Qimtek

Qualified subcontract engineering projects

Are you looking to grow your business with new long term customers from the manufacturing industry?

This is a list of projects from manufacturing buyers looking for new manufacturing partners in the UK. Supplier members have access to the drawings and buyer information so they can contact them directly.

Displaying 1 - 20 of 191

  1. Drawings count: 1

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This electronics company is looking for quotes, for the manufacture of sensor guards made from 1.5mm Zintec. Please include best lead time on delivery.

  2. Drawings count: 1

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    This company is currently looking for quotes and best lead times on the 2 attached parts. Each part is made up of 3 components which require manufacture and assembly. Item SN-B100-C00-A- Quantities to make up 7 -2 off SN-B100-001-A x 7 = 14 off -3 off SN-B100-002-A x 7 = 21 off -4 off SN-B100-003-A x 7 = 28 off Item SN-B100-D00-A- Quantities to make up 14 -2 off SN-B100-001-A x 14 = 28 off -3 off SN-B100-002-A x 14 = 42 off -2 off SN-B100-003-A x 14 = 28 off Material will be Galvanised Steel

  3. Drawings count: 1

    Machining-Turning, High Volume

    Quotes required for the turning of the attached nickel and gold plated pins, used within the electronics industry. Material: BRASS 36000 1/2 HT

  4. Drawings count: 1

    Machining-Milling, Low Volume

    This buyer is seeking quotes and lead times on the attached milling of Aluminium Mounting brackets, Please note, that these parts are small and will include through and tapped holes. The buyer is also ideally looking for the parts to be supplied hard anodised. Material is 6082-T6 Aluminium.

  5. Drawings count: 2

    Electronic / Electrical-Cable Looms/Harnesses

    This buyer is currently seeking an ongoing supplier who can take on the cable production for a new manufacturing machine that is moving out of R & D to Production ready. This machine contains: * 49 different cables *AC/DC Power *Network *Sensors *Comms etc There is a loom which uses a custom made cable, which the buyer will free issue. Initially, they are looking at quantities of 5 and 10 sets. This will be ongoing work for the chosen supplier.

  6. Drawings count: 3

    Sheet Metal Forming-Enclosures

    This buyer is in urgent need of a supplier to quote the manufacture of the parts to make up two electrical boxes. Quotes are needed by tomorrow afternoon (24th April). At this stage only the metal enclosures are required Please include in your quotes the welding of the box and that there is to be a lid (image included)

  7. Drawings count: 1

    Machining-CNC Machining, Low Volume

    This client, a manufacturer of electrical security products who spends in excess of £100,000 a year on bespoke machined components, seeks a supplier who can urgently machine and deliver the attached components.

  8. Drawings count: 1

    Machining-Machining, Plastics

    The attached lamp socket is made up of 3 parts; one copper off the shelf component, which is not required and two plastic components, which are. Whilst delivery and quality are at the forefront of this enquiry, price will also be a deciding factor.

  9. Drawings count: 2

    Sheet Metal Forming-General Sheet Metal (2mm to 6mm)

    With an approximate annual spend of £350,000 in the subcontract fabrication market, this company specialises in the manufacture of transformers and power supplies. The new purchasing manager is currently performing a review of their existing suppliers and is keen to hear from Qimtek members who would be interested in manufacturing the attached tank units. The volume of fabrication work outsourced by the buyer may mean that the chosen supplier is asked to manufacture additional, similar components going forward.

  10. Drawings count: 2

    Machining-Machining, Plastics

    This client, a manufacturer of laser and IPL lamps, seeks a supplier to manufacture the attached plastic components. These are to be machined from black PEI and require turning, drilling and countersinking in accordance with the drawings provided. There is an immediate order to place with the chosen supplier, which could lead to additional work once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  11. Drawings count: 2

    Machining-Turning, High Volume

    This client, who operates within the electronics industry, seeks a supplier to manufacture the attached turned components. These are to be machined from brass and require turning, drilling and threading in accordance with the drawings provided. There is an immediate order to place with the chosen supplier, which could lead to additional work once a relationship has been established. IMPORTANT: There is a non-disclosure agreement running with this enquiry. Please print this off, complete ALL sections, sign and date it and return the page to sourcing@qimtek.co.uk or fax 01256 394600. Once received, all drawings and documents will be released to your account. **Due to the current health climate, we ask that you only submit a quotation for this project if you are in a position to fulfil the requirement.**

