Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

189 Projects

Displaying 1 - 20 of 189

  1. Drawings count: 3

    Machining-Milling, Low Volume

    Quotations for the manufacture of the attached differential plates are currently required from interested machining suppliers. Destined for use within the construction industry, these parts are to be used within a bespoke build, meaning this is currently a one-off requirement, although the chosen supplier may be asked to manufacture additional, similar components going forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  2. Drawings count: 1

    Machining-CNC Machining, Low Volume

    Countersinking and chamfering of free-issue plates is needed, on behalf of a company that spends over £85,000 a year on subcontract machining services. The parts in question are destined for end use within a truck & transportation application, with quotes required for 36 off at this time. Delivery is required by mid-November, making this a good fit with suppliers who have immediate capacity to fill. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  3. Drawings count: 1

    Machining-Turning, Low Volume

    Quotations for the manufacture of the attached flanges are currently required from interested machining suppliers. Destined for use within the automotive industry, these parts are to be used within a bespoke build, meaning this is currently a one-off requirement, although the chosen supplier may be asked to manufacture additional, similar components going forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  4. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This metal spinning manufacturer seeks the assistance of a supplier who can produce the listed parts required for the full assembly of their cranked fork. Full assembly is not required; only manufacture of the piece parts for later assembly in-house. The client has an immediate order to place for the work in question, and this is likely to be repeated going forward, spelling ongoing work for the chosen supplier. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  5. Drawings count: 2

    Woodworking-Wood Fabrication

    This company has an immediate order to place for 1 off and 500 off laptop stands, which are to be made from plywood in accordance with the drawings attached. The client ideally requires delivery of the initial sample by 5th November, making this a great opportunity to supplement short-term workload. In addition, there is potential for this to become an ongoing requirement once the project reaches full production, with much larger batches to ordered at this stage. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  6. Drawings count: 1

    Machining-Turning, High Volume

    Specialising in machining themselves, this buyer is currently at capacity in-house and requires the assistance of an external turning supplier to assist with the attached collar This is to be used as a stock item. This is currently a one-off requirement, although the chosen supplier may be asked to manufacture similar parts going forward, once a relationship has been established. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement. Please also be mindful that there may be a delay in buyer response due to widespread remote working.**

  7. Drawings count: 1

    Machining-CNC Machining, Medium Volume

    This enquiry forms part of a larger project that the buyer is currently tendering for. Quotes are currently sought for the attached airbrush holder, which will be used within a spray booth. Interested suppliers are asked to quote for this design to be manufactured in aluminium and/or acetal. Once the buyer has won the work, this will become an ongoing requirement and therefore, it may be of particular interest to those who are looking to supplement their long-term customer portfolio.

  8. Drawings count: 10

    Sheet Metal Forming-Press brake work

    Outsourcing £250,000 worth of fabrication work every year, this company specialises in aluminium glazing solutions. They have an immediate requirement for the attached set of parts, which are to be made from aluminium in quantities ranging from 1 to 80 off. Delivery is required by the October 14th and therefore, quotes are required as soon as possible. This is currently a one-off requirement, although the chosen supplier may be asked to manufacture additional, similar components going forward, once a relationship has been established.

  9. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    Outsourcing £250,000 worth of fabrication work every year, this company specialises in aluminium glazing solutions. They have an immediate requirement for the attached set of flashings, which are to be made from aluminium in quantities ranging from 1 - 3 off. Delivery is required by the October 11th and therefore quotes are required immediately. This is currently a one off requirement although the chosen supplier may be asked to manufacture additional, similar requirements going forward, once a relationship has been established.

  10. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    Outsourcing £250,000 worth of fabrication work every year, this company specialises in aluminium glazing solutions. They have an immediate requirement for the attached set of flashings, which are to be made from aluminium in quantities ranging from 1 - 3 off. Delivery is required by the October 11th and therefore quotes are required immediately. This is currently a one off requirement although the chosen supplier may be asked to manufacture additional, similar requirements going forward, once a relationship has been established.

