Qimtek

Displaying 1 - 20 of 4316

  1. Drawings count: 3

    Woodworking-Wood Fabrication

    The attached candy cart is to be fabricated in accordance with the drawings provided, on behalf of a Qimtek member that does not work with wood. They are looking for 1 off of this cart, with the possibility of similar units being required in the near future. This is a new design, for which a supplier has not yet been allocated and interested parties are asked to quote their best price and delivery in order to be considered for the opportunity.

  2. Drawings count: 1

    Plastic & Rubber-Dip Moulding

    The attached waterproofing boot is to be dip moulded, ready for use within the electronics industry. The client is looking for 300 off of this item and welcomes supplier input regarding the design. Those with the applicable capabilities are asked to make contact with the buyer directly to discuss.

  3. Drawings count: 4

    Machining-Machining, Multi-Axis

    A carbon fibre manufacture whose annual outsourced machining spend totals in excess of £50,000 per annum, seeks the assistance of a machinist with multi-axis capabilities, as well as the immediate capacity available to accommodate their current requirement. There are four different sizes of insert, which are all to be machined from aluminium. The client would ideally like to partner with a supplier who can adhere to the requested schedule, with split delivery over December and January. The work will be repeated again in future, providing an opportunity to gain a new long-term customer.

  4. Drawings count: 7

    Fabrication-General Sheet Metal Under 6mm

    With an annual spend of £200,000 on bespoke fabricated parts, this company specialises in the manufacture of conveyor systems. They require the assistance of a third party, who is able to produce the attached set of parts from a combination of mild steel and stainless steel. They have an immediate order to place for this work and as a result, interested suppliers are asked to make contact at their earliest convenience if they can assist. Similar work will be made available moving forward, meaning that there is plenty of scope to develop the relationship with the client and diversify into additional projects.

  5. Drawings count: 9

    Machining-Machining, Large 1m Plus

    Finish machining is needed on the attached set of free-issue castings. The company behind this enquiry seeks the parts in question for use within industrial machinery and owing to their size, it will require the assistance of a supplier whose machines are capable of undertaking large-scale work. The client is looking to collaborate with a Qimtek member, as their existing supplier is over capacity. Their massive £1million spend - along with the offer of similar work moving forward - means this project is not to be missed by those that are looking to add a potentially lucrative account to their long-term customer portfolio.

  6. Drawings count: 1

    Machining-Turning, Medium Volume

    Quotes are required for the attached handle, which is unsuitable for the client's in-house machines. These are to be made from stainless steel, in quantities of never less than 50 off. The buyer would like to hear from suppliers that can fulfil ongoing orders, to be placed on an ad-hoc basis. As they outsource £15,000 worth of machining work every year, this enquiry could also be supplemented with additional projects.

  7. Drawings count: 5

    Fabrication-General Sheet Metal Under 6mm

    The attached set of six different busbars are currently sought - legacy parts, for which there is no longer a supplier in place. Quotes are required on 1 off and 10 off of each design, for which the client will place an order in early 2018. The company behind this enquiry requires the busbars for use within an electronics application and have requested that they are supplied complete to the drawings provided.

  8. Drawings count: 1

    Machining-Gear Cutting

    This company manufactures products for the heavy vehicle/construction equipment industry, outsourcing over £50,000 worth of machining work every year. They are currently trying to allocate production of the attached gear to a UK supplier, having previously sourced from overseas. 5 off will be required every week as of January/February 2018, meaning that this enquiry will be a great match with suppliers that are looking to fill long-term capacity.

  9. Drawings count: 1

    Fabrication-General Sheet Metal Under 6mm

    The attached set of stainless steel parts are new designs, for which there is no current supplier in place. The client has an immediate order to place with an external vendor for the production of these items, due to a current lack of in-house capacity. The parts are to be profiled and folded in accordance with the specification and drawings attached, with the client looking favourably upon quotes from those that can offer a fast turnaround. Their £200,000 yearly spend on subcontract fabrication services means that there is plenty of scope for the selected supplier to develop the relationship and lend themselves to additional requirements.

  10. Drawings count: 1

    Machining-Machining, Plastics

    Plastic cam tracks, doors, guards and strips are required for end use within the industrial machinery sector. The client spends in excess of £30,000 yearly on outsourced machining, over a variety of projects. They require quotes for these items to be produced complete to the drawings attached. This is an ongoing requirement and subsequently, the buyer would like to allocate this work on a repeat basis, to a company with the applicable capabilities.

