Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

62 Projects

Displaying 1 - 20 of 62

  1. Drawings count: 3

    Fabrication-Tube Bending & Manipulation

    This client, a manufacturer and distributor of agricultural, construction and environmental equipment, currently seeks a supplier to produce the attached mild steel frames. There is an immediate order to place for this enquiry, with the possibility of ongoing work to follow. The ideal supplier will be able to produce the completed frame in-house, including a small amount of machining; however, quotes for just the fabricated tube sections would be acceptable.

  2. Drawings count: 6

    Fabrication-Tube Bending & Manipulation

    Spending in excess of £50,000 a year on subcontract fabrication services, this company urgently seeks a supplier who is able to produce the attached tube sections. These are to be made from S355JO and require cutting, drilling and bending for completion. There is an immediate order to place for this enquiry and interested parties are asked to quote their best price and lead time when providing a quotation.

  3. Drawings count: 6

    Fabrication-Tube Bending & Manipulation

    This architectural company has been asked to replace an existing handrail which has broken and therefore, they require the assistance of a supplier who can manufacture and install the attached design. There is an immediate order to place for this enquiry, with delivery required at the chosen supplier's earliest convenience. This is a one-off requirement, although it may lead to additional, similar enquiries once a relationship has been established.

  4. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This Qimtek member, a machining supplier, is in need of an urgent response and immediate manufacture of the attached swaged nozzle. This is currently a one-off requirement with delivery required by February 28th; however, the chosen supplier may be asked to manufacture this part again in the future, although it is not ordered regularly.

  5. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This buyer is part of a university's formula racing student team and has an immediate order to place for a front roll hoop for their car, which is being built from scratch by the students. At the heart of the team is a passion for motorsport and pursuing engineering excellence, with a drive to continuously improve the team's track performance and develop themselves as professionals. Sponsorship has also been offered if a discounted rate is available for the work, consisting of benefits such as car sponsorship, social media posts, team garage boards, etc. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven, as a new car is built from scratch every year.

  6. Drawings count: 4

    Fabrication-Tube Bending & Manipulation

    This client, a supplier of product design and project management services, seeks the assistance of a tube bending specialist to produce the attached bars. These are to be made from mild steel, with quotes required for batches of 1, 5 and 200 off of each item. There is an immediate order to place and ongoing work likely to follow, making it an excellent opportunity for those looking to fill both immediate and ongoing capacity.

  7. Drawings count: 7

    Fabrication-Tube Bending & Manipulation

    This supplier to a range of industries across the world is looking for additional suppliers for the attached tube components. These are to be cut and bent in accordance with the drawing provided; subsequently, the client would like to hear from interested Qimtek suppliers. With an immediate order to place for this enquiry, which is to be repeated approximately every two months, the buyer has also advised that the chosen supplier will be asked to quote and manufacture additional components of a similar nature.

  8. Drawings count: 3

    Fabrication-Tube Bending & Manipulation

    This manufacturer of medical and disability products is currently looking for a turnkey supplier of the attached tubes. There is an immediate order to place for this enquiry, with samples required before full production can commence. This is to be repeated in line with project requirements, which is estimated to be two or three times per year.

  9. Drawings count: 4

    Fabrication-Tube Bending & Manipulation

    This buyer is looking for a supplier to manufacture these designs of pipe and tube, which will be used within the construction industry. Quotes are sought for 10 off and 200 off, with repeat orders of approximately 200 off per year for each part. Pricing, quality and reliable delivery are all important elements of this enquiry and once all the quotes are collated, an order will be placed shortly afterwards. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  10. Drawings count: 3

    Fabrication-Tube Bending & Manipulation

    This company is looking for a supplier to manipulate stainless steel tube to the shape shown within the drawing provided. The tube will be used as an exhaust pipe for remote control aircraft. The buyer has suggested swaging as the best method of manufacture, however, any other suitable method is acceptable. This may include sheet forming of two halves to be welded together, or the halves delivered unwelded. Quotes are required for 100 off for the first batch, followed by 100 off annually going forward. Pricing and quality are of the utmost importance for this enquiry.

