Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

23 Projects

Displaying 1 - 20 of 23

  1. Drawings count: 1

    Machining-Gear Cutting

    The attached component is required by this industrial machinery manufacturer. They seek quotes for 100 off, for which there is an immediate order to place and additional batches to follow. Interested suppliers are asked to make contact with the buyer via email at this time.

  2. Drawings count: 2

    Machining-Gear Cutting

    This fabrication supplier, who outsources approximately £85,000 worth of machining each year, is in need of a supplier for the attached sprocket for a good client of theirs. This is outside their normal requirement and will be a one-off order, although the chosen supplier may be asked to quote and manufacture additional components going forward, once a relationship has been established.

  3. Drawings count: 2

    Machining-Gear Cutting

    This regular buyer to Qimtek has an order to place for these sets of gears, which are to be used within the energy sector. Quotes are required for 150 off, which will be ordered as a blanket order with an initial call-off of 30 off sets in early September, followed by monthly call-offs of 15 off sets every month except December and January, ending in July 2021. This will be a good opportunity for a supplier looking for regular work with an established company. Pricing, quality and on-time delivery are all key requirements within this enquiry.

  4. Drawings count: 0

    Machining-Gear Cutting

    At this early design stage of the project, this company is looking for a supplier who can make a short run of differentials/half shafts for a design of trike which will be converted from a motorbike, using a differential design very similar to that of a three-wheeled car. The engine will be 60 brake horsepower and the differential is to weigh approximately 40kg in total. This project will suit members with gear cutting capabilities. Although this project calls for 1 off to be quoted, the buyer is currently looking for expressions of interest rather than quotations at this time. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  5. Drawings count: 2

    Machining-Gear Cutting

    This manufacturer of conveyor systems is currently quoting for a new system and would like the assistance of a supplier who can produce the attached pulleys. This company currently spends over £100,000 a year on subcontract machining services and although this is currently a one-off requirement, it may be repeated in line with client orders moving forward.

  6. Drawings count: 5

    Machining-Gear Cutting

    This manufacturer, who pioneers the development of autofocus lenses and currently spends approximately £500,000 on outsourced machining each year, would like to hear from suppliers who can assist with both the cutting of the attached free-issue parts to the required length, as well as companies who can manufacture the end requirement from scratch. The buyer is taking delivery of the initial order at the end of October and will have an immediate requirement to have them cut to length. This initial requirement is a prototype, but this is to be repeated in increasing quantities going forward, in line with sales requirements. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  7. Drawings count: 1

    Machining-Gear Cutting

    A Qimtek member who spends in excess of £15,000 a year on machining services has a requirement that is outside of their in-house capabilities. They are looking to work with an external supplier who has the capacity to machine pinion gears on their behalf. Although this is a one-off requirement, the client has advised that they may have a similar requirement in the near future, which which the successful supplier will be asked to assist.

  8. Drawings count: 2

    Machining-Gear Cutting

    The assistance of a new supplier is required by this company, who spend over £100,000 a year on subcontract machining. They require internal helical rings which will need to be cut by a third party, for end use within sweet wrapping machinery for the food & beverage industry. This is an ongoing requirement, making it ideal for companies that would like to supplement their long-term customer portfolio.

  9. Drawings count: 1

    Machining-Gear Cutting

    An ongoing production partner is sought to assist with the gear cutting and machining of the attached chain link. Destined for use within a range of bicycles, this is only one part from the total set that will be required; the drawings for the remaining parts will be issued to the chosen supplier after samples have been received and the quality approved. There is an immediate order to place for this enquiry, which is expected to be repeated in larger volumes going forward, in line with sales requirements.

  10. Drawings count: 1

    Machining-Gear Cutting

    This buyer, a manufacturer of British sports cars, seeks the assistance of a supplier with the necessary capabilities to produce a new design of steering column spline. Quotes are required for batches of 15 off at this time. Owing to the buyer's impressive £500,000 annual machining spend, the chosen supplier will be given the opportunity to develop an ongoing relationship and assist within further machining projects moving forward.