  12. Drawings count: 1

    Profiling-Laser cutting, tube

    Operating in the North East, this lighting manufacturer is in need of a supplier who can assist with manufacture of the attached tubes for a bespoke order. With an immediate order to place for this enquiry, the buyer has indicated that this is a one-off requirement at this stage, although the chosen supplier may be asked to quote for additional, similar enquiries going forward, once a relationship has been established.

  13. Drawings count: 4

    Machining-Machining, Plastics

    This security equipment manufacturing and installation company who outsources approximately £100,000 worth of machining each year, has recently completed a design for a new range of components to be used within their security systems. Subsequently, they are looking for a potential plastic machinist to assist with the base units. There is an immediate order to place for this enquiry and this is expected to be repeated at least 4 times per year in potentially increasing quantities going forward.

  14. Drawings count: 1

    Extrusions-Complete Manufacture & Assembly

    This marine buyer is looking to receive quotes for the extrusion and finish machining of aluminium sleeves, which are destined for use within the electronics industry. This item has previously been sourced from overseas, but now the client is keen to reshore production to the UK. Quotes are sought for a variety of price breaks, as well as for the applicable tooling. The ongoing nature of the project makes this an opportunity to win a new long-term customer, as well as the work in question.

  15. Drawings count: 3

    Full turnkey-Special Purpose Machines

    This robotics manufacturer is in need of quotations from prospective Qimtek suppliers for the attached assembly, which will require a mixture of machining and fabrication/profiling processes. There is an immediate order to place for this enquiry, with delivery sought at the supplier's earliest convenience. This is a one-off requirement, although the chosen supplier may be asked to quote for additional, similar components going forward, once a relationship has been established.

  16. Drawings count: 3

    Full turnkey-Special Purpose Machines

    This robotics manufacturer is in need of quotations from prospective Qimtek suppliers for the attached assembly, which will require a mixture of fabrication and machining processes. There is an immediate order to place for this enquiry with delivery sought at the supplier's earliest convenience. This is a one-off requirement, although the chosen supplier may be asked to quote for additional, similar designs going forward once a relationship has been established.

  17. Drawings count: 5

    Full turnkey-Special Purpose Machines

    This company specialises in the manufacture of simulators for large drilling and construction equipment. They are looking for a new supplier to manufacture, assemble and calibrate several sizes of gauge which will be used with simulators in a classroom environment. Quotes are sought for 1, 5 and 10 off of each size. The buyer is looking for a long-term relationship and will be ordering these gauges in varying quantities on an ongoing basis. Quality and finish are vitally important as these will be on show when in use by the clients. Although aluminium and plastic is shown on the materials list, the buyer is open to considering other materials if they are deemed suitable for use.

  18. Drawings count: 1

    Machining-Machining, Plastics

    Outsourcing machining work to the tune of £30,000 each year, this company is currently seeking suppliers who can manufacture the attached tube caps. These parts are in development and are to be used within the electronics sector. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss. There is an immediate order to place, with delivery required at the supplier's earliest convenience. This is currently a one-off requirement, although it could be repeated if successful.

  19. Drawings count: 6

    Machining-Turning, High Volume

    Outsourcing machining work to the tune of £30,000 each year, this company is currently seeking suppliers who can manufacture the attached range of turned parts. These parts are in development and are to be used within the electronics sector. Those that are interested in being considered for this job are asked to make contact with the buyer directly to discuss. There is an immediate order to place, with delivery required at the supplier's earliest convenience. This is currently a one-off requirement, although it could be repeated if successful.

  20. Drawings count: 6

    Sheet Metal Forming-Fine Limit Sheet Metal (up to 2mm)

    This manufacturer of cable entry systems, who outsources approximately £100,000 worth of fabrication requirements each year, is in need of a supplier who can assist with the manufacture of the attached brackets and channels. There is an immediate order to place for this enquiry and if successful, it is to be repeated in similar quantities approximately every month.

Pages