Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

118 Projects

Displaying 1 - 20 of 118

  1. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    Urgent quotes are requested by this buyer for the material supply and fabrication of the attached copper nozzle. Delivery is required by 20th April, making this project a great fit with suppliers who have immediate capacity to fill. Interested suppliers are asked to submit their quotation as soon as possible to be considered - owing to the client's £100,000 annual spend on subcontract machining processes, there may be further opportunities available once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    This buyer is seeking quotes and best lead times for the attached frames and associated parts. The required material is mild steel, with the parts to be supplied machined and fully welded, but not powder coated. This is due to the fact that the client wishes to see if there are any design alterations that may be required. There is an immediate order to place for the work in question and as the buyer requires these parts fairly urgently, suppliers who can offer a fast turnaround may be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 1

    Full turnkey-Fabrication with Machining

    This buyer is seeking quotes and best lead times for the attached frames and associated parts. The materials involved are mild steel and stainless steel, with the parts to be supplied machined and fully welded, but not powder coated. This is due to the fact that the client wishes to see if there are any design alterations that may be required. There is an immediate order to place for the work in question and as the buyer requires these parts fairly urgently, suppliers who can offer a fast turnaround may be seen favourably. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 1

    Machining-CNC Machining, Low Volume

    The assistance of a new supplier is required by this company, who spend over £100,000 a year on subcontract machining. They require quotes for both the machining and hardening of the attached component, for which there is an immediate order to place. In addition, this will be an ongoing requirement for the successful supplier, meaning that this is an opportunity to win a new long-term customer as well as the work in question. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 1

    Welding-Mig

    This new buyer to Qimtek specialises in manufacturing access equipment and seeks a new supplier for the attached guardrail foot. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 1

    Fabrication-Tube Bending & Manipulation

    This new buyer to Qimtek specialises in manufacturing access equipment and seeks a new supplier for the attached mild steel tube ends. The ideal supplier will be able to produce these parts economically, with an emphasis on reliability and high quality. There is an order to place immediately with a supplier who can offer all of the above. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 1

    Machining-CNC Machining, Low Volume

    Reverse engineering of a cam is required by a company that operates within the industrial machinery sector. The client seeks a supplier to complete the drawing from a free-issued cam, as well as manufacturing 1 off in this instance. Interested suppliers are asked to make contact at their earliest convenience to discuss; in addition, this could result in further opportunities owing to the client's £100,000 annual spend on subcontract machining services. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  8. Drawings count: 2

    Machining-Milling, Low Volume

    The assistance of a new supplier is required by this company, who spends over £100,000 a year on subcontract machining. They are looking for quotes on the two attached drawings, for which there is an order ready to place. In addition, the buyer has advised that this will be ongoing work for the chosen supplier, making this an opportunity to win a new long-term customer as well as the work in question. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  9. Drawings count: 3

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    Spending over £2million per year on subcontract fabrication work, this company specialises in the manufacture of office furniture. They are looking for a supplier who can assist with the production of mass cable riser parts, which is to be made from bright mild steel. Quotes are sought in a variety of price breaks, although the client has advised that they have an immediate order to place for 10/25/100 off of this design. In addition, this could become an ongoing requirement for the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  10. Drawings count: 1

    Fabrication-Light Fabrication (under a tonne)

    The attached cart fabrication will be used to support heavy sheets of material weighing up to 400kg. This is to be made from aluminium in accordance with the drawing attached. The buyer behind this enquiry has an immediate order to place for 1 off of this design, with scope for further units to be ordered at a later date. Delivery of the initial order is required by 28th May; suppliers with the capacity to assist are asked to make contact with the buyer directly to discuss.

  11. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This buyer is urgently seeking a supplier who can assist in the manufacture of the attached hydraulic fitting. This is to be made from mild steel in accordance with the drawings provided. The client is looking to order 14 off as soon as possible, with a further 20 off required thereafter. Interested suppliers are asked to make contact with the buyer at their earliest opportunity to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  12. Drawings count: 1

    Machining-Turning, Low Volume

    This buyer requires quotes for a turned component, which will be used within an autosports application. They would like to receive quotes for this part to be made from stainless steel in batches of 2 off . The buyer is especially keen to speak to suppliers who can offer a fast turnaround on the production of this design, which will be ordered on a repeat basis throughout the year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  13. Drawings count: 1

    Tool Making-Mould Tools

    Quotes are currently sought for the production of a rubber mould tool, which is to be made from mild steel. The client - a company that spends over £20,000 a year on subcontract machining processes - is seeking quotes for 1 off at this time. Although there is no immediate order to place, the buyer is confident that they will be able to move forward with this enquiry in the near future. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  14. Drawings count: 2

    Machining-CNC Machining, Low Volume

    This buyer requires quotes for a turned component, which will be used within an autosports application. They would like to receive quotes for this part to be made from stainless steel in batches of 30 and 60 off. The buyer is especially keen to speak to suppliers who can offer a fast turnaround on the production of this design, which will be ordered on a repeat basis throughout the year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  15. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    Suppliers that are able to laser cut, bend and fold steel rungs are sought. The client is looking for 1300 off of this design for end use within a project for the medical industry and will look to place an order when all details have been finalised with colleagues. Delivery is required by mid-July. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  16. Drawings count: 3

    Profiling-Laser Cutting

    This buyer requires quotes for laser parts, which will be used within an autosports application. They would like to receive quotes for these parts to be made from both 8mm thick Aluminium and 10mm thick Aluminium. The buyer is especially keen to speak to suppliers who can offer a fast turnaround on these components, which will be ordered on a repeat basis throughout the year. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  17. Drawings count: 3

    Profiling-Laser cutting, tube

    This buyer requires quotes for a laser cut tube, which will be used within an autosports application. Having previously had these parts made overseas, the client now wishes to return production to the UK. The buyer is especially keen to speak to suppliers who can offer a fast turnaround on these components, which will be ordered on a repeat basis throughout the year. Please note that this project was previously published through Qimtek in November 2020; however, the client now seeks additional quotes. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  18. Drawings count: 1

    Machining-CNC Machining, Low Volume

    Suppliers are asked to quote their best price and fastest lead time for the production of item 5 and 7 only on the attached drawing . These are to be made from stainless steel, with quotes requested for 1 & 2 off at this time. The client outsources over £200,000 worth of subcontract fabrication work annually, meaning that there may be additional opportunities available to the successful supplier once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  19. Drawings count: 1

    Machining-CNC Machining, High Volume

    Suppliers are currently sought to machine two different designs of mild steel tube ends, on behalf of a buyer who operates within the furniture industry and outsources over £200,000 worth of engineering work per year. The tubes will be free-issued to the successful supplier, ready for the required machining work to be carried out. The buyer has an immediate order to place for the work in question and has also advised that this will become an ongoing requirement moving forward. Suppliers who are interested in being considered for this enquiry are asked to make contact with the buyer directly to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  20. Drawings count: 4

    Machining-Milling, Low Volume

    This buyer currently seeks suppliers with milling capacity to produce the attached component from carbon steel. They have an immediate order to place for this enquiry, with delivery required by 14th March; therefore, this enquiry may be of particular interest to those with immediate capacity to fill. Suppliers who are interested in being considered for this enquiry are asked to make contact with the buyer at their earliest convenience to discuss. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

Pages