Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

148 Projects

Displaying 1 - 20 of 148

  1. Drawings count: 3

    Machining-Machining, Plastics

    Machining of polycarbonate parts is required, by a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. The parts are to be made in accordance with the drawings provided. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, as well as a reliable delivery time within 7/10days, as their current production is dependent on the arrival of these parts. There will be an order to place immediately with the chosen vendor.

  2. Drawings count: 1

    Machining-Machining, Plastics

    This manufacturer of ramps, who spends £100,000 a year on subcontract machining services, seeks a supplier for the attached cable ends . There is an immediate order to place for this enquiry which is to be delivered by 09/10/2020 at the latest. This is a great opportunity for reliable suppliers who can offer good quality end products to secure a new ongoing customer.

  3. Drawings count: 4

    Machining-Machining, Plastics

    This project calls for the turning and threading of copper pipe fittings, to be used within electronic equipment. The client - a company that spends £150,000 a year on bespoke machined components - would like to partner with a supplier that can manufacture this design to a high standard of quality, whilst also offering good value. Those with the ongoing capacity available to assist with this repeat work are asked to make contact with the buyer directly to discuss.

  4. Drawings count: 1

    Machining-Machining, Plastics

    This buyer is currently reviewing their supply chain and seeks quotes from Qimtek members for the attached set of components, which will be used within the furniture industry. Depending on the quotes received, the client has an immediate order to place for 29 sets, which are all to be made from a white, low-cost plastic. This is a one-off requirement, making it a good fit with those who have imminent capacity to fill. There may also be an opportunity to assist the buyer within additional projects in future, once a relationship has been established.

  5. Drawings count: 2

    Machining-Machining, Plastics

    Quotes are currently sought for the attached pushers which are to be made from blue Nylon. The nature of the client's business is the manufacture of food processing machinery - these components are required for end use within one of their products and therefore, they must be fit for purpose within such an environment. Interested parties are asked to make contact with the buyer before the end of the month, offering their best price and lead time.

  6. Drawings count: 3

    Machining-Machining, Plastics

    This manufacture of luxury pens is looking for a supplier who is able to offer production of a selection of plastic pen components, to be made from free-issue acrylic blocks. This will become an ongoing requirement, making it an excellent opportunity for those who are looking to increase their long-term customer portfolio. Additional and alternative components will also be made available to the successful supplier, once quality and reliability have been proven.

  7. Drawings count: 1

    Machining-Machining, Plastics

    This new buyer to Qimtek, who specialises in bicycle components, seeks a new supplier for the attached hat bush parts. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  8. Drawings count: 1

    Machining-Machining, Plastics

    This company spends in excess of £50,000 a year within the realm of subcontract machining and operates within the electronics industry. They are currently seeking quotes for an existing part detailed in this project. The part is turned, using black Delrin material. Please note that the client is looking for an alternative primary supplier and dependent on price, the minimum order quantity will be approximateley 30 off.

  9. Drawings count: 1

    Machining-Machining, Plastics

    This buyer, a manufacturer of British sports cars, seeks the assistance of a supplier with the necessary capabilities to produce the attached component. Quotes are required for batches of 10 off at this time. Owing to the buyer's impressive £500,000 annual machining spend, the chosen supplier will be given the opportunity to develop an ongoing relationship and assist within further machining projects moving forward.

  10. Drawings count: 1

    Machining-Machining, Plastics

    This client, a large manufacturer of agricultural machinery, currently seeks a supplier who is able to produce the attached plastic components which require milling, drilling and turning for completion. There is an immediate order to place for this enquiry and interested parties are asked to give their best price and lead time when providing a quotation. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  11. Drawings count: 1

    Machining-Machining, Plastics

    This company spends in excess of £50,000 a year within the realm of subcontract machining and operates within the electronics industry. They are looking to work with a supplier that is able to undertake the manufacture of a machined barcode mount with quotes required for 3 off. This is a new design, for which there is no current supplier in place. Delivery of the 3 off is required later in the month, making this an excellent opportunity to fill capacity moving into the near future. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  12. Drawings count: 3

    Machining-Machining, Plastics

    This start-up company has an order to place for this design of piston ring and bucking, which are parts of a paintball gun for the leisure industry. The buyer is open to receiving advice on the best method of manufacture for these components. Quotes are sought for 200 off as an initial order and 3000 off. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  13. Drawings count: 5

    Machining-Machining, Plastics

    This manufacturer of medical/scientific equipment is looking for a supplier to produce and assemble a capsule made from clear polycarbonate, with 2 small magnets inside. They have an order to place for 300 off of these units, which are to be manufactured in accordance with the drawings provided. In addition, delivery is required within five weeks of order placement. Owing to the urgent nature of this enquiry, interested suppliers are asked to make contact with the buyer at their earliest convenience. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  14. Drawings count: 2

    Machining-Machining, Plastics

    This company operates within the electronics industry. They are currently performing a full PSL review and subsequently, they seek quotes from companies who are able to manufacture the attached plastic components. Orders will be placed for 20 off of each part on an ad-hoc basis, which are to be made in accordance with the drawings provided. The client has requested that interested suppliers use the drawing numbers as reference numbers when quoting and also that they state any carriage/delivery costs separately within their quotation. This is a great opportunity for those who are looking to expand their long-term customer portfolio. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  15. Drawings count: 0

    Machining-Machining, Plastics

    CNC routing of stockboard sheet is required by a manufacturer of security products. The client is looking to order three sheets at a time, with several designs to be included on each sheet in accordance with the client's specifications. There are no drawings available for this enquiry at present; however, the buyer is keen to establish contact with those who can assist. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  16. Drawings count: 1

    Machining-Machining, Plastics

    This buyer is currently seeking best price and delivery for the attached Clamp Ring. Please note the outer diameter of this ring is over 1 meter. Material is Nylon 6

  17. Drawings count: 1

    Machining-Machining, Plastics

    This buyer is currently looking for the best method of manufacture for a universal probe handle used widely in gas detection. Ideally they will be looking at having these manufactured in high volume (1000's). They will require a few prototypes and they may have redesigns during this process. The buyer is looking for a supplier that can work with them on the part as this will most likely lead to ongoing work. The buyer has suggested Polyethylene as the material, however should a supplier know of alternative or more suitable types of plastic, please include this when quoting. Please Note, that due to the potential volumes of this part, it will also be sent to Qimtek Injection Moulding Suppliers.

  18. Drawings count: 1

    Machining-Machining, Plastics

    Quotes for a large selection of plastic machined parts are required urgently. Please note; there are approximately 60 parts to quote on, with varying quantities. The buyer has provided a full spreadsheet which details overall parts sizes, grades of plastic and quantities required. The buyer is looking for a supplier who can quote for the whole list.

  19. Drawings count: 3

    Machining-Machining, Plastics

    With an annual outsourcing spend of over £50,000 on bespoke machined designs, this regular buyer to Qimtek has an order to place for the attached part.

  20. Drawings count: 1

    Machining-Machining, Plastics

    This regular Qimtek buyer has an immediate order to place for the attached Wear Plates. Quotes are sought for 24 off. Please Note: Material will be Free Issued.

Pages