Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

72 Projects

Displaying 1 - 20 of 72

  1. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    Quotes for the manufacture of aluminium base plates and masts are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This client, a supplier and distributor of standard and special fasteners, seeks a supplier to produce the 4-hole tools to suit and match a security screw which has 4 drilled holes. The tool is required to match the 4 pins on the screws, as indicated in the attached drawing. If the buyer's customer decides to proceed, then the buyer will be able to send a screw sample, which can hopefully be reverse-engineered to suit. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This design house would like to work with a new supplier that is able to machine the attached buckle from solid brass. Destined for end use within consumer products, this item is initially required in a batch of 2 off, followed by further production runs of 100 off once the samples have been tested. This may make the enquiry especially well-suited to those that would like to expand their long-term customer base. The part in question is a new design and the client may also extend variants of this to the successful supplier in future. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This buyer, who operates within the bearing solutions industry, is currently seeking a supplier to manufacture the attached bearing cage. This is to made from titanium, with delivery sought by the end of May 2021. The client requests quotes and lead time indications for 150 off at this time. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This new buyer to Qimtek is looking for quotes on the attached 303 stainless steel Pins. The buyer has an order to place for this enquiry and has advised that this could lead to additional work for the successful supplier in future. Suppliers with the capacity to assist are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This buyer invites suppliers to quote for a selection of 25 parts, in batch sizes ranging from 3 off to 40 off. These components will be used within an industrial machinery application, with the project itself involving a number of different machining processes such as turning, milling and gear cutting. Suppliers who are interested in being considered for this enquiry are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This industrial machinery manufacturer, who spends in excess of £50,000 a year on bespoke machined components, is looking for a supplier to undertake production of the attached hex nuts. There is an immediate order to place and there may also be scope for the successful supplier to assist within additional projects, alongside this initial enquiry. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This fire suppression equipment manufacturer, who spends in excess of £150,000 a year on outsourced machining, would like to hear from interested parties regarding the ongoing production of the attached actuators. These are to be made from stainless steel and will be required on an ongoing basis, with orders expected to be placed approximately three times per year. This is expected to increase moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    Destined for end use within the agricultural industry, the attached hub is urgently required by a buyer that spends £50,000 a year on subcontract machining services. There is an immediate order to place, with the ideal supplier able to provide quotations by end of play Friday 12th February and delivery by Thursday 18th February. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  10. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    Specialising in the manufacture of valves and fittings for storage tanks, this buyer who spends approximately £30,000 each year on outsourced machining, is looking for potential suppliers of the attached shaft and arm designs to be used as stock components within their assemblies moving forward. With an immediate order to place for this enquiry, the buyer has explained that delivery is required by or around March 4th 2021. This is to be repeated approximately every year in similar quantities moving forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  11. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This Qimtek member has an immediate order to place for the attached 304 stainless steel flange, which is to be used within automotive exhaust systems. Quotes are sought for 300 off at this time, for which there is an immediate order to place. The client has also advised that this could develop into a repeatable requirement moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 3

    Machining-CNC Machining, Medium Volume

    Outsourcing approximately £250,000 worth of machining each year, this manufacturer of environmental technology is currently in need of a supplier to produce the attached valve holder on an ongoing basis. There is an immediate order to place for this enquiry which is repeated approximately every 18 months moving forward. The chosen supplier may also be asked to manufacture additional, similar components once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    Spending over £30,000 a year on subcontract machining services, this client specialises within the manufacture of valves and fittings for storage tanks. They currently seek a supplier for the production of a counter wheel spindle, with 100 off to be produced from stainless steel in accordance with the drawing provided. Delivery is required by 3rd March, meaning that this enquiry provides an opportunity for suppliers to supplement short-term workload. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  14. Drawings count: 4

    Machining-CNC Machining, Medium Volume

    This buyer is currently looking for a UK supplier to undertake production of the the attached stainless steel custom hose fittings, which are required for use within equipment for the construction industry. Please be aware that processes required for the production of these parts include turning, milling, drilling and threading. There is an urgent order to place for these designs, which could lead to repeat business for the successful company. Please be aware that the batch frequency may vary moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    The attached collars are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This manufacturer of medical supplies and equipment is looking to consolidate their outsourced manufacturing processes. In this instance, they would like to hear from machining suppliers who are capable of manufacturing the complete list of attached turned and milled components. The attached parts make up one set of components and the chosen supplier will be afforded the opportunity to quote for the manufacture of six additional sets of components once a relationship has been established. There is an immediate order to place for this enquiry, with repeat orders approximately every 2-4 months depending on stock levels. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  17. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This new buyer to Qimtek specialises in the manufacture of laboratory instruments. They currently seek a new supplier for the attached aluminium parts. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, competitive pricing, as well as a reliable delivery time of 6/8 weeks. There will be an order to place shortly with the chosen vendor, once production requirements have reached fruition. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  18. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This new Qimtek buyer is looking to develop and manufacture a bedroom light that works to improve sleep. This design to be made from a high quality oak. They are looking to work actively with a supplier to further develop the product and bring it to market. If a supplier is found, the client will look to order around 200 off initially, once the prototype has been approved, with further ongoing orders and projects to follow thereafter. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  19. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This buyer from a major pump manufacturer has a live order for a supplier to produce the attached sample part. This is required as part of an urgent project. They initially require quotes for 5 off and 10 off samples of the attached brass NRV seat, along with details surrounding possible lead times. Please note that a quick turnaround is required for these samples. Once the samples have been approved, the buyer will look to place an order for 250 off per year and therefore, suppliers are also asked to quote for the full production volume. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  20. Drawings count: 3

    Machining-CNC Machining, Medium Volume

    This manufacturer of paintball guns is seeking a supplier who can produce the attached parts from aluminium, in a batch of 250 off. The client is keen to establish a UK supply chain for this new design and would like to hear from Qimtek members who can assist. At this stage, they are hoping to establish contact with suppliers who are capable of undertaking the work. This will be an ongoing requirement, making it great opportunity to supplement your long-term customer portfolio. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

Pages