Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

53 Projects

Displaying 1 - 20 of 53

  1. Drawings count: 3

    Machining-CNC Machining, High Volume

    Quotes for the manufacture of aluminium twin clamps are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 1

    Machining-CNC Machining, High Volume

    This client, a supplier and distributor of standard and special fasteners, seeks a supplier for the production of the attached security pin. This is part of a project the client is tendering for which could lead to a high-volume order for the right supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 1

    Machining-CNC Machining, High Volume

    This design company is looking to partner with a machining supplier who can produce the attached package of components. This enquiry incorporates a large number of parts and encompasses a range of different materials including brass, stainless steel, copper, plastic and alloy steel. Initially, the client is looking to receive quotes for 20 and 330 off sets of parts for testing purposes; however, once full production is underway, these parts will be required to the tune of tens of thousands off per year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 1

    Machining-CNC Machining, High Volume

    This client, a supplier and distributor of standard and special fasteners, seeks a supplier to produce the attached mild steel nuts. These components require turning, milling and threading. This is part of a larger project the client is tendering for - should they win their tender, there will be an immediate order to place that could lead to ongoing work moving forward. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 1

    Machining-CNC Machining, High Volume

    The attached part is a tuning pin for a musical instrument, which is to be made from brass in accordance with the buyer's specifications. Having previously sourced this part from overseas, the client is now keen to return production to the UK in order to improve lead times. There is an immediate order to place for 500 off of this design and interested suppliers are asked to contact the buyer via email to be considered. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 1

    Machining-CNC Machining, High Volume

    Suppliers are currently sought to machine two different designs of mild steel tube ends, on behalf of a buyer who operates within the furniture industry and outsources over £200,000 worth of engineering work per year. The tubes will be free-issued to the successful supplier, ready for the required machining work to be carried out. The buyer has an immediate order to place for the work in question and has also advised that this will become an ongoing requirement moving forward. Suppliers who are interested in being considered for this enquiry are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 1

    Machining-CNC Machining, High Volume

    This is a great opportunity to work with a buyer who is new to Qimtek, who spends over £1 million on their outsourcing requirements per annum. The attached assembly drawing is of a manual override for a hydraulic pilot operated valve. This company fit thousands of these every year and this part is to replace the current version they purchase. It has been modified, as the current design is problematic to operate. Please note that this project went out to Plastic Machining suppliers on the 28th January; however, the buyer is keen hear from suppliers who can work with alternative materials. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 5

    Machining-CNC Machining, High Volume

    This buyer is new to Qimtek and is currently seeking quotes for the attached package of restrictors, which are an essential component used within one of their products. They will initially look to order 10 off samples followed by larger orders of 1000 off, up to an approximate total of 3000 off per year. Therefore, this project may be of particular interest to those who are looking to fill ongoing capacity and supplement their long-term customer base. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 1

    Machining-CNC Machining, High Volume

    This maintenance and fabrication manufacturer is currently on a repair job and is in need of a supplier to assist with the manufacture of the attached rivets. Although this is currently a one-off requirement, the buyer may place a larger order than required (price-dependent) and the chosen supplier may also be asked to assist within future requirements, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  10. Drawings count: 7

    Machining-CNC Machining, High Volume

    This manufacturer of oil and gas industry products is working on a new project, and would like to hear from UK suppliers who can produce initial samples of the attached components, as well as the ongoing production quantities required. There is an immediate order to place for this enquiry and once a site visit has been completed and the parts approved, this will be an ongoing requirement, with the full production quantities ordered on a repeat basis. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  11. Drawings count: 6

    Machining-CNC Machining, High Volume

    The attached main frames are inserts for a larger moulded and bonded part, which is currently being reshored on behalf of a company that spends £30,000 a year on subcontract machining services. The client requires quotes for between 5 off and 10,000 off sets of parts, with one of each of the three designs required per set. These are new parts which the buyer is looking to order in the near future; although the initial quantities will be small, the client has advised that they will increase production over the next twelve months. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 5

    Machining-CNC Machining, High Volume

    This manufacturer of appliance controls has a sizeable spend of £70,000 per year on subcontract machining services and is seeking a supplier who can assist with the machining of the attached brass parts. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 2

    Machining-CNC Machining, High Volume

    This manufacturer of greenhouses and diluters are currently seeking a new supplier to manufacture and supply the attached M6 square stainless steel nuts. These are currently produced overseas; however, due to a supply chain issue, a UK supplier is now eagerly sought. There is an immediate order to place with ongoing batches to follow, making this an excellent opportunity for those looking to fill ongoing capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  14. Drawings count: 4

    Machining-CNC Machining, High Volume

    This client, a research fellow at the University of Cambridge, urgently seeks a supplier to provide early-stage prices for the attached brass sprayer nozzles. The client is trying to get an understanding of the costs involved in ordering a very large quantity of these nozzles. Prices for a volume of 500,000 off are sought at this time. Although there is no immediate order to place, the buyer is hoping to move forward once they have a firmer understanding of the costs and lead times involved. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 6

    Machining-CNC Machining, High Volume

    This manufacturer of appliance controls is seeking a supplier who can assist with the machining of the attached brass parts. The buyer behind this enquiry works within the appliance industry and has a sizeable outsourcing spend of £70,000 per annum on machining processes. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 2

    Machining-CNC Machining, High Volume

    Suppliers are eagerly sought for the turning and drilling of the attached aluminum bar. These have previously been made in-house; however, the client is now looking to outsource this in order to free up capacity. There is an immediate order to place, with ongoing and additional work to follow.

  17. Drawings count: 2

    Machining-CNC Machining, High Volume

    This regular buyer to Qimtek has an urgent order to place for the attached helix design, which will be used within agricultural equipment. Quotes are sought for 500 off to meet the demands of a large customer order, with scope for repeatable and ongoing work to follow for the chosen supplier once a relationship is established. A fast turnaround and reliable delivery are important factors within this enquiry.

  18. Drawings count: 1

    Machining-CNC Machining, High Volume

    This Qimtek member has an immediate order to place for this design of ball seat which will be used within industrial machinery. Quotes are sought at this time for an initial order of 100 off and 200 off. This project incorporates machining processes as well as a hardening treatment, which is optional. The initial order will be for 100 or 200 off which is an urgent requirement so should a suitable quote arrive quickly, this project will be awarded early. Higher batch sizes of 500, 1000 and/or 2000 off will be ordered after the initial order is completed.

  19. Drawings count: 2

    Machining-CNC Machining, High Volume

    This start-up company has an order to place for these designs of barrel, which will be used within paintball guns. Quotes are required for 200 off and 1500 off. The ideal supplier will be able to quote economically and provide a highly accurate end product in accordance with the tolerances provided. Once a relationship has been established, further projects could be made available in addition to this initial requirement.

  20. Drawings count: 1

    Machining-CNC Machining, High Volume

    This telecommunications manufacturer currently seeks quotes for the attached package of components, comprising part of a project for which they are currently tendering. The client has advised that they would like to receive quotes for these components to be machined, in quantities ranging from 10 off to 1000 off. Some of the parts are common to other assembly projects for which the client is currently quoting; in addition, they have advised that this could lead to additional opportunities for the successful supplier once a relationship has been established.

Pages