Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

109 Projects

Displaying 1 - 20 of 109

  1. Drawings count: 1

    Machining-Milling, Low Volume

    This manufacturer of testing equipment currently seeks a supplier to produce a series of milled components. This project involves milling and drilling, with the components to be made from a variety of materials including stainless steel, aluminium and mild steel. The ideal supplier will be able to offer competitive pricing, whilst maintaining steady delivery and lead times.

  2. Drawings count: 1

    Machining-Milling, Low Volume

    This manufacturer of power amplifiers is looking to replace a long-term supplier, who is moving premises to Southern Ireland. Currently outsourcing approximately £200,000 worth of machining each year, there is an immediate order to place for this housing enquiry, which is repeated on a yearly basis in varying quantities. The chosen supplier will also have the opportunity to quote for other machined parts once a relationship has been established, making this an ideal enquiry for companies looking for a new long-term customer.

  3. Drawings count: 4

    Machining-Milling, Low Volume

    Outsourcing over £19million of machined parts annually, this client is looking for a new supplier to provide quotes as part of a cost reduction exercise. Target pricing has been provided by the buyer, who has confirmed there is room to increase the minimum order quantity should the target pricing not be able to be met with the quantities shown. The 12 months' usage quantities are shown as a guide, which has been calculated from previous years' usage, so these may change slightly when the order is ready to place. This company is actively looking for new suppliers to increase their preferred supplier list, so for those seeking long-term relationships with large clients, this is an opportunity not to be missed. Please note that due to the confidentiality surrounding these parts, signed NDAs will be forwarded onto the buyer for approval before drawings can be released. Therefore, there may be a short time delay before drawings are released for this reason.

  4. Drawings count: 2

    Machining-Milling, Low Volume

    With a £30,000 annual spend on outsourced machining, this client is looking for a new supplier to machine the attached stainless steel valve housings using milling, drilling and tapping processes. Quotes are required for 10 off at this time. There is an order to place and there is also scope for additional work once the pricing and quality is proven.

  5. Drawings count: 1

    Machining-Milling, Low Volume

    This client is looking for a supplier to machine 25 off upside-down hearts, to be inserted into banister spindles as part of a building project. A soft wood is to be used - for example, pine. The ideal supplier will be able to offer reliable delivery and produce this parts economically. The client has advised that this will be a one-off requirement, making it an ideal opportunity to fill short-term and immediate capacity.

  6. Drawings count: 1

    Machining-Milling, Low Volume

    This is an opportunity to assist a buyer with £50,000 annual spend on outsourced machining, who operates within the autosports industry. They are looking to work with a machining company that has the immediate capacity available to manufacture the attached propshaft supports - a new part, for which there is no current supplier. This company has regular subcontract machining requirements, meaning that the successful supplier may also be invited to assist with additional projects. The order is ready to place and therefore, interested suppliers are asked to submit their quotation as soon as possible.

  7. Drawings count: 1

    Machining-Milling, Low Volume

    These carbon steel lifting bars and delrin pads will form a lifting fixture and are required by a company that spends over £250,000 per year on bespoke machined designs. Quotes are required for 3 off and 6 off quantities and the client has also advised that although this will most likely be a one-off requirement, similar work will also be required later, making it an ideal opportunity to fill long-term capacity moving forward.

  8. Drawings count: 1

    Machining-Milling, Low Volume

    This buyer, a manufacturer of carbon fibre products whose annual outsourced machining spend totals in excess of £50,000 per annum, seeks the assistance of a machinist to manufacture the attached aluminium frame. There are 4 separate components that make up the frame and all must be machined from solid. There is an immediate order to place for this project, with potential for ongoing work moving forward.

  9. Drawings count: 3

    Machining-Milling, Low Volume

    This woodworking manufacturer is in need of the assistance of a supplier who can undertake production of the attached machine brackets, to replace the existing ones in their own machinery. The order will be placed at the start of 2019, with delivery required for February - or earlier if the successful supplier's capacity allows.

  10. Drawings count: 4

    Machining-Milling, Low Volume

    Outsourcing machining work to the tune of over £200,000 every year, this company is currently seeking a supplier who can machine the attached pair of finger joints using free-issue duplex material. This design will be used as part of a new and major footbridge project in Cornwall and the buyer has an immediate order ready to place for its production. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities of similar work once quality and reliability have been proven.

