Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

555 Projects

Displaying 1 - 20 of 555

  1. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    A new project from this client requires a component to be injection moulded using Polypropylene, forming part of chopping board kitchen equipment for wheelchair users. Quotes are required for 500 off and the client has also advised that this could lead to future work, depending on the outcome of product sales when launched. Tooling is also required for this request. The client is keen to place an order quickly with good lead times, so if a suitable quote is received early, the work could be awarded before the quote date is reached.

  2. Drawings count: 3

    Machining-Milling, High Volume

    These milled wooden components are to be made from maple and form part of chopping board kitchen equipment for wheelchair users. Quotes are required for 500 off and 1000 off and the client has also advised that this could lead to future work depending on the outcome of product sales. The client is keen to place an order quickly with good lead times, so if a suitable quote is received early, the work could be awarded before the quote date is reached.

  3. Drawings count: 1

    Machining-Gear Cutting

    Outsourcing machining work to the tune of over £70,000 every year, this company is currently seeking a supplier who can manufacture the attached switch shaft to a high standard, using machining and gear cutting processes. The buyer has an order ready to place for its production with delivery needed in January, which will also lead to ongoing work following the initial order of 6 off. Those that are interested in being considered for this project are asked to make contact with the buyer directly to discuss.

  4. Drawings count: 2

    Plastic & Rubber-Plastic Fabrication

    This company is currently seeking a UK supplier to laser cut polar white perspex, which is part of a photo negative digitiser being brought to market as the result of a new, highly successful Kickstarter project. Quotes are sought for 1000 off and 5000 off - this will hopefully lead to ongoing work in addition to these initial quantities.

  5. Drawings count: 5

    Fabrication-Laser cutting, tube

    These aluminium tubes are to be laser or water jet cut, as part of a new project destined for the food and beverage industry. Quotes are required for 10 off initial prototypes and the client has also advised that this could lead to an ongoing requirement with larger quantities if the testing is successful, making it an ideal opportunity to fill long-term capacity. The diagonal cut needs to twist during cutting if possible, so there are no sharp edges on the top and bottom of the piece. The attached pictures of the side view show this in more detail. Bead blasting, anodising and laser engraving is also required after the tube cutting process, so if you are able to complete these processes alongside the profiling, please do include these within your quote. The buyer is happy to accept quotes for tube cutting only if the extra processes are not available.

  6. Drawings count: 5

    Plastic & Rubber-Injection Moulding

    This company is currently seeking a UK supplier who can injection mould the attached parts, in order to make a photo negative digitiser as part of a new highly successful Kickstarter project. Tooling is also required. Those that are interested in being considered for this job are asked to sign the attached non-disclosure agreement to download initial details. In addition, the buyer can supply full CAD drawings upon request if required, once the NDA has been signed and returned. Quotes are sought for 1000 off and 5000 off, this will hopefully lead to ongoing work in addition to these quantities. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account.

  7. Drawings count: 4

    Finishing-Anodising

    A new supplier is sought to hard anodise free-issue high-strength aluminium castings. This project will start with 1 off aluminium cast outer member, but will lead to ongoing work thereafter. Quality and delivery lead times are the most important requirements to the buyer. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  8. Drawings count: 6

    Plastic & Rubber-Vacuum Forming

    This company has an immediate order to place for vacuum formed components to make small craft used in the marine industry, which will be used to house a PCB. Quotes are required for 3 off of each component initially, followed by future orders of larger quantities. The ideal supplier will be able to offer reliable delivery and once a relationship has been established, further projects could be made available in addition to this initial requirement.

  9. Drawings count: 1

    Fabrication-General Sheet Metal Under 6mm

    Outsourcing fabrication work to the tune of over £30,000 every year, this company is currently seeking a supplier who can manufacture the attached components, which will form part of a modular hose reel assembly. This design will be used as part of a project for the industrial machinery sector and the buyer has an order ready to place for its pre-production. The ideal supplier will be able to produce these parts economically and offer reliable delivery; once a relationship has been established, further projects could be made available in addition to this initial requirement.

  10. Drawings count: 2

    Fabrication-Tube Bending & Manipulation

    The attached gas ring and gas feed pipe will be used within a gas delivery system for nitrogen and argon gases and are to be made from stainless steel tube. This project is on behalf of a company that spends over £150,000 per year on bespoke fabrication work. Quotes are required for 1 off of each design and the client has also advised that this will be an ongoing requirement with additional, similar work available going forward, making it an ideal opportunity to fill both short-term and long-term capacity.

  11. Drawings count: 4

    Machining-Milling, Low Volume

    Outsourcing machining work to the tune of over £200,000 every year, this company is currently seeking a supplier who can machine the attached pair of finger joints using free-issue duplex material. This design will be used as part of a new and major footbridge project in Cornwall and the buyer has an immediate order ready to place for its production. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities of similar work once quality and reliability have been proven.