  11. Drawings count: 2

    Machining-Gear Cutting

    This new buyer to Qimtek has an order to place for the manufacture and assembly of the attached gears and cutters. which will be used as part of machinery for the food and beverage industry. These were previously made using additive manufacturing processes as one whole piece, however, the printed materials used were not food grade, which is now essential. Quotes are required for 1 off, 50 off and 100 off assemblies. A low number of sets will be ordered initially but once tested and approved, this will lead to higher volumes once full production is underway. Delivery of the first batch within 2 weeks ideally is important, although if it takes a little longer, this will be accepted. Quality and accuracy is critical for these components. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  12. Drawings count: 4

    Machining-Gear Cutting

    This client, a manufacturer of ramps who spends £100,000 a year on subcontract machining services, requires quotes for the attached bevel gears. There is an immediate order to place for 100ff and 200ff with delivery required by 09/09/2019. This is an excellent opportunity for those looking to add a high spending account to their customer portfolio. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  13. Drawings count: 1

    Machining-Gear Cutting

    This manufacturer of bag packaging equipment, who outsources approximately £350,000 worth of machining each year, is in urgent need of a supplier who can assist in the immediate manufacture of the attached pulley gears. There is an immediate order to place for the initial quantity: required for a presentation, and the potential for ongoing batches moving forward.

  14. Drawings count: 3

    Machining-Gear Cutting

    This client urgently seeks quotes for 3 off of the attached mandrels, top plates and bottom plates, which are destined for end use within the motor and generator industry. This enquiry incorporates aspects of milling, drilling, turning and gear cutting. This is currently a one-off requirement; however, it could also lead to ongoing work of a similar nature moving forward, once the initial order has been placed.

  15. Drawings count: 2

    Machining-Gear Cutting

    A new buyer to Qimtek, who specialises in the manufacturing of high security gates, seeks a new supplier who can fulfil initial and future requirements for the attached Nylon gears. With an immediate order to place for this enquiry, the work is expected to be repeated as the client introduces this part across their applications and products. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  16. Drawings count: 1

    Machining-Gear Cutting

    This buyer, a manufacturer of British sports cars, seeks the assistance of a supplier with the necessary capabilities to produce a new design of oil pump gear. Quotes are required for batches of 5, 10 and 25 off at this time. Owing to the buyer's impressive £500,000 annual machining spend, the chosen supplier will be given the opportunity to develop an ongoing relationship and assist within further machining projects moving forward.

  17. Drawings count: 1

    Machining-Gear Cutting

    This company is currently over capacity and is therefore looking to subcontract the attached gear cutting work on behalf of their client. Quality and pricing are of the utmost importance, with an order to place very soon. The end user has not yet provided the client with a delivery lead-time requirement; therefore, please quote your best price and lead time. The ideal supplier will be able to produce these parts economically and provide a high-quality end product - once a relationship has been established, further projects could be made available in addition to this one-off requirement.

  18. Drawings count: 1

    Machining-Gear Cutting

    Destined for use within the electronics industry, the attached pulley is required by a manufacturer of scanning equipment, who spends an average of £100,000 a year on outsourced machining. There is an immediate order to place for this enquiry, which is expected to be repeated each year in similar quantities. Therefore, this is an opportunity to win a new long-term customer, as well as the work in question.

  19. Drawings count: 3

    Machining-Gear Cutting

    This client is looking for a new supplier to manufacture these Acetal gears wheels as part of a brand new project for the food & beverage industry. Once the project is firmly underway, this will lead to repeat orders, although the volumes and frequency will be confirmed later. Owing to initial delivery being required within 6-8 weeks of order placement, this is therefore a great opportunity to fill both short and long-term capacity. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  20. Drawings count: 1

    Machining-Gear Cutting

    This leading manufacturing company, who specialise in the design and manufacture of illumination & detection products, seeks a new supplier to work alongside for production of the attached aluminium pulleys. The ideal supplier will be able to offer good value, as well as a high quality end product. There is an immediate order to place from the buyer in question, who spends in excess of £350,000 a year in the subcontract machining sector.

Pages