Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

611 Projects

Displaying 1 - 20 of 611

  1. Drawings count: 2

    Fabrication-General Sheet Metal Under 6mm

    This company, who spends £100,000 a year on subcontract fabrication, seeks a supplier to manufacture a new design of aluminium shovel. The prototype manufacture will entail aspects of cutting, folding, and welding, but at the production phase of the project, the shovels are required to be pressed. This is a new design and as such, supplier input is greatly appreciated. There is an immediate order to place for the prototypes, which will become an ongoing requirement moving forward.

  2. Drawings count: 1

    Machining-Turning, Low Volume

    This manufacturer of gas burners requires a supplier for the machining of the attached air intake. It is to be made from mild steel and will incorporate aspects of turning, chamfering and drilling. There is an immediate order to be placed; the successful supplier will also be privy to alternative opportunities with this client moving forward.

  3. Drawings count: 3

    Fabrication-General Sheet Metal Under 6mm

    This company, a manufacturer of reaching aids who spends £100,000 a year on subcontract fabrication, seeks a new supplier to manufacture a large range of mild steel and aluminium components. This work will entail aspects of cutting and folding, as well as a selection of finishes including powder coating. This is part of a supplier review and therefore, the successful supplier will secure not only this project, but also an ongoing partnership moving forward.

  4. Drawings count: 2

    Machining-Machining, Large 1m Plus

    This client - a company that spends in excess of £4.5million a year on subcontract machining services - is looking to partner with a Qimtek member that can assist with the complete manufacture of the attached mandrel assemblies. This project incorporates aspects of milling, drilling and turning - please note that a small amount of fabrication may also be required. Due to the large size of some of the associated components, this project is best-suited to suppliers with overhead lifting equipment. Owing to the client's large spend, the successful supplier will secure not only the work in question, but also a long-term customer with an abundance of machining requirements.

  5. Drawings count: 1

    Machining-Machining, Plastics

    This manufacturer of prop shafts seeks a supplier for the machining of the attached plastic transportation blocks - these are new designs and encompass aspects of milling, drilling and embossing. Those with the in-house facilities to complete this work, whilst also offering good value, are asked to make contact with the buyer at their earliest opportunity - in turn, they will also be asked to quote on additional size variants of these parts.

  6. Drawings count: 2

    Machining-CNC Machining, Low Volume

    Destined for end use within the electronics industry, these rear pivot cylinders and cam levers are to be made from mild steel, on behalf of a company that spends over £100k per year on bespoke machined designs. Quotes are required for 20 off and 40 off and the client has also advised that this will be an ongoing requirement, making it an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  7. Drawings count: 2

    Fabrication-General Heavy Fabrication 15mm Plus

    This manufacturer of automated robotics systems requires a supplier to manufacture the attached rotating table and plate base. Suppliers able to offer both competitive pricing and high quality are best suited to this enquiry, any interested parties should make contact with the buyer directly in order to be considered.

  8. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This buyer, who works within the robotics industry and spends excess of £100,000 a year on machining, seeks suppliers to quote on the attached bearing mount block. Suppliers able to offer both competitive pricing and high quality are best suited to this enquiry, any interested parties should make contact with the buyer directly in order to be considered.

  9. Drawings count: 3

    Fabrication-General Fabrication 6-15mm

    This buyer is looking for a supplier with capacity to fabricate the attached emulsions filter assembly, which is to be used in the manufacture of gas burners. There is an order to place for this project with ongoing work made available to the successful supplier in future. This project incorporates aspects of cutting, drilling, folding and assembly and is to be manufactured from a mixture of mild steel and stainless steel.

  10. Drawings count: 1

    Fabrication-General Fabrication 6-15mm

    A supplier is required for the production of a steel workbench, on behalf of a fellow Qimtek member.These are to be manufactured from 90x90 box section and must also include a separate steel top. These are for in-house use, and could lead to additional batches in varying sizes. Quality is of the upmost importance, the tables must be the exact same size as they must be flush when sat side-by-side . Those that are interested in being considered for this opportunity are asked to contact the buyer directly to discuss.

