Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

108 Projects

Displaying 1 - 20 of 108

  1. Drawings count: 3

    Machining-Turning, High Volume

    This manufacturer of bespoke lighting, who outsources approximately £100,000 worth of machining per year, currently seeks the assistance of a supplier who can undertake the turning, chamfering and finishing required for production of the attached fibre-optic end caps. This forms part of a larger job for which the client is currently tendering, for which production is expected to commence in July, ready for August delivery.

  2. Drawings count: 1

    Machining-Turning, High Volume

    The attached clamp screw bodies are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products.

  3. Drawings count: 1

    Machining-Turning, High Volume

    Destined for use within the rail industry, the attached spacer is to be turned from stainless steel. The client requires 12,000 off of this item and would like to place the work with an external supplier who can offer a high standard of quality. This forms part of a larger job for which the client is currently tendering; if successful, there is a possibility that this could become an ongoing requirement. In addition, the buyer may look to place more of their £50,000 annual machining spend with the supplier that they choose for this project, once a relationship has been established.

  4. Drawings count: 3

    Machining-Turning, High Volume

    This manufacturer of climbing safety equipment, who currently undertakes most of their own manufacture in-house, is at capacity and seeks the assistance of a machinist who can aid with production of the attached bars for the duration of this contract. With an immediate order to place, this order will be repeated on a monthly basis going forward, over the next 12 months.

  5. Drawings count: 1

    Machining-Turning, High Volume

    The attached stainless steel damping needles will be utilised within a fastening application, on behalf of a company that spends over £250,000 a year on bespoke machining services. They seek quotes for large quantities of these components and would like to build a relationship with a supplier that can undertake repeat batches as required. A high standard of quality is essential, as well as good value. Interested vendors are asked to make contact with the buyer directly to be considered.

  6. Drawings count: 1

    Machining-Turning, High Volume

    This manufacturer of appliance controls is seeking a supplier who can assist with the machining of the attached connectors. The buyer behind this enquiry works within the appliance industry and has a sizeable outsourcing spend of £70,000 per annum on machining processes. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  7. Drawings count: 2

    Machining-Turning, High Volume

    This manufacturer of appliance controls is seeking a supplier who can assist with the machining of the attached nuts and bolts. The buyer behind this enquiry works within the appliance industry and has a sizeable outsourcing spend of £70,000 per annum on machining processes. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above.

  8. Drawings count: 1

    Machining-Turning, High Volume

    This manufacturer of automotive products seeks a supplier to manufacture the attached T-stud from stainless steel. This item has been supplied off-the-shelf previously; however, due to a lack of stock, it must now be made bespoke. Interested companies are asked to make contact at their earliest convenience, as the buyer has an immediate order to place for this work. This is one-off requirement which may, in turn, lead to additional machining opportunities.

  9. Drawings count: 1

    Machining-Turning, High Volume

    This manufacturer of climbing safety equipment, who currently undertakes most of their own manufacture in-house, is currently at capacity and seeks the assistance of a machinist who can aid with production of the attached bars. With an immediate order to place, delivery will be required by April 16th, with two more orders to follow by May 14th. Therefore, this enquiry will be ideally suited to those looking to fill capacity in the coming months.

  10. Drawings count: 4

    Machining-Turning, High Volume

    This buyer, a lighting manufacturer spending approximately £100,000 a year on outsourced machining, seeks assistance from a supplier who is able to produce the attached aluminium components. The project calls for which a mixture of turning, tapping and countersinking of a "heat sink" and "main body". Although this is a one-off requirement, the successful supplier will be invited to quote on similar work in the future once a partnership has been cultivated.These items are part of a larger project the client is currently tending for,therefore, suppliers able to offer a speedy response will be seen favorably.