  11. Drawings count: 6

    Fabrication-Tube Bending & Manipulation

    Destined for use as consumer products, these upper and lower tricycle forks are to be made from mild steel, on behalf of a company that spends over £60,000 per year on bespoke fabricated designs. Quotes are required for 500 off each fork, either as a single delivery, or split into 3 calls-offs over a 6 month period. The client has also advised that this will be an ongoing requirement, making it an ideal opportunity to fill long-term capacity. The ideal supplier will be able to provide a high-quality end product and produce these parts economically; once a relationship has been established, further projects could be made available in addition to this ongoing requirement.

  12. Drawings count: 2

    Fabrication-Tube Bending & Manipulation

    This client, a manufacture of custom motorcycles, seeks the assistance of a supplier with tube bending and cutting capabilities. The attached component represents a small cross section of the ongoing work that will be made available to the successful supplier, with quotes required for 200 off per month of this particular design. The buyer is looking to form a partnership with suppliers who can offer excellent customer service and high quality manufacture.

  13. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This medical equipment manufacturer, who outsources approximately £100,000 worth of fabrication each year, is currently looking for quotes from prospective suppliers who can assist with the immediate manufacture of the attached range of mild steel components. There is an immediate order to place for this enquiry and although this is a one-off requirement for this range of components, the chosen supplier may be asked to produce additional, similar parts going forward.

  14. Drawings count: 5

    Fabrication-Tube Bending & Manipulation

    Outsourcing fabrication work to the tune of over £50,000 every year, this company is currently seeking a supplier who can manufacture the attached trolley, which was previously made overseas. The buyer has an order ready to place for its production and is considering batch sizes of 10 off, 50 off and 100 off, with repeat orders going forward. Pricing is of particular importance and will lead to repeat orders once a supplier is found. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  15. Drawings count: 4

    Fabrication-Tube Bending & Manipulation

    This manufacturer of sports cars is looking for a supplier with tube bending capabilities, in order to undertake production of the attached selection of mild steel components. Quotes are sought for 25 off of each design, which are to be supplied complete to the drawings provided. Those that are interested in being considered for this project are asked to make contact via email initially, before making a telephone call to the buyer to follow up. This has the potential to become ongoing work for the chosen supplier, meaning that it may be of particular interest to those who are looking to expand their long-term customer portfolio. There may also be scope to develop the relationship, as the client spends over £150,000 a year on bespoke fabricated components.

  16. Drawings count: 3

    Fabrication-Tube Bending & Manipulation

    This manufacturer of contemporary light fittings is in need of a supplier who can assist with the fabrication, drilling, and tapping of the attached tube. With an immediate order to place for the prototype run - which is to be followed by a full volume order if successful - this part is expected to be repeated on a quarterly basis going forward, although the frequency may vary in accordance with stock requirements.

  17. Drawings count: 2

    Fabrication-Tube Bending & Manipulation

    This buyer, a company that produces reaching aids and spends £100,000 a year on subcontract fabrication, seeks a supplier to manufacture a large range of tube and box section components. These are currently produced in-house; however, the client wishes to test the feasibility of outsourcing their manufacture. This project incorporates aspects of tube bending, cutting and a small amount of machining, representing only a small cross section of the total work available to the successful supplier. Interested parties are asked to quote their best price and lead times - should a suitable quote be received, this will develop into both ongoing and additional work for the successful vendor.

  18. Drawings count: 2

    Fabrication-Tube Bending & Manipulation

    This client, a shopfitting company that spends an impressive £250,000 annually on subcontract services, seeks a supplier to produce the attached table frames. There are several different designs and the buyer requires the assistance of a supplier who is able to facilitate manufacture of the initial prototypes, along with the sizeable production run that is to follow. This makes it a great opportunity to form a long-term collaboration with the client in question. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  19. Drawings count: 3

    Fabrication-Tube Bending & Manipulation

    This manufacturer of British sports cars seeks a supplier with the capabilities to produce the attached bulkhead tube and chassis rail. Suppliers are asked to quote for 25 off of each item, which require tube laser cutting and bending. The buyer's spend on subcontract fabrication processes exceeds £150,000 per year and therefore, the chosen supplier will be given the opportunity to develop an ongoing relationship and assist within further projects moving forward.

  20. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This client seeks assistance from a supplier who is able to offer assistance within the manufacture of the attached seat frame. This design is to be produced from 6005A-T6 aluminium alloy and is destined for end use within the aerospace industry. Quality is paramount; suppliers who are able to offer competitive pricing, whilst maintaining a high standard of manufacture, will be seen favourably.

Pages