Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

380 Projects

Displaying 1 - 20 of 380

  1. Drawings count: 1

    Machining-Turning, High Volume

    This electronics buyer is looking to source a new supplier for the production of stainless steel air nipples. They have an immediate order to place for 4000 off, as shown in the attached drawings. The chosen supplier will also be given the opportunity to undertake repeat orders, occurring every six to twelve months. The buyer outsources machining work to the tune of £50,000 annually, meaning that there is plenty of scope for the successful supplier to develop the relationship further. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 1

    Tool Making-Jigs & Fixtures

    This company currently seeks price and lead time indications for the attached set of jigs. This project incorporates a range of parts, which are to be made from a variety of materials. The client has requested that suppliers specify their earliest delivery date within their quotation. There is an immediate order to place for this enquiry, making it an ideal opportunity to fill imminent capacity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 7

    Machining-Turning, Low Volume

    The attached set of parts, including flanges, adaptors and clamp rings, is required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. There is an immediate order to place with the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 1

    Plastic & Rubber-Plastic Fabrication

    This buyer is new to Qimtek and has a new project to manufacture for a personal hobby. This project consists of 3 off 1.5mm thick white HIPS and 3 off 1.5mm clear acrylic sheets, which will be used for model aircraft parts. There are 10 individual parts that need to be pulled to the highest quality on a single sheet. Those with the capacity and capabilities to assist are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached clamp collar is required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. Please be aware that delivery is required within three weeks of order placement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 2

    Machining-Turning, Low Volume

    The attached clamp discs are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. Please be aware that delivery is required within three weeks of order placement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 1

    Machining-Turning, High Volume

    The attached stainless steel transducer nuts will be utilised within a fastening application, on behalf of a company that spends over £250,000 a year on bespoke machining services. They seek quotes for large quantities of these components and would like to build a relationship with a supplier that can undertake repeat batches as required. A high standard of quality is essential, as well as good value. Interested vendors are asked to make contact with the buyer directly to be considered. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 4

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This company operates within the consumer products industry and outsources over £500,000 worth of fabrication work every year. They have an order to place for a new bar & bench design to be used within one of their new storage products. This project incorporates elements of fabrication and powder coating, with quotes required for 1 off and 10 off. The ideal supplier will be able to produce these parts economically and once a relationship has been established, further orders with repeatable batches could be made available, in addition to this initial requirement. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or caroline.ogden@qimtek.co.uk. Alternatively, please fax your NDA to 01256 394600. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached spigot is required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. Please be aware that delivery is required within three weeks of order placement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  10. Drawings count: 3

    Machining-Turning, Low Volume

    The attached collars are required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. Please be aware that delivery is required within three weeks of order placement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  11. Drawings count: 2

    Machining-Turning, Medium Volume

    Machining of stainless steel clamp spacers is required, by a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. The parts are to be made in accordance with the drawings provided. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, as well as a reliable delivery within 6/8 weeks, as their current production is dependent on the arrival of these parts. There will be an order to place immediately with the chosen vendor. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 2

    Machining-Milling, Medium Volume

    Machining of stainless steel manifolds is required, by a manufacturer of medical equipment that spends over £75,000 a year on outsourced manufacturing. The parts are to be made in accordance with the drawings provided. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, as well as a reliable delivery time within 6/8 weeks, as their current production is dependent on the arrival of these parts. There will be an order to place immediately with the chosen vendor. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 2

    Machining-CNC Machining, Medium Volume

    This new buyer to Qimtek specialises in the manufacture of laboratory instruments. They currently seek a new supplier for the attached aluminium parts. Ideally, the client would like to locate a supplier that can offer exemplary standards of manufacture, competitive pricing, as well as a reliable delivery time of 6/8 weeks. There will be an order to place shortly with the chosen vendor, once production requirements have reached fruition. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  14. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached clamp fitting is required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. Please be aware that delivery is required within three weeks of order placement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 1

    Machining-Turning, Medium Volume

    The attached base plate socket is required by a buyer that operates within the communications industry. The client has an annual spend on subcontract machining that exceeds £500,000 a year and so ongoing work will be made available. They would like to collaborate with a Qimtek member that can offer a short lead time, as well as a good value and high quality end product. Please be aware that delivery is required within three weeks of order placement. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 2

    Fabrication-Light Fabrication (under a tonne)

    A metal fabricator is needed, on behalf of a company that specialises in the manufacture of furniture and spends over £50,000 a year on subcontract fabrication. They currently require quotes for the attached legs and top/bottom rails, which are to be made from mild steel plate and box section. Interested suppliers are asked to quote their best price and delivery in order to be considered for this opportunity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  17. Drawings count: 2

    Machining-Turning, High Volume

    Suppliers with turning capacity are asked to make contact with this buyer - a designer and manufacturer of furniture, with a £50,000 annual spend on subcontract machining services. They have a current requirement for mild steel spacers which are sought in quantities of 500 off. These are to be turned from mild steel, ready for the client to carry out in-house anodising. Interested suppliers are asked to quote their best price and delivery in order to be considered for the opportunity. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  18. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This washroom manufacturer seeks quotes for the attached tap body in a variety of price breaks, ranging from 50 to 200 off. This design is to be made from stainless steel tube and will be required by the client on an ongoing basis moving forward. Those who would like to be considered for this opportunity are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  19. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer to Qimtek specialises in autosports components and seeks a new supplier for the attached aluminium and stainless steel parts. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  20. Drawings count: 4

    Machining-Machining, Large 1m Plus

    This supplier of bespoke lighting solutions, who outsources approximately £50,000 worth of machining each year, would like to hear from suppliers interested in manufacturing the attached large ring to be used as a light base within their current project. There is an immediate order to place for this enquiry, with quotes required as soon as possible. Although this is a one-off requirement, the chosen supplier may be asked to manufacture additional, similar components going forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

Pages