Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

390 Projects

Displaying 1 - 20 of 390

  1. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fold the attached 4.5mm o/p durbar plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  2. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fold the attached angles for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  3. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fold the attached top treads for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  4. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This company operates within the construction industry and seeks a new supplier to cut the attached main trays. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately for the specified batches of this design, with ongoing work available for the chosen supplier. Therefore, this enquiry will be an ideal match with those who are looking to fill long-term fabrication capacity.

  5. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut, fold & countersink the attached chequer plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  6. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fold the attached treads and landing plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  7. Drawings count: 3

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    A Qimtek member who is currently overloaded has a requirement that is outside of their in-house capabilities. They are looking to work with an external supplier who has the capacity to fabricate brackets on their behalf. The client has advised that they may have similar projects throughout 2020/21, with which the successful supplier will be asked to assist.

  8. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fold the attached 5mm thick angles for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  9. Drawings count: 4

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This design house is seeking quotes for cut and folded spars and brackets which will be used within the construction industry. Because these are new designs, quotes are required for 1 off and 2 off of each drawing which will be ordered initially, and also for 10, 50, 100 and 500 off of each part in preparation for full production. The ongoing nature of the work makes it ideal for those seeking a long-term relationship with a new client.

  10. Drawings count: 3

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This buyer, a supplier of machine tools and equipment, currently seeks a supplier to manufacture the attached guard segments. These are to be produced from carbon steel and require cutting, folding and welding The client is looking to collaborate with a company that can produce these designs to a high standard of quality, whilst also offering reliable delivery and good value. Those that are interested in being considered for this project are asked to make contact with the buyer directly to discuss.

  11. Drawings count: 10

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    A Qimtek member who is currently overloaded has a requirement that is outside of their in-house capabilities. They are looking to work with an external supplier who has the capacity to fabricate leg frames for double beds on their behalf. Although this is a one-off requirement, the client has advised that they may have a similar project in the near future, with which the successful supplier will be asked to assist.

  12. Drawings count: 4

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut, fold & countersink the attached plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  13. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fold the attached set of 3mm & 4.5mm thick top treads for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  14. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fold the attached set of 4.5mm thick chequer plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  15. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    With an impressive outsourcing spend of over £1 million per year on fabricated designs, this company has an order to place for these 4 assemblies of drum seal components which will be used within the energy sector. This is an updated design of legacy parts. Quotes are required for 1 off and 3 off assemblies as directed, with ongoing work also possible once a relationship is established. Pricing and quality are important, however, delivery is of priority, with the assemblies ideally to be delivered by 11th November, or as close as possible to this date.

  16. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This company operates within the consumer products industry and outsources over £500,000 worth of fabrication work every year. They have an order to place for a new anti-vandal bar design to be used within one of their existing storage products. This project incorporates elements of fabrication and powder coating, with quotes required for 20 off and 50 off. The ideal supplier will be able to produce these parts economically and once a relationship has been established, further orders with repeatable batches could be made available, in addition to this initial requirement. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or caroline.ogden@qimtek.co.uk. Alternatively, please fax your NDA to 01256 394600.

  17. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This manufacturer of secure building and security installations, is currently looking to increase their supply base for the attached components. Spending approximately £100,000 each year on outsourced fabrication, the buyer has immediate order for the attached range, and will have a range of additional components made available to the chosen supplier which is all to be repeated in larger quantities approximately every 3 months.

  18. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fold the attached set of 3mm & 4.5mm thick durbar plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  19. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as a suitable supplier is found. The chosen supplier will be required to cut & fold the attached 4.5mm thick durbar plates for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer a good quality product, as well as a fast turnaround, will be seen favourably.

  20. Drawings count: 5

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This manufacturer of building security is currently looking for additional suppliers to assist with the manufacture of the attached range of guide brackets. Outsourcing approximately £100,000 worth of fabrication each year, the buyer has an immediate order to place for this enquiry which is to be repeated every 2-3 months going forward. Once a relationship has been established, this may lead to additional enquiries of a similar nature for the chosen supplier.

Pages