Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

71 Projects

Displaying 1 - 20 of 71

  1. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    This shopfitting specialist has received an immediate order for the attached display tables and would like to hear from Qimtek suppliers who are capable of producing the metalwork required. Currently outsourcing approximately £40,000 worth of fabrication each year, the buyer has an immediate order to place for this enquiry. This is a one-off requirement, although the chosen supplier may be asked to assist within additional, similar project going forward.

  2. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to laser cut & fabricate the attached posts for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  3. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    Destined for end use within the construction industry, these shelf brackets are to be cut, folded and welded using mild steel, on behalf of a company that spends over £100,000 per year on bespoke fabricated designs. Quotes are required for 1 off pair for testing, followed by 92 off pairs - the client has also advised that this will be an ongoing requirement. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  4. Drawings count: 3

    Fabrication-Light Fabrication (under a tonne)

    With a spend of over £100,000 on bespoke fabrication work, this buyer has an order to place for the attached cooling inlet which is to be fabricated, welded, machined and assembled. Powder coating is not required as this will be completed by the buyer at the last stage. Quotes are required for 1 off which will be ordered as a test to check quality. This will be followed by an order of 200 off which is approximately a 2-3 month supply, with further orders of 200 off to be placed 4-6 times per year going forward. This marks an excellent opportunity for regular fabrication work with a new buyer and may also lead to further opportunities. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  5. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    With an outsourcing spend of over £100,000 per year on bespoke fabrication work, this company has an order to place for the attached brackets which will be used within a retail environment. Quotes are required for 10 off at this time, with a view to placing future orders with the chosen supplier. Pricing is a key element within this enquiry. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss. The buyer has also confirmed that should a suitable quote arrive quickly, the work will be awarded early. In addition, this could result in further opportunities once quality and reliability have been proven.

  6. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    With an outsourcing spend of over £100,000 per year on bespoke fabrication work, this company has an order to place for the attached brackets which will be used within a retail environment. Quotes are required for 40 off at this time, with a view to placing future orders with the chosen supplier. Pricing is a key element within this enquiry. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss. The buyer has also confirmed that should a suitable quote arrive quickly, the work will be awarded early. In addition, this could result in further opportunities once quality and reliability have been proven.

  7. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    With an outsourcing spend of over £100,000 per year on bespoke fabrication work, this company has an order to place for the attached brackets which will be used within a retail environment. Quotes are required for 13 off at this time, with a view to placing future orders with the chosen supplier. Pricing is a key element within this enquiry. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss. The buyer has also confirmed that should a suitable quote arrive quickly, the work will be awarded early. In addition, this could result in further opportunities once quality and reliability have been proven.

  8. Drawings count: 3

    Fabrication-Light Fabrication (under a tonne)

    With an annual spend of over £100,000 on bespoke fabrication work, this design and installation company has an order to place for floor stand brackets, as well as a duct and fan bracket which will be used within the construction industry. Quotes are sought for 2 off floor stand brackets and 1 off of each of the duct and fan brackets; all of these parts are to be supplied galvanised. Lead time and pricing are the most important considerations within this enquiry and there is also scope for additional, ongoing work once the initial enquiry is completed.

  9. Drawings count: 6

    Fabrication-Light Fabrication (under a tonne)

    With an outsourcing spend of over £100,000 per year on bespoke fabrication work, this company has an order to place for the attached shelf brackets which will be used within a retail environment. Quotes are required for 7 off at this time, with a view to placing future orders with the chosen supplier. Pricing is a key element to this enquiry. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss. The buyer has also confirmed that should a suitable quote arrive quickly, the work will be awarded early. In addition, this could result in further opportunities once quality and reliability have been proven.

  10. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    IMMEDIATE CAPACITY SOUGHT FOR URGENT PROJECT! This buyer, who has a massive £350,000 annual spend on subcontract fabrication work, seeks a supplier with immediate capacity who can undertake an urgent project on their behalf. A prompt response is vital as due to its urgency, this project will be awarded as soon as the right supplier is found. The chosen supplier will be required to fully fabricate the attached plinths for use within the construction industry. This company regularly has urgent enquiries of a similar nature and therefore, those who respond promptly and can offer good quality, as well as a fast turnaround, will be seen favourably.

