Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

245 Projects

Displaying 1 - 20 of 245

  1. Drawings count: 6

    Machining-Turning, Low Volume

    This window manufacturer, who currently outsources approximately £100,000 worth of machining per year, is working on a large project in the United States and would like to hear from a machinist capable of manufacturing the attached frame rings. This order is a small part of the total number of rings that will be required throughout the project. There is an immediate order to place for this enquiry, with delivery sought at the supplier's earliest convenience. Similar sized rings will be required up until the end of March 2020.

  2. Drawings count: 1

    Machining-Turning, Low Volume

    This cryogenics research facility is currently in urgent need of quotations for the attached brass tails. Spending approximately £50,000 per year on outsourced machining, the client has advised that there is an immediate order to place for this enquiry. Although this is a one-off requirement, the chosen supplier may be asked to quote for projects of a similar nature going forward, once a relationship has been established.

  3. Drawings count: 2

    Machining-Turning, Low Volume

    This Qimtek member, whose annual outsourcing spend exceeds £10,000, currently seeks the assistance of a third party who can produce the attached pulley wheels. These items are to be turned from EN1A mild steel, with quotes currently sought for 5, 10 and 20 off. The client has advised that they will also extend similar projects to the successful supplier once a relationship has been established.

  4. Drawings count: 4

    Machining-Turning, Low Volume

    This manufacturer of agricultural and farming equipment is currently looking for a UK supplier to take on the manufacture of the attached turned components, which are new designs to be used as stock items within their machinery. There is an immediate order to place for this enquiry with the order to be repeated on a monthly basis going forward. Owing to the client's sizeable spend of £250,000 a year on outsourced machining, there may also be scope for suppliers to assist within additional enquiries moving forward.

  5. Drawings count: 3

    Machining-Turning, Low Volume

    This company has an order to place for these three new designs of thread and conduit adaptors, which are to be used within the electronics industry. Quotes are sought for 10, 25 and 50 off each design, with scope for additional work as well as this initial requirement. Pricing, quality and delivery on time are all key factors for this enquiry.

  6. Drawings count: 2

    Machining-Turning, Low Volume

    This client, who outsources approximately £25,000 worth of machining requirements each year, seeks a supplier with the capabilities to produce the attached turned roller bosses. There is an order to place for this enquiry with the possibility of ongoing work to follow.

  7. Drawings count: 5

    Machining-Turning, Low Volume

    This client, whose annual spend on machining services exceeds £90k is currently building a new machine to be used within the renewable energy sector and has an order to place for several turned parts, made from aluminium and mild steel. Quotes are required for 1 off each drawing, with additional opportunities for similar work once this initial enquiry is completed. Pricing, on time delivery and high-quality manufacture are all important elements of this project.

  8. Drawings count: 2

    Machining-Turning, Low Volume

    This manufacturer of agricultural and farming equipment is currently looking for a UK supplier to take on the manufacture of the attached turned components, which are stock items to be used in their machinery. There is an immediate order to place for one of these components, with the other to be ordered when stock is low. These are to be repeated going forward in line with stock requirements, which is expected to occur approximately 3 times per year. Owing to the client's respectable spend of £250,000 a year on outsourced machining, there may also be scope for suppliers to assist within additional enquiries moving forward.

  9. Drawings count: 2

    Machining-Turning, Low Volume

    This company urgently requests quotes for 4 off carrier assemblies to be used in a gear box. The lead time for completion of the work once the order is placed will be 2-3 months. This work was previously carried out in China, however, the buyer is keen to bring the work back to the UK. Quality, pricing and reliable delivery are all important considerations within this enquiry, with a quick turnaround on the initial quotation being crucial. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  10. Drawings count: 2

    Machining-Turning, Low Volume

    This designer and manufacturer of tooling solutions seeks a supplier to produce the attached bushes, along with the associated hardening and tapping. There is an immediate order to place for this enquiry, with delivery required by December 2nd. This is currently a one-off requirement, but may be repeated in line with customer orders going forward.