  12. Drawings count: 1

    Machining-Milling, Low Volume

    Destined for end use within the agriculture industry, these swivel blocks are to be made from mild steel, on behalf of a company that spends over £50,000 per year on bespoke machined designs. Ideally, the client requires quotes for 5 off to be submitted this week and has also advised that this will be an ongoing requirement, making it an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the buyer moving forward.

  13. Drawings count: 5

    Electronic / Electrical-PCB Assembly, Surface Mount

    This company outsources over £1.5million worth of electronics work every year. They have an order to place for manufacture and assembly of double-sided surface mount PCB boards, as well as programming at a later date. These boards will be used within an environmental capacity. Quotes are required for batches of 50 off, 100 off and 250 off of each board. The ideal supplier will be able to offer reliable delivery, with an economical price and provide a high-quality end product. Once a relationship has been established, further projects could be made available in addition to this initial requirement.

  14. Drawings count: 4

    Woodworking-Wood Fabrication

    These kitchenware handles are to be made from wood - the suggested wood material to be used is lime, oak or beech; however, the client is open to suggestions should a better alternative be put forward. Quotes are required for 500 off of each half and the client has also advised that this may lead to an ongoing requirement depending on initial sales of this first batch. Therefore, it may be an ideal opportunity to fill long-term capacity. In addition, there may be scope for the chosen supplier to expand upon their involvement with the client moving forward.

  15. Drawings count: 3

    Machining-Turning, Low Volume

    Outsourcing machining work to the tune of £20,000 every year, this company is currently seeking a supplier who can manufacture the attached spigots for the automotive industry. The buyer has an order ready to place for their production. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  16. Drawings count: 1

    Machining-CNC Machining, Low Volume

    Outsourcing machining work to the tune of £50,000 every year, this company is currently seeking a supplier who can manufacture the attached bearing casing. This design will be used as part of a project for the autosports sector and the buyer is looking for the most economical method of manufacture, leading to the production of many other components of a similar nature. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss; in addition, this could result in further opportunities once quality and reliability have been proven.

  17. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This company operates across many industries and outsources over £40,000 worth of machining work every year. They have an immediate order to place for stainless steel adaptors, which will be used within fuel tanks in tug boats. This project incorporates elements of turning, threading, boring and milling, with quotes required for 50 off. The ideal supplier will be able to produce these parts economically and provide a highly accurate, quality end product. Once a relationship has been established, further projects could be made available in addition to this initial requirement.

  18. Drawings count: 3

    Fabrication-Fabrication with Machining

    This company outsources over £11.5 million worth of machining, fabrication and electronics work every year. They are looking for quotes for large annual volumes of cable detector systems which are used by spiking the ground. This project incorporates elements of tube fabrication, machining and assembly with quotes required for 1000 off per year. There is also an electronics element to this project which has been sent to our electronics members, collaboration with the chosen electronics supplier is also required. The ideal supplier will be able to produce these parts economically, offer reliable delivery and also provide a high-quality end product and once a relationship has been established, further projects could be made available in addition to this ongoing requirement. Prior to work commencing, a supplier visit and QA audit will be carried out along with a third party review if applicable. PPAP / ISIR is also required for the first batch. Please note that due to the confidentiality surrounding these parts, signed NDAs will be forwarded onto the buyer for approval before drawings can be released. Therefore, there may be a short time delay before drawings are released for this reason.

  19. Drawings count: 2

    Fabrication-Water Cutting

    This company operates within the electronics industry and outsources over £150k worth of fabrication work every year. They have an immediate order to place for 5 axis water cutting of a wafer carousel. This project will require 5 axis water cutting equipment of free issue stainless steel which has been pre-fabricated to shape using the spinning process. Quotes are required for 1 off at this time which will in-turn lead to further orders in future in low quantities moving forward . The ideal supplier will be able to provide a high-quality end product and, once a relationship has been established, further projects could be made available in addition to this initial requirement.

  20. Drawings count: 4

    Electronic / Electrical-Electromechanical Assembly

    This company outsources over £8 million worth of electronics work every year. They are looking for quotes for large annual volumes of cable detector systems which are used by spiking the ground. This project incorporates elements of cable looms and assembly with quotes required for 1000 off units per year. There is also a fabrication element to this project which has been sent to our fabrication members. The ideal supplier will be able to produce these parts economically, offer reliable delivery and also provide a high-quality end product and once a relationship has been established, further projects could be made available in addition to this ongoing requirement. Prior to work commencing, a supplier visit and QA audit will be carried out along with a third party review if applicable. Please note that due to the confidentiality surrounding these parts, signed NDAs will be forwarded onto the buyer for approval before drawings can be released. Therefore, there may be a short time delay before drawings are released for this reason.

Pages