  11. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    This international sourcing company seeks a UK supplier who can assist with the manufacture of the attached stillages for their end client in Australia. Although there is no immediate order to place, the client is looking to set up the supply chain before progressing - once this has been completed, the order will follow. This is to be repeated on an ongoing basis, with a total requirement of 2000 off stillages per year.

  12. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    Folding, bending & cutting of frames is needed, on behalf of a construction buyer with a sizeable £300,000 annual spend on outsourced fabrication work. The attached frames are for an internal table leg and need to be supplied with a smoothed finish. The client is keen to partner with a supplier of this design, of which they expect to order 1 off - if the performance is successful, there will be a further order. This makes it a potentially substantial project for the right supplier. Those that have the required capabilities and the ongoing capacity available are asked to make contact with the buyer to express their interest, quoting their best price and lead time.

  13. Drawings count: 8

    Fabrication-Light Fabrication (under a tonne)

    A Qimtek member who is currently overloaded has a requirement that is outside of their in-house capabilities. They are looking to work with an external supplier who has the capacity to fabricate tables and stools on their behalf. The client has advised that they may have similar projects throughout 2020 with which the successful supplier will be asked to assist.

  14. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    This client, a manufacture of custom motorcycles, seeks the assistance of a supplier with the capabilities to produce the attached exhaust silencer. This project incorporates a range of manufacturing processes including cutting, rolling and bending. The attached component represents a small cross-section of the ongoing work that will be made available to the successful supplier, with quotes required for 300 off pairs of this particular design per year. The buyer is looking to form a partnership with suppliers who can offer excellent customer service and high quality manufacture.

  15. Drawings count: 5

    Fabrication-Light Fabrication (under a tonne)

    This client, a manufacturer of medical care equipment who spends £1million a year on subcontract fabrication services, currently seeks a supplier to provide a quotation on the attached bed frame. This comprehensive enquiry involves aspects of cutting, folding, bending, welding and powder coating. Once project feasibility has been confirmed, the successful supplier will secure not only the ongoing production of this assembly, but also additional, similar opportunities moving forward. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  16. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    The company behind this enquiry, a manufacturer of heating and chilling equipment who spends £100,000 annually on subcontract manufacture, seeks a supplier to aid with production of the attached bulk head fitting. There is an immediate order to place for the work in question, which will become an ongoing requirement moving forward.

  17. Drawings count: 3

    Fabrication-Light Fabrication (under a tonne)

    This client, a manufacture of medical and scientific equipment who spends £50,000 a year on subcontract fabrications, currently seeks a new partner to produce frames on their behalf. Attached is an example of their most recent order placed for their medium-sized framework - there is no immediate order to place for this enquiry; however, the successful candidate will become an ongoing supply partner to this client and will be required to produce similar framework on an ongoing basis.

  18. Drawings count: 3

    Fabrication-Light Fabrication (under a tonne)

    This company specialises in marquee accessories, and has an order to place for a zinc-plated mild steel clamp which is used within the marquees themselves. The buyer is looking for a cost reduction after an increase in price from their previous supplier. Monthly orders will be placed, making this an ideal enquiry for those seeking regular work. Quotes are sought for 100, 200 and 300 off per month and once a supplier is chosen, this will lead to regular monthly orders on an ongoing basis in this type of quantity. Pricing is of the most importance within this enquiry, as is the ability for the clamp to withstand 250kg, which is essential.

  19. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This kennel manufacturing company is currently looking for a supplier who can assist with the immediate - as well as ongoing - production of the attached range of components. Currently outsourcing approximately £100,000 worth fabrication work annually, the client has advised that there is an immediate order to place for the initial quantity indicated, as well as ongoing work repeated in line with customer orders.

  20. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This shopfitting specialist has had a new order for the attached gondolas and would like to hear from turnkey suppliers who are capable of the producing these units complete. Currently outsourcing approximately £80,000 worth of steel and wood fabrication each year, the buyer has an immediate order to place for this enquiry. This is a one-off requirement, although the chosen supplier may be asked to assist within additional, similar project going forward.

Pages