  11. Drawings count: 2

    Machining-Turning, Low Volume

    This Qimtek member currently seeks a supplier who is able to produce the attached mild steel tie rods. The client currently lacks the in-house capacity to produce these themselves and therefore, a supplier is eagerly sought for their immediate production. In addition, this has the potential to become ongoing work for the chosen supplier moving forward.

  12. Drawings count: 1

    Machining-Turning, Low Volume

    This manufacturer of yarn equipment and monitoring systems is currently in need of a supplier who can assist with the turning of the attached suction gun clip, to be used as a replacement for an older machine. They would therefore like to hear from possible Qimtek suppliers who can help. There is an immediate order to place for this enquiry, with delivery required at the supplier's earliest convenience. Although this is a one-off requirement, the chosen supplier may be asked to quote for additional, similar parts going forward, once a relationship has been established.

  13. Drawings count: 1

    Machining-Turning, Low Volume

    This manufacturer of special purpose machinery is looking for a supplier to carry out the production of a series of turned components . This project will involve aspects of turning, drilling and chamfering, with parts to be made from D2 tool steel. These parts are just a small sample of work subcontracted out by this company on a regular basis - as such, the client is looking to expand their supplier base for future batches.

  14. Drawings count: 3

    Machining-Turning, Low Volume

    This client, a manufacturer of eco-friendly automotives that spends £40,000 a year on outsourced machining services, currently seeks a supplier for the attached studs. These are to be made from EN16T/24T and will be used within the testing of electric vehicles. There are three different designs required in total, with batch sizes ranging from 20 to 110 off.

  15. Drawings count: 2

    Machining-Turning, Low Volume

    This client, a manufacturer of industrial machinery who spends £350,000 a year on outsourced machining, currently seeks a supplier for immediate production of the attached range of turned components. There is an immediate order to place for these parts and the client has advised that the chosen supplier will also be asked to quote for similar enquiries moving forward. Although this is currently a one-off requirement, these components are to be repeated in line with customer demand; however, the frequency may vary and is not known at this stage.

  16. Drawings count: 8

    Machining-Turning, Low Volume

    This cryogenics research facility is currently in need of quotations for the attached range of stainless steel and brass components, to be used within their research equipment. Spending approximately £50,000 per year on outsourced machining, the client has advised that there is an immediate order to place for this enquiry. Although this is a one-off requirement, the chosen supplier may be asked to quote for projects of a similar nature going forward, once a relationship has been established.

  17. Drawings count: 1

    Machining-Turning, Low Volume

    This designer and manufacturer of tooling solutions seeks a supplier to produce the attached components. These parts require turning, milling, drilling and chamfering and should be produced in a variety of materials. There is an immediate order to place, with the possibility of ongoing and additional work to follow moving forward.

  18. Drawings count: 1

    Machining-Turning, Low Volume

    This Qimtek member currently seeks a supplier who is able to produce the attached mild steel boss. The client currently lacks the in-house capacity to produce these themselves and therefore, a supplier is eagerly sought for their immediate production. In addition, this has the potential to become ongoing work for the chosen supplier moving forward.

  19. Drawings count: 1

    Machining-Turning, Low Volume

    This designer of bespoke furniture, who has a yearly outsourcing spend that tops £20,000, would like to hear from suppliers interested in assisting with the machining of the attached range of threaded components. This is currently a one-off requirement for a bespoke design, although it may lead to future orders of the same parts which will still be low quantities as they are order-driven. This project may also lead to additional enquiries of a similar nature for the chosen supplier, once a relationship has been established.

  20. Drawings count: 2

    Machining-Turning, Low Volume

    This client, a manufacturer of industrial machinery who spends £350k a year on outsourced machining, currently seeks a supplier for immediate production of the attached range of milled parts. There is an immediate order to place for the attached components, the client has advised that the chosen supplier will also be asked to quote on similar enquiries moving forward. Although this is currently a one off requirement, these components are to be repeated in line with their customer requirements; however, the frequency may vary and is not known at this stage.

Pages