  11. Drawings count: 7

    Machining-Turning, High Volume

    This manufacturer of agricultural and farming equipment is currently looking for a UK supplier to take on the manufacture of the the attached range of shafts, rollers, and caps - a mixture of newer and older parts that have previously been split between suppliers. There is an immediate order to place for these parts, which is to be repeated on a yearly basis. Owing to a respectable spend of £250,000 a year on outsourced machining, there may also be scope for suppliers to assist within additional enquiries moving forward.

  12. Drawings count: 1

    Machining-Turning, High Volume

    A supplier is needed to undertake the manufacture of high volumes of mild steel captive nuts destined for end use within the agricultural sector. The buyer has previously completed this work in-house however, due to lack of capability must now be subcontracted. Due to the high repeat volumes required this enquiry is best suited to those with sliding head capabilities.

  13. Drawings count: 2

    Machining-Turning, High Volume

    This manufacturer of marine equipment, seeks new supplier for a large selection of turned components. These are to be manufactured from a selection of aluminium, brass, bronze, mild steel and stainless steel. Quality and lead times are of paramount importance and therefore, suppliers who are able to offer reliability, whilst maintaining high quality and cost-effective pricing will be seen favorably.This client spends over £200k a year on outsourced machining therefore, the successful supplier will secure not only this project but also ongoing work moving forward.

  14. Drawings count: 2

    Machining-Turning, High Volume

    This buyer, a manufacturer of marine equipment, seeks new supplier for a large selection of turned components. These are to be manufactured from a selection of aluminium, brass, bronze, mild steel and stainless steel. Quality and lead times are of paramount importance and therefore, suppliers who are able to offer reliability, whilst maintaining high quality and cost-effective pricing will be seen favorably.

  15. Drawings count: 2

    Machining-Turning, High Volume

    A supplier is sought for the turning of a selection of stainless steel and aluminium components. The client, who spends in excess of £50,000 a year on outsourced machining, currently lacks the capacity to produce the parts in-house. This will become an ongoing requirement for the successful supplier, with all items increasing in volume over an annual period. Due to the high volume, ongoing nature of this enquiry, it is best suited to those with both long-term and immediate capacity to fill.

  16. Drawings count: 2

    Machining-Turning, High Volume

    This leading manufacturing company, specialising in lighting, spends in excess of £100,000 per annum on bespoke machined parts. They seek a new supplier to work alongside on a new project, which calls for the production of numerous aluminium components. The most important elements for this company are flexibility and reliability, with an emphasis on a high-quality, durable end product. There is no immediate order to place as of yet as they are quoting the work themselves; however, the buyer has advised that this will become an ongoing requirement moving forward, once an order has been confirmed.

  17. Drawings count: 1

    Machining-Turning, High Volume

    This client, whose annual machining spend exceeds £50,000, is looking for a supplier to produce the attached aluminium angle crank bolt which will be used in the industrial cleaning industry. This product is a new design - as such, a sample batch will be required before production batches can be placed.

  18. Drawings count: 1

    Machining-Turning, High Volume

    The attached stop screw is required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as good value, high quality end products.

  19. Drawings count: 1

    Machining-Turning, High Volume

    A new buyer to Qimtek - specialising in tow bars and bike rack equipment - seeks a supplier for the attached pivot pins, which will be used within a consumer goods application. This buyer spends £50,000 per annum on all outsourced fabrication services and would like to collaborate with a Qimtek member that can offer a good value, high quality end product. There is an order to place with the chosen supplier, with further orders to follow moving forward.

  20. Drawings count: 1

    Machining-Turning, High Volume

    This client is looking for a new supplier to make high volumes of the attached components, including valves, rods, pins and washers. Any finishing treatments shown in the drawings are not required. The client is looking for the best price on all these components, *all quotes sent must be inclusive of delivery*. The client will also accept part quoting if not all the components can be manufactured by one supplier. Quotes are required for between 200 off and 800 off each item and the client has also advised that this will be an ongoing requirement, making it an ideal opportunity to fill long-term capacity. In addition, there is scope for the chosen supplier to expand upon their involvement with the client moving forward.

Pages