  11. Drawings count: 1

    Machining-Milling, Low Volume

    Destined for end use within the agriculture industry, these swivel blocks are to be made from mild steel, on behalf of a company that spends over £50,000 per year on bespoke machined designs. Ideally, the client requires quotes for 5 off to be submitted this week and has also advised that this will be an ongoing requirement, making it an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the buyer moving forward.

  12. Drawings count: 4

    Machining-Milling, Low Volume

    Destined for end use within the marine industry, these end caps are to be made from aluminium, on behalf of a company that spends over £50,000 per year on bespoke machined designs. Quotes are required for an array of low quantities and the client has also advised that this will be an one-off requirement, making it an ideal opportunity to fill immediate capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  13. Drawings count: 2

    Machining-Milling, Low Volume

    This buyer specialises in the manufacture of heating elements and would like to invite suppliers with capacity to quote for the milling of aluminium furnace bases. The company behind this enquiry spends over £10,000 a year on bespoke machined products. As well as having an immediate order to place, they will also require this part on a repeat basis moving forward. This is a new design, for which a supplier has not yet been allocated.

  14. Drawings count: 1

    Machining-Milling, Low Volume

    These free-issue gears, made from aluminium bronze, are to be machined using the milling/keyway process to the specifications shown on the attached drawing, on behalf of a company that spends over £240,000 per year on bespoke machined designs. Quotes are required for 2 off and the client has also advised that this will be an one-off requirement, making it an ideal opportunity to fill short-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  15. Drawings count: 3

    Machining-Milling, Low Volume

    This buyer with £500,000 spend on subcontract machining is looking for an external supplier to manufacture the attached front parts, back parts, sides and bases. These items will be used within industrial machinery. There is an order to place for these parts, with similar work available for the chosen supplier moving forward. Owing to the abundance of engineering projects that the client outsources, there is plenty of scope for the chosen vendor to build upon the relationship.

  16. Drawings count: 2

    Machining-Milling, Low Volume

    This is an ideal opportunity for a Qimtek member who has immediate capacity to fill, as quotes are currently required for the attached wear blocks. The buyer behind this enquiry works within the appliance industry and has a sizeable outsourcing spend of £70,000 per annum on machining processes. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  17. Drawings count: 3

    Machining-Milling, Low Volume

    This is an urgent requirement for high precision milling of link scissor parts from free-issue material. The client has over £30,000-£50,000 worth of machining work to place with subcontract suppliers per month and therefore, the successful vendor may also benefit from additional projects moving forward. Due to a lack of in-house capacity, the buyer would ideally like to receive delivery of the completed parts by Friday 28th September, meaning that interested suppliers will need to submit their quotation as soon as possible.

  18. Drawings count: 8

    Machining-Milling, Low Volume

    Suppliers with milling capacity are urgently sought by a manufacturer of hydraulic equipment. They have an immediate order to place for the machining of free-issue components, namely brackets, struts, mounts and links. Prompt responses are required as is a fast turnaround, with delivery needed by the end of September. This company has plenty of additional work to place with the successful supplier, making it a great opportunity to win a new long-term customer. In addition, the attached parts will be required multiple times per year. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sarah.venning@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  19. Drawings count: 1

    Machining-Milling, Low Volume

    Outsourcing machining work to the tune of £500,000 per year, this manufacturer of medical equipment is looking to work with a supplier who can machine a field clamp from free-issue low carbon steel. This design is to be quoted in batches of 24 and 48 off, with the former required within three weeks of order placement. Prompt responses are crucial, as is the overall quality of the parts. In turn, the chosen supplier can expect to receive repeat orders once a relationship has been established.

  20. Drawings count: 1

    Machining-Milling, Low Volume

    Milling of free-issue aluminium plate, is required for the medical sector, on behalf of a company that spends a massive £500,000 a year on bespoke machined components. This is in order to produce the attached coil support, which is required in a batch of 20 off at this time. The successful supplier must be able to adhere to delivery within three to four weeks of order placement, as well as offering good value. In turn, the chosen vendor can expect to receive repeat orders for this design moving forward.

Pages