Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

20 Projects

Displaying 1 - 20 of 20

  1. Drawings count: 4

    Plastic & Rubber-Injection Moulding

    This buyer currently seeks quotes for the attached carousel drive shot disperser. Although this design has traditionally been moulded, the client is open to suggestions regarding the best method of manufacture moving forward. There is an immediate order to place for 20 off of this design, which will be repeated on an ad-hoc basis. Suppliers who would like to be considered for this enquiry are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    This company is currently seeking best price and lead times for the attached Nylon 66 part. The buyer has advised that they already have the tooling and will free-issue this to the chosen supplier. Batch sizes for this part will range from 50 off up to 1000 off. Those who are interested in being considered for this project are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 4

    Plastic & Rubber-Injection Moulding

    Injection moulding suppliers are asked to advise on the attached manifolds. These parts are to be moulded from black tekapeek, ready for end use within the electronics sector. Vendors with the necessary capabilities are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 2

    Plastic & Rubber-Injection Moulding

    The attached product is a biodegradable sapling tree guard which is to be produced from PVC. The client requests quotes for 10,000 off of this design to be moulded in accordance with the drawings provided. Please note that the guard must be able to expand to a diameter of 15 centimetres, in order to protect the sapling trees throughout the early stages of their growth. In addition to the moulding element, interested suppliers are asked to provide a separate quotation for the applicable tooling. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 2

    Plastic & Rubber-Injection Moulding

    This Qimtek member is currently in need of assistance from suppliers interested in manufacturing the attached plastic components. At this point in time, this is a one off requirement, however this may be repeated in line with customer requirements going forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    Quotes are currently sought for the attached plastic component in batches of 1000 and 5000 off. The client has requested that an optically-clear plastic is used for its production and is open to suggestions regarding the best material to be used. As well as having an immediate order to place, the buyer has advised that this will be ongoing work, with annual volumes estimated to exceed 20,000 off.

  7. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    This buyer is currently looking for the best method of manufacture for a universal probe handle used widely in gas detection. Ideally they will be looking at having these manufactured in high volume (1000's). They will require a few prototypes and they may have redesigns during this process. The buyer is looking for a supplier that can work with them on the part as this will most likely lead to ongoing work. Please quote tooling quotes separate from the piece price.

  8. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    ** Please note- the buyer is looking for best method of manufacture and this project has been sent to Wood Machinists and Plastic Specialists** This design house are currently working on a new product and are seeking the best method of manufacture. A key part to this project is that the buyer requires the material used to be: 1. Sustainable (in this case - they are looking at environmentally friendly plastics) 2. Recyclable/eco-friendly as possible Please can you quote tooling costs separately.

  9. Drawings count: 3

    Plastic & Rubber-Injection Moulding

    This new buyer to Qimtek specialises in the manufacture of leading safety security systems. They seek a new supplier for the attached ABS top cases. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and a high quality durable end product. There is an order to place immediately with a supplier who can offer all of the above.

  10. Drawings count: 9

    Plastic & Rubber-Injection Moulding

    This manufacturer of washroom furniture is currently looking for potential suppliers who can assist with the ongoing production of the attached bathroom stools. Having already had samples manufactured abroad, the buyer is hoping for long-term production of the stools to be kept within the UK. Therefore, they would like to hear from suppliers who have the capabilities and capacity to assist on an ongoing basis.

  11. Drawings count: 2

    Plastic & Rubber-Injection Moulding

    This company is looking for quotes on the attached injection-moulded plastic insert. Quotes are sought for 1000, 5000 and 10000 off, with tooling also needed. These inserts are destined for use within a construction project which is commencing next month, meaning there will be an immediate order to place once the new supplier is found.

  12. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    This manufacturer of pneumatic tools currently seeks a supplier for the moulding of the attached top cap. This is to be produced from black/natural PC/ABS and supplied with a smooth quality finish. There is an order ready to place for 150 off. 500 off units are required each year, which may rise to 1000 off depending on product success.

  13. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    This client, a manufacturer of furniture and car equipment, spends a massive £600,000 a year on subcontract manufacture. They currently require quotes for the attached moulded component, which forms part of one of the buyer's main product lines; subsequently they will order 15,000 off per year. The successful supplier will secure not only this ongoing requirement, but will also be privy to additional opportunities of a similar nature.

  14. Drawings count: 6

    Plastic & Rubber-Injection Moulding

    This manufacturer of cameras and camera accessories is interested in hearing from suppliers who can assist with a new range of glass holders for both initial and ongoing production. There are various sizes required in the long term, but initially the buyer is looking for quotations on the largest size, with the manufacture of the smaller ranges to follow. Although there is no immediate order to place for this enquiry, the buyer is hoping to go to market with these parts at the end of September and therefore, the initial order is expected to be placed mid to late July. This is to be repeated on a yearly basis going forward.

  15. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    This regular Qimtek client is looking for a supplier to make a new design of black Nylon bung, which will be used within industrial cleaning equipment. Quotes are required for 1000 off with a view to repeat orders being placed, as well as an opportunity for similar work. Please note this enquiry has also been sent to plastic machining suppliers, in order to explore the viability of both processes.

  16. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    This security shutter manufacturer, who spends approximately £50,000 a year on outsourced plastic manufacture, is looking for a UK supplier of the attached plastic guide rails. There is an immediate order to place, although samples will be required before full production can commence. This part will be required on a repeat basis from the chosen supplier, meaning that the successful supplier will win a new long-term customer as well as the work in question.

  17. Drawings count: 4

    Plastic & Rubber-Injection Moulding

    Destined for end use within the automotive industry, these plastic caps are to be made from low density polyethylene. Quotes are required for 40,000 off each cap, with additional tooling also needed. The client has also advised that this will be an annual requirement, making it an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward. These parts are currently manufactured in Taiwan, although the client is keen to return production to the UK; therefore, pricing is an important consideration within this enquiry.

  18. Drawings count: 6

    Plastic & Rubber-Injection Moulding

    This university student, together with the the assistance of the university, has a project which is destined for use within under-developed countries with electricity supply issues. Suppliers are sought for both the initial and ongoing production of the attached plastic moulded parts, including a battery storage seat and a water storage seat. There is an immediate order to place, with delivery required at the supplier's earliest convenience. This is expected to be repeated every three months going forward, in hopefully increasing quantities.

  19. Drawings count: 2

    Plastic & Rubber-Injection Moulding

    This manufacturer of children's bicycles currently has a gap in their production plan whilst awaiting capacity from their regular supplier. Therefore, they are in need of a temporary supplier to assist with the injection moulding of rubber inserts. Tooling will be required, although supplier input for the best method is welcomed. Although this is a temporary requirement with two runs expected, this may lead to future enquiries for the chosen supplier once a relationship has been established.

  20. Drawings count: 2

    Plastic & Rubber-Injection Moulding

    This client is looking for injection moulded fixing blocks, using black PA66 material, for two separate components which will be used within the marine industry for recreational and rescue watercraft. Production quantities of 4500 off are required (per component) within the first 12-16 months. Please note that pricing and quality are of the most importance for this enquiry.