  11. Drawings count: 3

    Full turnkey-Machining with Fabrication

    This Manufacture & Design consultant is in need of of suppliers interested in manufacturing the attached drawbar assembly , on behalf of their end-client. With an immediate order to place for this enquiry, delivery is required in February 2021, ready for the client to assemble the complete build. Although this particular assembly is a one-off requirement, the buyer does have a wide range of additional components of a similar nature that will be required from the chosen supplier once a relationship has been established.

  12. Drawings count: 3

    Full turnkey-Fabrication with Machining

    This client, a Manufacture & Design consultant is in need of of suppliers interested in manufacturing the attached cutter deck Assembly on behalf of their end-client. There is an immediate order to place for this enquiry with delivery required in February 2021. This must be supplied on time and ready for the client to assemble the complete build. Although this particular assembly is a one-off requirement, the buyer does have a wide range of additional components of a similar nature that will be required from the chosen supplier once a relationship has been established.

  13. Drawings count: 3

    Full turnkey-Fabrication with Machining

    This client, a Manufacture & Design consultant, is in need of suppliers interested in manufacturing the attached mezzanine chassis assembly on behalf of their end-client. There is an immediate order to place for this enquiry with delivery required in February 2021, ready for the client to assemble the complete build. Although this particular assembly is a one-off requirement, the buyer does have a wide range of additional components of a similar nature that will be required from the chosen supplier once a relationship has been established.

  14. Drawings count: 1

    Machining-Turning, Low Volume

    Outsourcing approximately £1000,000 worth of machining requirements each year, this manufacturer of foundry products is in need of a supplier for the attached range of incoloy components. There is an immediate order to place for this enquiry, with delivery required as soon as possible. Although this is currently a one-off requirement, these are to be repeated in line with future assemblies . The chosen supplier may also be asked to manufacture additional, similar designs moving forward.

  15. Drawings count: 6

    Machining-Turning, Low Volume

    This subsea telecommunications manufacturer is in urgent need of the attached range of turned and tapped components to be made from stainless steel. There is an immediate order to place for this enquiry with delivery required on/by the end of the week - Friday 18th September. This is a one-off requirement, although these parts are very likely to be repeated within future projects.

  16. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This marine manufacturer is in need of a quick turnaround on the attached cut and folded range of components, to be made from stainless steel. There is an immediate order to place for this enquiry and although it is currently a one-off requirement, these parts are required with each project and therefore, the order will be repeated on an ad-hoc basis going forward.

  17. Drawings count: 2

    Machining-Turning, Low Volume

    The attached blade coupler and seal housing are required for end use within a prototype machine. The client seeks quotes for 1 off and 10 off of each part and has an immediate order to place for the work in question. This is expected to be repeated going forward, although the order frequency is not yet known. Delivery is required by 21st September, making this a great opportunity to fill immediate capacity.

  18. Drawings count: 1

    Machining-Grinding

    Spending £250,000 a year on subcontract machining services, this company is currently seeking a supplier to grind a free-issue spun form component on their behalf. Ideally, they require the chosen supplier to grind the surface of the part until defects are no longer visible, before measuring the remaining thickness of the material; however, they have advised that the measuring can be carried out by a third party if necessary. As well as having an immediate order to place for 1 off, the client has advised that there is scope for a further 8 off to follow if the project is successful.

  19. Drawings count: 2

    Machining-Turning, Low Volume

    The attached filter disc housing is required urgently by a manufacturer of water treatment systems. They are looking to partner with a company who can offer a fast turnaround for 30 off of this part, which will become an ongoing requirement once the initial order is completed. A high standard of quality and prompt delivery are of the utmost importance for this project. The work will be awarded as soon as the right supplier is found and therefore, interested parties are asked to submit their quotation as soon as possible.

  20. Drawings count: 1

    Machining-Turning, Low Volume

    This steel fabrication supplier, who themselves outsource approximately £85,000 worth of machining each year, is in need of quotations from prospective suppliers for the attached end caps to go into an architectural canopy. Although there is no immediate order to place, if the buyer is successful in their tender, the order will follow shortly after. This will be a one-off requirement although the chosen supplier may be asked to manufacture additional, similar components going forward.

Pages