  11. Drawings count: 2

    Fabrication-General Fabrication 6-15mm

    This manufacturer of special purpose machinery outsources fabrication work to the tune of £250,000 annually. They seek immediate quotes for the attached stillages, for use within an industrial machinery project. Interested suppliers should have the applicable in-house capabilities and be able to adhere to the client's delivery schedule. Owing to the amount of work outsourced by this company, there is plenty of scope for the successful supplier to expand on their involvement with the client and diversify into additional projects.

  12. Drawings count: 5

    Fabrication-Laser cutting, tube

    Quotes are required on the attached profiled box section, with optional assembly. The company behind this enquiry subs out over £250,000 worth of fabrication work per annum and seeks the parts in question for use within a project for the agriculture industry. Those that are able to assist are asked to make contact with the client directly to discuss - this could also lead to additional work once a relationship has been established.

  13. Drawings count: 1

    Machining-CNC Machining, Low Volume

    A machining supplier is sought, in order to manufacture the attached cylinder and hinge housing. The buyer behind this enquiry has an impressive spend of £100,000 per year on bespoke machining services and currently requires quotes on 6 to 12 off of each part. These components will be used within an industrial machinery application and the client is outsourcing their manufacture due to a current lack of in-house capacity.

  14. Drawings count: 1

    Plastic & Rubber-Injection Moulding

    Suppliers that have the capabilities to injection mould the attached spade handle are asked to make contact with the buyer - a company that operates within the industrial machinery sector - at their earliest convenience. They are looking for prices on 500 to 1000 off of this component, for order placement once the machined samples have been approved. This is an opportunity to gain a new long-term customer, as the client will look to place repeat orders with the vendor they select for this work.

  15. Drawings count: 1

    Machining-Machining, Plastics

    A machining supplier is sought, in order to produce samples of the attached spade handle. The buyer behind this enquiry has an impressive spend of £100,000 per year on bespoke machining services and requires this item to be manufactured as per the drawing provided, prior to it being injection moulded at the production phase. The component will be used within an industrial machinery application and the client is outsourcing its manufacture due to a current lack of in-house capacity.

  16. Drawings count: 7

    Machining-CNC Machining, Medium Volume

    Machining suppliers with the necessary accreditation are sought, in order to produce a set of parts for end use within an automotive application. The client spends £15,000 a year on bespoke machined items and seeks quotes for these components as part of a larger job for which they are currently tendering. If successful, this will spell ongoing work for the company that they choose to work alongside - in addition, further opportunities may be extended once quality and reliability have been proven.

  17. Drawings count: 4

    Machining-Turning, Low Volume

    This project calls for the two attached parts to be turned - with a very small amount of milling also involved - for use within consumer products. The client is looking for a supplier that can provide these parts within the specified time frame, with 11 off of each required on this occasion. Those that can offer assistance are asked to make contact with the buyer as soon as possible, quoting their best price and lead time.

  18. Drawings count: 1

    Machining-Turning, High Volume

    Huge quantities of the two attached components are required, on behalf of a company that outsources over £75,000 worth of machining work every year. The client is looking for a supplier with the necessary in-house setup to meet demand, with approximately 30,000 off sets of parts required every year. The client will look to place the order in the next two months, facilitating an ideal opportunity to fill spare capacity moving into the new year.

  19. Drawings count: 3

    Fabrication-General Sheet Metal Under 6mm

    Wheel supports and wall fixings are required for use within a construction application. The client is a company that outsources in excess of £100,000 worth of fabrication work every year. They would like to hear from suppliers that can adhere to a two week lead time from the point of order placement, with ongoing orders and the possibility of additional work becoming available at a later stage. Suppliers are asked to quote their best price and delivery in order to be considered for the opportunity.

  20. Drawings count: 4

    Machining-Gear Cutting

    The four attached gear designs are to be manufactured complete to the drawings provided, on behalf of a company that operates within the automotive industry. The client has an immediate order to place for the stated quantities, which are due to repeat moving forward. They would like to work alongside a supplier that holds the necessary accreditation and has the capacity available to assist on an ongoing basis.

Pages