Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

491 Projects

Displaying 1 - 20 of 491

  1. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This is just one component of an extensive range of sheet metal parts the buyer requires on a regular basis. Please note the material on the drawings. A large portion of their parts are also manufactured from aluminum sheet, either plain or chequer plate, up to 4.5mm thick. Some of the parts are powder coated. It would be advantageous to have a supplier with all these capabilities, but not critical.

  2. Drawings count: 5

    Plastic & Rubber-Plastic Fabrication

    The buyer who has loaded this project on Qimtek has asked for the following: "We are responding to the Covid19 crisis for the UK. In particular, supplying face visors/shields. As I'm sure you can appreciate it is an urgent matter and would love to get a quote on the following: a small set of samples so that we can get approvals from medical provisions. That being successful, we would love to be able to get these made to scale. We are all working on this without any profit or payment and we would greatly appreciate any feasible sponsorship/discount/contribution of any other sort to help deal with this crisis! We would love to show what UK manufacturing can do as well as support your business at the same time" The buyer require quotes and lead time for the manufacture of face shields made from of PET (or equivalent) 150 to 300 microns. .005 -0.01 inches or .005" -0.01" PET (mylar/duralar) film. The buyer requires quotes on 10 units as a sample run, and then following approval, the potential quantities will be between 500-5000 per week.

  3. Drawings count: 5

    Profiling-Laser Cutting

    The buyer who has loaded this project on Qimtek has asked for the following: "We are responding to the Covid19 crisis for the UK. In particular, supplying face visors/shields. As I'm sure you can appreciate it is an urgent matter and would love to get a quote on the following: a small set of samples so that we can get approvals from medical provisions. That being successful, we would love to be able to get these made to scale. We are all working on this without any profit or payment and we would greatly appreciate any feasible sponsorship/discount/contribution of any other sort to help deal with this crisis! We would love to show what UK manufacturing can do as well as support your business at the same time." The buyer require quotes and lead time for the laser cutting of PET (or equivalent) 150 to 300 microns. .005 -0.01 inches or .005" -0.01" PET (mylar/duralar) film The buyer requires quotes on 10 units as a sample run, and then following approval, the potential quantities will be between 500-5000 per week.

  4. Drawings count: 4

    Machining-Turning, Low Volume

    This buyer, within the Oil & Gas industry, is seeking quotes and delivery for the machined components for a mandrel assembly. The buyer is ideally looking for delivery within the next 2-3 weeks. Parts are only to be manufactured- assembly will be completed in house.

  5. Drawings count: 1

    Machining-Turning, Medium Volume

    This manufacturer of hydraulic equipment, who outsources approximately £500,000 worth of machining each year, is in need of a supplier to facilitate the immediate manufacture of the attached studs. Supplied complete (including zinc plating) The yearly consumption of this part is 600 off Delivery – 10 working days or closest to it

  6. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This manufacturing consultancy company, who outsources approximately £75,000 worth of machining each year, currently seeks quotations: The buyer is looking for price and delivery of the part detailed in the drawing file. Please take note of the material specified for this part: Mallory 3950 or M&I-HE395

  7. Drawings count: 1

    Machining-Machining, Plastics

    The attached lamp socket is made up of 3 parts; one copper off the shelf component, which is not required and two plastic components, which are. Whilst delivery and quality are at the forefront of this enquiry, price will also be a deciding factor.

  8. Drawings count: 2

    Machining-Machining, Plastics

    With the current drive to develop ventilators and other life-saving equipment, this medical research company is in need of suppliers immediately to turn the attached plastic parts. These items will be used within a CPAP machine and responses are therefore required extremely urgently. With an immediate order to place, this will be an ongoing weekly requirement for the short-term, but foreseeable, future.

  9. Drawings count: 2

    Profiling-Laser Cutting

    With the current drive to develop ventilators and other life-saving equipment, this medical research company is in need of suppliers immediately for the profiling of the attached sheet. This item will be used within such equipment and responses are therefore required extremely urgently. With an immediate order to place, this will be an ongoing weekly requirement for the short-term, but foreseeable, future.