  11. Drawings count: 1

    Fabrication-Presswork

    This manufacturer of gas burners, who outsources a massive £55,000 a year on fabrication, requires an ongoing supplier for the attached burner flange, making this an ideal enquiry for a company looking to fill long-term capacity. Due to an increase in quantity the buyer urgently seeks an alternative supplier for this part. There is an initial order ready for 200 off with ongoing yearly batches of 400/600 expected.

  12. Drawings count: 1

    Fabrication-Laser Cutting

    This manufacturer of gas burners seeks a supplier to cut and etch the attached stainless steel plate and tubing. There is an order to place for 400 off of each, with ongoing batches of 500/1000 off to follow for the successful supplier. The client outsources over £55,000 worth of fabrication work every year, meaning that there is an abundance of additional opportunities available for the supplier that they select.

  13. Drawings count: 2

    Fabrication-Laser Cutting

    This buyer is looking for laser cut plates for a prototype project, to be made from stainless steel 304. There is an order to place with ongoing work if the testing is successful. The client outsources over £55,000 worth of fabrication work every year, meaning that there is an abundance of additional opportunities available for the supplier that they select.

  14. Drawings count: 2

    Machining-Machining, Large 1m Plus

    Suppliers with the capabilities to machine a set of press strips that exceed 1.2 metres in length are sought. The client - an electrical equipment OEM - seeks price and lead time indications as part of a larger job for which they are currently tendering. 2 off of each part listed will be required initially, with further orders also available for the vendor that the client selects.

  15. Drawings count: 3

    Machining-Turning, Medium Volume

    This Qimtek member is looking for a machinist to manufacture the attached header tank water connection & water hose. Both of these designs are to be made from aluminium, with quotes required for quantities ranging from 200 to 500 off per component. Due to recent price increases, the client seeks a new supplier to undertake this work on an ongoing basis, as well as fulfilling an immediate order.

  16. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This buyer is looking for a machinist that can manufacture wooden parts. They have an urgent order to place for the attached wood rest, to be used within the manufacture of a wine rack. The client is open to supplier input regarding the best wood to be used. The first order is for 10 sets of 50 off (500 pieces total), making it a sizeable project with ongoing work available moving forward. Interested suppliers are asked to make contact with the buyer at their earliest convenience to discuss.

  17. Drawings count: 11

    Machining-Turning, Medium Volume

    This buyer, who outsources £200,000 of machining work per year, requires a machining supplier with immediate capacity as they have an urgent order to place for the attached cap screws. The material will be free-issued to the successful supplier ready for machining. The required quantities range from 24 off to 250 off - please see attached document for complete details. Due to the urgent nature of the enquiry, interested parties are asked to make contact as soon as possible; in addition, similar work could also be available moving forward.

  18. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer, who outsources £500,000 of machining work per annum, requires the attached contact tip support tube to be manufactured from Tellurium copper. This part will be used within the thermal spray sector, with quotes for 10 off required at this time. There is an immediate order to place, with similar work to be made available to the successful supplier moving forward. Therefore, this is an opportunity to win a new long-term customer, as well as the work in question.

  19. Drawings count: 1

    Fabrication-Architectural Steelwork

    This buyer, with an annual spend of £250,000 on outsourced fabrication, requires a supplier for the attached gantry & staircase. There is an urgent order to place with similar work available for the successful supplier. Therefore, interested parties are asked to make contact with the buyer as soon as possible in order to be considered. Responses from companies that can offer a short lead time will be viewed favourably, with delivery required within three weeks of order placement.

  20. Drawings count: 3

    Fabrication-Fabrication with Machining

    Suppliers that have the capabilities required to produce the attached auger are sought, on behalf of a company that spends over £90,000 a year on bespoke fabrication services. They are looking for a vendor that can assist not only with this initial requirement, but also with the production of various sizes moving forward. This may make it especially well-suited to those who are looking to increase their long-term customer base moving into the new year.

Pages