick mild steel plates are required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an on-site project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements that are similar in nature.

  14. Drawings count: 2

    Profiling-Laser Cutting

    This fabrication company is currently quoting to win work for a large quantity of stands and set-ups, but cannot manage all the parts in-house; therefore, they would be interested in hearing from profiling companies who can assist with production. The work itself involves laser cutting, as well as a small amount of folding and slotting, making it an ideal fit with versatile suppliers. Outsourcing approximately £10,000 worth of fabrication work each year, the client may also look to extend additional orders to the chosen supplier once a relationship has been established.

  15. Drawings count: 1

    Profiling-Laser Cutting

    Mild steel end plates are required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an onsite project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements that are similar in nature.

  16. Drawings count: 1

    Profiling-Laser Cutting

    This manufacturer, who provides steelwork to construction companies and outsources approximately £25,000 in fabrication each year, is in need of a supplier for profiling of mild steel plates. With an immediate order to place, delivery is required by February 11th; therefore, interested parties are asked to quote at their earliest convenience. This is currently a one-off requirement, but these parts will be repeated for future projects.

  17. Drawings count: 1

    Profiling-Laser Cutting

    Mild steel base plates are required, on behalf of a company that specialises in the manufacture of steel products. They would like to hear from companies that are able to offer these designs at good value, for use within an onsite project. With a £350,000 annual spend in this arena, the buyer may also choose to utilise the services of the successful supplier within additional requirements that are similar in nature.

  18. Drawings count: 9

    Profiling-Laser Cutting

    This manufacturer of industrial fan units urgently requires quotes for the attached stainless steel and mild steel profiles. The company behind this enquiry has an annual spend of £20,000 on bespoke profiled parts and seeks assistance with an immediate order, as well as further requirements for these items moving forward. In addition, there may also be scope to venture into other opportunities alongside this project, once delivery and value have been proven.

  19. Drawings count: 4

    Profiling-Laser Cutting

    Quotes for the attached profiles are urgently required by a manufacturer of industrial fan units. These are to be manufactured from stainless steel in a variety of thicknesses. The company behind this enquiry has an annual spend of £20,000 on bespoke fabricated parts and seeks assistance with this order, as well as further requirements for these items moving forward. In addition, there may also be scope to venture into other opportunities alongside this project, once delivery and value have been proven.

  20. Drawings count: 6

    Profiling-Laser Cutting

    This manufacturer of fabrication equipment who spends around £500,000 a year on outsourced fabrication, is currently looking to move the profiling of their brackets under one roof - subsequently, they would like to hear from interested parties. There is an immediate order to place for the attached parts, with delivery required at the supplier's earliest convenience. In addition, at least another 10 bracket designs which are less common, will also be required from the chosen supplier. These orders are to be repeated on a yearly basis, making this a good opportunity for suppliers looking for a new long-term buyer.

Pages