  10. Drawings count: 2

    Machining-CNC Machining, High Volume

    With the current drive to develop ventilators and other life-saving equipment, this medical research company is in need of suppliers immediately for the manufacture of the attached blocks which are to be machined from solid. These items will be used within such equipment and responses are therefore required extremely urgently. With an immediate order to place, this will be an ongoing weekly requirement for the short-term, but foreseeable, future.

  11. Drawings count: 3

    Machining-CNC Machining, Low Volume

    This manufacturer of gas analysis equipment, who outsources approximately £150,000 worth of machining work each year, is looking to increase their supplier base with additional and alternative UK-based machinists, and would like to hear from interested parties with quotations for the attached sample components. There is an immediate order to place for these parts, with delivery required by April 21st. This will be a one-off requirement, although the chosen supplier will be asked to manufacture additional, similar components going forward, once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  12. Drawings count: 4

    Plastic & Rubber-Plastic Fabrication

    This natural sciences research and development centre is in need of a new range of enclosures required for greenhouse gas research. Therefore, they require the assistance of a plastic supplier who can manufacture the attached design. Although there is no immediate order to place, once the plot size - and therefore, the quantity required - has been confirmed, the order will follow shortly after with delivery to be finalised at this point as well. This is currently a one-off requirement with delivery to be staggered on a call-off basis. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  13. Drawings count: 2

    Tool Making-Mould Tools

    This university of engineering and medicine is currently developing sensors for medical use and requires the assistance of a supplier for the attached aluminium mould tool. With an immediate order to place for this enquiry, the buyer has indicated that this is expected to be repeated but very infrequently, so please quote this as a one-off requirement.

  14. Drawings count: 3

    Machining-Milling, Low Volume

    With an outsource spend of over £50,000 each year on various aspects of machining work, this company has an immediate order to place for the attached design of sensor bracket and track back plate, which will both be used within industrial machinery. Quotes are sought for 1 off of each, with scope for additional work once a relationship has been established. Delivery, a good quality end product and pricing are all important elements of this enquiry. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  15. Drawings count: 2

    Machining-Milling, Medium Volume

    Destined for use within autosport vehicles, these carbon fibre parts are sought by a manufacturer who currently spends approximately £85,000 each year on outsourced machining. There is an immediate order to place for this enquiry which is a one-off requirement at this stage, although the chosen supplier may be asked to quote for additional, similar components once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  16. Drawings count: 3

    Tool Making-Mould Tools

    This designer and manufacturer of composite products has a new design of mould tool that will be used to replace existing tools within a client's machinery. They would like to hear from suppliers who are interested in the manufacture of these mating components. Although there is no immediate order to place for this enquiry, as soon as the design is approved, the order will follow. This is likely to be repeated for another of their machines going forward. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  17. Drawings count: 4

    Machining-Milling, Low Volume

    This Qimtek member, a machining supplier themselves, is currently at capacity and requires the assistance of an external supplier who can assist with an urgent order for a range of components. This is a one-off requirement, although the chosen supplier may be asked to assist again in the future when required.

  18. Drawings count: 3

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This luxury furniture manufacturer is currently quoting for a project and requires the assistance of a sheet metal supplier to manufacture the attached components from stainless steel. These will be used within a rail application. Although there is no immediate order to place, should the buyer be successful in their tender, the order will follow shortly after. Initially, the client requires prototypes of these parts, which could lead to much larger orders once approved.

  19. Drawings count: 3

    Machining-Milling, Low Volume

    This luxury furniture manufacturer is currently quoting for a project and requires the assistance of a machinist who can produce the attached components from copper and aluminium alloy. These parts will be used within a rail application. Although there is no immediate order to place, should the buyer be successful in their tender, the order will follow shortly after. Initially, the client will require prototypes of these parts, which could lead to larger orders once approved.

  20. Drawings count: 2

    Profiling-Water Cutting

    Destined for use within autosport vehicles, these carbon fibre parts are sought by a manufacturer who currently spends approximately £85,000 each year on outsourced fabrication. There is an immediate order to place for this enquiry which is a one-off requirement at this stage, although the chosen supplier may be asked to quote for additional, similar components once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

Pages